[RFC PATCH v6 4/4] phy: rockchip-pcie: Properly disable TEST_WRITE strobe signal

[Geraldo Nascimento]

pcie_conf is used to touch TEST_WRITE strobe signal. This signal should
be enabled, a little time waited, and then disabled. Current code clearly
was copy-pasted and never disables the strobe signal. Adjust the define.
While at it, remove PHY_CFG_RD_MASK which has been unused since
64cdc0360811 ("phy: rockchip-pcie: remove unused phy_rd_cfg function").

Signed-off-by: Geraldo Nascimento <geraldogabriel at gmail.com>
---
 drivers/phy/rockchip/phy-rockchip-pcie.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/drivers/phy/rockchip/phy-rockchip-pcie.c b/drivers/phy/rockchip/phy-rockchip-pcie.c
index f22ffb41cdc2..4e2dfd01adf2 100644
--- a/drivers/phy/rockchip/phy-rockchip-pcie.c
+++ b/drivers/phy/rockchip/phy-rockchip-pcie.c
@@ -30,9 +30,8 @@
 #define PHY_CFG_ADDR_SHIFT    1
 #define PHY_CFG_DATA_MASK     0xf
 #define PHY_CFG_ADDR_MASK     0x3f
-#define PHY_CFG_RD_MASK       0x3ff
 #define PHY_CFG_WR_ENABLE     1
-#define PHY_CFG_WR_DISABLE    1
+#define PHY_CFG_WR_DISABLE    0
 #define PHY_CFG_WR_SHIFT      0
 #define PHY_CFG_WR_MASK       1
 #define PHY_CFG_PLL_LOCK      0x10
-- 
2.49.0