[PATCH net 4/4] net: axienet: Split into MAC and MDIO drivers

[Sean Anderson]

On 6/19/25 19:10, Jakub Kicinski wrote:
> On Thu, 19 Jun 2025 16:05:37 -0400 Sean Anderson wrote:
>> Returning EPROBE_DEFER after probing a bus may result in an infinite
>> probe loop if the EPROBE_DEFER error is never resolved. For example, if
>> the PCS is located on another MDIO bus and that MDIO bus is missing its
>> driver then we will always return EPROBE_DEFER. But if there are any
>> devices on our own MDIO bus (such as PHYs), those devices will be
>> successfully bound before we fail our own probe. This will cause the
>> deferred probing infrastructure to continuously try to probe our device.
>> 
>> To prevent this, split the MAC and MDIO functionality into separate
>> auxiliary devices. These can then be re-probed independently.
> 
> There's a, pardon the expression, C++-like build failure here
> culminating in:
> 
> drivers/net/ethernet/xilinx/xilinx_axienet_main.c:3225:1: error: redefinition of '__exittest'
> drivers/net/ethernet/xilinx/xilinx_axienet_main.c:3225:1: error: redefinition of '__inittest'
> drivers/net/ethernet/xilinx/xilinx_axienet_main.c:3225:1: error: redefinition of 'init_module'
> drivers/net/ethernet/xilinx/xilinx_axienet_main.c:3225:1: error: redefinition of 'cleanup_module'
> 
> I'm guessing the existing module_platform_driver() and the new
> module_auxiliary_driver() don't want to be friends when this 
> code is built as a module?

Hm, I thought I had built this as a module. I guess not. Will fix.

--Sean