[PATCH 6/7] pinctrl: aspeed-g6: Add PCIe RC PERST pin group

[Andrew Jeffery]

On Fri, 2025-06-13 at 11:30 +0800, Jacky Chou wrote:
> The PCIe RC PERST uses SSPRST# as PERST#  and enable this pin
> to output.
> 
> Signed-off-by: Jacky Chou <jacky_chou at aspeedtech.com>
> ---
>  drivers/pinctrl/aspeed/pinctrl-aspeed-g6.c | 12 +++++++++++-
>  1 file changed, 11 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/pinctrl/aspeed/pinctrl-aspeed-g6.c b/drivers/pinctrl/aspeed/pinctrl-aspeed-g6.c
> index 5a7cd0a88687..c751703acdb9 100644
> --- a/drivers/pinctrl/aspeed/pinctrl-aspeed-g6.c
> +++ b/drivers/pinctrl/aspeed/pinctrl-aspeed-g6.c
> @@ -17,6 +17,7 @@
>  #include "../pinctrl-utils.h"
>  #include "pinctrl-aspeed.h"
>  
> +#define SCU040         0x040 /* Reset Control Set 1  */
>  #define SCU400         0x400 /* Multi-function Pin Control #1  */
>  #define SCU404         0x404 /* Multi-function Pin Control #2  */
>  #define SCU40C         0x40C /* Multi-function Pin Control #3  */
> @@ -52,7 +53,7 @@
>  #define SCU6D0         0x6D0 /* Multi-function Pin Control #29 */
>  #define SCUC20         0xC20 /* PCIE configuration Setting Control */
>  
> -#define ASPEED_G6_NR_PINS 256
> +#define ASPEED_G6_NR_PINS 258
>  
>  #define M24 0
>  SIG_EXPR_LIST_DECL_SESG(M24, MDC3, MDIO3, SIG_DESC_SET(SCU410, 0));
> @@ -1636,6 +1637,12 @@ FUNC_DECL_1(USB11BHID, USBB);
>  FUNC_DECL_1(USB2BD, USBB);
>  FUNC_DECL_1(USB2BH, USBB);
>  
> +#define D7 257
> +SIG_EXPR_LIST_DECL_SESG(D7, RCRST, PCIERC1, SIG_DESC_SET(SCU040, 19),

The documentation for SCU040[19] says it will assert the reset. I
expect that's not what's desired.

> +                       SIG_DESC_SET(SCU500, 24));

SCU500[24] seems okay.

> +PIN_DECL_(D7, SIG_EXPR_LIST_PTR(D7, RCRST));
> +FUNC_GROUP_DECL(PCIERC1, D7);

It only makes sense to describe pins with multiple functions. The other
function this pin has is the reset line for the secondary service
processor. Can we describe that too?

Andrew