[PATCH] mfd: axp20x: Set explicit ID for AXP313 regulator

[Chen-Yu Tsai]

From: Chen-Yu Tsai <wens at csie.org>

On newer boards featuring the A523 SoC, the AXP323 (related to the
AXP313) is paired with the AXP717 and serves as a secondary PMIC
providing additional regulator outputs. However the mfd cells are all
registered with PLATFORM_DEVID_NONE, which causes the regulator cells
to conflict with each other.

Commit e37ec3218870 ("mfd: axp20x: Allow multiple regulators") attempted
to fix this by switching to PLATFORM_DEVID_AUTO so that the device names
would all be different, however that broke IIO channel mapping, which is
also tied to the device names. As a result the change was later reverted.

Instead, here we attempt to make sure the AXP313/AXP323 regulator cell
does not conflict by explicitly giving it an ID number. This was
previously done for the AXP809+AXP806 pair used with the A80 SoC.

Signed-off-by: Chen-Yu Tsai <wens at csie.org>
---
 drivers/mfd/axp20x.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/mfd/axp20x.c b/drivers/mfd/axp20x.c
index e9914e8a29a3..25c639b348cd 100644
--- a/drivers/mfd/axp20x.c
+++ b/drivers/mfd/axp20x.c
@@ -1053,7 +1053,8 @@ static const struct mfd_cell axp152_cells[] = {
 };
 
 static struct mfd_cell axp313a_cells[] = {
-	MFD_CELL_NAME("axp20x-regulator"),
+	/* AXP323 is sometimes paired with AXP717 as sub-PMIC */
+	MFD_CELL_BASIC("axp20x-regulator", NULL, NULL, 0, 1),
 	MFD_CELL_RES("axp313a-pek", axp313a_pek_resources),
 };
 
-- 
2.39.5