[PATCHv4 1/6] arm64: dts: ti: Add bootph property to nodes at source for am62a
Paresh Bhagat
p-bhagat at ti.com
Mon Jun 23 07:12:48 PDT 2025
Add bootph property directly into the original definitions of relevant
nodes (e.g., power domains, USB controllers, and other peripherals)
within their respective DTSI files (ex. main, mcu, and wakeup)i for
am62a.
By defining bootph in the nodes source definitions instead of appending
it later in final DTS files, this change ensures that the property is
inherently present wherever the nodes are reused across derived device
trees.
Signed-off-by: Paresh Bhagat <p-bhagat at ti.com>
---
arch/arm64/boot/dts/ti/k3-am62a-main.dtsi | 15 +++++++++++++++
arch/arm64/boot/dts/ti/k3-am62a-mcu.dtsi | 1 +
arch/arm64/boot/dts/ti/k3-am62a-wakeup.dtsi | 3 +++
arch/arm64/boot/dts/ti/k3-am62a.dtsi | 3 +++
4 files changed, 22 insertions(+)
diff --git a/arch/arm64/boot/dts/ti/k3-am62a-main.dtsi b/arch/arm64/boot/dts/ti/k3-am62a-main.dtsi
index 63e097ddf988..1b7fe4487475 100644
--- a/arch/arm64/boot/dts/ti/k3-am62a-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62a-main.dtsi
@@ -51,6 +51,7 @@ phy_gmii_sel: phy at 4044 {
compatible = "ti,am654-phy-gmii-sel";
reg = <0x4044 0x8>;
#phy-cells = <1>;
+ bootph-all;
};
epwm_tbclk: clock-controller at 4130 {
@@ -84,6 +85,7 @@ dmss: bus at 48000000 {
#size-cells = <2>;
dma-ranges;
ranges = <0x00 0x48000000 0x00 0x48000000 0x00 0x06000000>;
+ bootph-all;
ti,sci-dev-id = <25>;
@@ -96,6 +98,7 @@ secure_proxy_main: mailbox at 4d000000 {
#mbox-cells = <1>;
interrupt-names = "rx_012";
interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+ bootph-all;
};
inta_main_dmss: interrupt-controller at 48000000 {
@@ -131,6 +134,7 @@ main_bcdma: dma-controller at 485c0100 {
ti,sci-rm-range-bchan = <0x20>; /* BLOCK_COPY_CHAN */
ti,sci-rm-range-rchan = <0x21>; /* SPLIT_TR_RX_CHAN */
ti,sci-rm-range-tchan = <0x22>; /* SPLIT_TR_TX_CHAN */
+ bootph-all;
};
main_pktdma: dma-controller at 485c0000 {
@@ -167,6 +171,7 @@ main_pktdma: dma-controller at 485c0000 {
<0x2c>, /* FLOW_CPSW_RX_CHAN */
<0x2e>, /* FLOW_SAUL_RX_0/1_CHAN */
<0x32>; /* FLOW_SAUL_RX_2/3_CHAN */
+ bootph-all;
};
};
@@ -216,20 +221,24 @@ dmsc: system-controller at 44043000 {
mbox-names = "rx", "tx";
mboxes = <&secure_proxy_main 12>,
<&secure_proxy_main 13>;
+ bootph-all;
k3_pds: power-controller {
compatible = "ti,sci-pm-domain";
#power-domain-cells = <2>;
+ bootph-all;
};
k3_clks: clock-controller {
compatible = "ti,k2g-sci-clk";
#clock-cells = <2>;
+ bootph-all;
};
k3_reset: reset-controller {
compatible = "ti,sci-reset";
#reset-cells = <2>;
+ bootph-all;
};
};
@@ -254,6 +263,7 @@ secure_proxy_sa3: mailbox at 43600000 {
* firmware on non-MPU processors
*/
status = "disabled";
+ bootph-all;
};
main_pmx0: pinctrl at f4000 {
@@ -262,6 +272,7 @@ main_pmx0: pinctrl at f4000 {
#pinctrl-cells = <1>;
pinctrl-single,register-width = <32>;
pinctrl-single,function-mask = <0xffffffff>;
+ bootph-all;
};
main_esm: esm at 420000 {
@@ -282,6 +293,7 @@ main_timer0: timer at 2400000 {
assigned-clock-parents = <&k3_clks 36 3>;
power-domains = <&k3_pds 36 TI_SCI_PD_EXCLUSIVE>;
ti,timer-pwm;
+ bootph-all;
};
main_timer1: timer at 2410000 {
@@ -653,6 +665,7 @@ usb0: usb at 31000000 {
dr_mode = "otg";
snps,usb2-gadget-lpm-disable;
snps,usb2-lpm-disable;
+ bootph-all;
};
};
@@ -745,6 +758,7 @@ cpsw_port1: port at 1 {
phys = <&phy_gmii_sel 1>;
mac-address = [00 00 00 00 00 00];
ti,syscon-efuse = <&cpsw_mac_syscon 0x0>;
+ bootph-all;
};
cpsw_port2: port at 2 {
@@ -764,6 +778,7 @@ cpsw3g_mdio: mdio at f00 {
clocks = <&k3_clks 13 0>;
clock-names = "fck";
bus_freq = <1000000>;
+ bootph-all;
};
cpts at 3d000 {
diff --git a/arch/arm64/boot/dts/ti/k3-am62a-mcu.dtsi b/arch/arm64/boot/dts/ti/k3-am62a-mcu.dtsi
index ee961ced7208..df4aa131097f 100644
--- a/arch/arm64/boot/dts/ti/k3-am62a-mcu.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62a-mcu.dtsi
@@ -12,6 +12,7 @@ mcu_pmx0: pinctrl at 4084000 {
#pinctrl-cells = <1>;
pinctrl-single,register-width = <32>;
pinctrl-single,function-mask = <0xffffffff>;
+ bootph-all;
};
mcu_esm: esm at 4100000 {
diff --git a/arch/arm64/boot/dts/ti/k3-am62a-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-am62a-wakeup.dtsi
index 259ae6ebbfb5..86aae252385c 100644
--- a/arch/arm64/boot/dts/ti/k3-am62a-wakeup.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62a-wakeup.dtsi
@@ -13,10 +13,12 @@ wkup_conf: bus at 43000000 {
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x00 0x00 0x43000000 0x20000>;
+ bootph-all;
chipid: chipid at 14 {
compatible = "ti,am654-chipid";
reg = <0x14 0x4>;
+ bootph-all;
};
opp_efuse_table: syscon at 18 {
@@ -67,6 +69,7 @@ wkup_uart0: serial at 0 {
reg = <0 0x100>;
interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
+ bootph-pre-ram;
};
};
diff --git a/arch/arm64/boot/dts/ti/k3-am62a.dtsi b/arch/arm64/boot/dts/ti/k3-am62a.dtsi
index 4d79b3e9486a..54eab2c93eff 100644
--- a/arch/arm64/boot/dts/ti/k3-am62a.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62a.dtsi
@@ -50,6 +50,7 @@ cbass_main: bus at f0000 {
compatible = "simple-bus";
#address-cells = <2>;
#size-cells = <2>;
+ bootph-all;
ranges = <0x00 0x000f0000 0x00 0x000f0000 0x00 0x00030000>, /* Main MMRs */
<0x00 0x00420000 0x00 0x00420000 0x00 0x00001000>, /* ESM0 */
@@ -104,6 +105,7 @@ cbass_mcu: bus at 4000000 {
<0x00 0x79020000 0x00 0x79020000 0x00 0x00008000>, /* MCU R5 BTCM */
<0x00 0x79100000 0x00 0x79100000 0x00 0x00040000>, /* MCU IRAM0 */
<0x00 0x79140000 0x00 0x79140000 0x00 0x00040000>; /* MCU IRAM1 */
+ bootph-all;
};
cbass_wakeup: bus at b00000 {
@@ -115,6 +117,7 @@ cbass_wakeup: bus at b00000 {
<0x00 0x43000000 0x00 0x43000000 0x00 0x00020000>, /* WKUP CTRL MMR */
<0x00 0x78000000 0x00 0x78000000 0x00 0x00008000>, /* DM R5 ATCM*/
<0x00 0x78100000 0x00 0x78100000 0x00 0x00008000>; /* DM R5 BTCM*/
+ bootph-all;
};
};
--
2.34.1
More information about the linux-arm-kernel
mailing list