[PATCH v3 2/2] clk: xilinx: vcu: Update vcu init/reset sequence

[Stephen Boyd]

Quoting Rohit Visavalia (2025-02-10 03:36:14)
> Updated vcu init/reset sequence as per design changes.
> If VCU reset GPIO is available then do assert and de-assert it before
> enabling/disabling gasket isolation.
> This GPIO is added because gasket isolation will be removed during startup
> that requires access to SLCR register space. Post startup, the ownership of
> the register interface lies with logiCORE IP.
> 
> Signed-off-by: Rohit Visavalia <rohit.visavalia at amd.com>
> ---

Applied to clk-next