[PATCHv4 6/6] arm64: dts: ti: Add eMMC support for AM62D

[Bryan Brattlof]

On June 23, 2025 thus sayeth Paresh Bhagat:
> Add the necessary device tree node for eMMC controller along with the
> required pinmux configuration.
> 

Could this be squashed in 4/6?

> Signed-off-by: Paresh Bhagat <p-bhagat at ti.com>
> ---
>  arch/arm64/boot/dts/ti/k3-am62d2-evm.dts | 27 ++++++++++++++++++++++++
>  1 file changed, 27 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/ti/k3-am62d2-evm.dts b/arch/arm64/boot/dts/ti/k3-am62d2-evm.dts
> index c98e4c98c956..5ceecdd68b3f 100644
> --- a/arch/arm64/boot/dts/ti/k3-am62d2-evm.dts
> +++ b/arch/arm64/boot/dts/ti/k3-am62d2-evm.dts
> @@ -20,6 +20,7 @@ aliases {
>  		serial0 = &wkup_uart0;
>  		serial1 = &mcu_uart0;
>  		serial2 = &main_uart0;
> +		mmc0 = &sdhci0;
>  		mmc1 = &sdhci1;
>  		rtc0 = &wkup_rtc0;
>  		ethernet0 = &cpsw_port1;
> @@ -226,6 +227,22 @@ AM62DX_IOPAD(0x00b4, PIN_INPUT_PULLUP, 1) /* (M20) GPMC0_CSn3.I2C2_SDA */
>  		>;
>  	};
>  
> +	main_mmc0_pins_default: main-mmc0-default-pins {
> +		pinctrl-single,pins = <
> +			AM62DX_IOPAD(0x0220, PIN_INPUT_PULLUP, 0) /* (Y6) MMC0_CMD */
> +			AM62DX_IOPAD(0x0218, PIN_OUTPUT, 0) /* (AB7) MMC0_CLK */
> +			AM62DX_IOPAD(0x0214, PIN_INPUT_PULLUP, 0) /* (AA6) MMC0_DAT0 */
> +			AM62DX_IOPAD(0x0210, PIN_INPUT_PULLUP, 0) /* (AB6) MMC0_DAT1 */
> +			AM62DX_IOPAD(0x020c, PIN_INPUT_PULLUP, 0) /* (Y7) MMC0_DAT2 */
> +			AM62DX_IOPAD(0x0208, PIN_INPUT_PULLUP, 0) /* (AA7) MMC0_DAT3 */
> +			AM62DX_IOPAD(0x0204, PIN_INPUT_PULLUP, 0) /* (Y8) MMC0_DAT4 */
> +			AM62DX_IOPAD(0x0200, PIN_INPUT_PULLUP, 0) /* (W7) MMC0_DAT5 */
> +			AM62DX_IOPAD(0x01fc, PIN_INPUT_PULLUP, 0) /* (W9) MMC0_DAT6 */
> +			AM62DX_IOPAD(0x01f8, PIN_INPUT_PULLUP, 0) /* (AB8) MMC0_DAT7 */
> +		>;
> +		bootph-all;
> +	};
> +
>  	main_mmc1_pins_default: main-mmc1-default-pins {
>  		pinctrl-single,pins = <
>  			AM62DX_IOPAD(0x023c, PIN_INPUT, 0) /* (C21) MMC1_CMD */
> @@ -397,6 +414,16 @@ &main_i2c2 {
>  	clock-frequency = <400000>;
>  };
>  
> +&sdhci0 {
> +	/* eMMC */
> +	bootph-all;
> +	status = "okay";
> +	non-removable;
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&main_mmc0_pins_default>;
> +	disable-wp;
> +};

Make sure we follow the ordering of these properties:

    https://www.kernel.org/doc/html/latest/devicetree/bindings/dts-coding-style.html#order-of-properties-in-device-node

> +
>  &sdhci1 {
>  	/* SD/MMC */
>  	status = "okay";
> -- 
> 2.34.1
>