[PATCH v3 1/1] dt-bindings: mmc: mxs-mmc: change ref to mmc-controller-common.yaml from mmc-controller.yaml

Ulf Hansson ulf.hansson at linaro.org
Thu Jun 19 04:19:54 PDT 2025


On Tue, 3 Jun 2025 at 17:23, Frank Li <Frank.Li at nxp.com> wrote:
>
> Change ref to mmc-controller-common.yaml from mmc-controller.yaml because
> imx23/imx28 use dual mode controller (spi and mmc). So default dts node
> name use spi instead of mmc. The legacy reason, it use difference
> compatible string to distringuish work mode (spi / mmc).
>
> Fix below CHECK_DTB warnings:
> arch/arm/boot/dts/nxp/mxs/imx23-olinuxino.dtb: spi at 80010000 (fsl,imx23-mmc): $nodename:0: 'spi at 80010000' does not match '^mmc(@.*)?$'
>
> Additional add clocks property.
>
> Signed-off-by: Frank Li <Frank.Li at nxp.com>

Applied for next, thanks!

Kind regards
Uffe


> ---
> change in v3
> - add clocks in example to fix dt_binding_check warnings/errors.
>
> change in v2
> - add clocks to required
> - fix typo legancy in commit message
> ---
>  Documentation/devicetree/bindings/mmc/mxs-mmc.yaml | 7 ++++++-
>  1 file changed, 6 insertions(+), 1 deletion(-)
>
> diff --git a/Documentation/devicetree/bindings/mmc/mxs-mmc.yaml b/Documentation/devicetree/bindings/mmc/mxs-mmc.yaml
> index 32e512a68ed61..df07ea3b81d15 100644
> --- a/Documentation/devicetree/bindings/mmc/mxs-mmc.yaml
> +++ b/Documentation/devicetree/bindings/mmc/mxs-mmc.yaml
> @@ -17,7 +17,7 @@ description: |
>    and the properties used by the mxsmmc driver.
>
>  allOf:
> -  - $ref: mmc-controller.yaml
> +  - $ref: mmc-controller-common.yaml#
>
>  properties:
>    compatible:
> @@ -31,6 +31,9 @@ properties:
>    interrupts:
>      maxItems: 1
>
> +  clocks:
> +    maxItems: 1
> +
>    dmas:
>      maxItems: 1
>
> @@ -41,6 +44,7 @@ required:
>    - compatible
>    - reg
>    - interrupts
> +  - clocks
>    - dmas
>    - dma-names
>
> @@ -52,6 +56,7 @@ examples:
>          compatible = "fsl,imx28-mmc";
>          reg = <0x80010000 2000>;
>          interrupts = <96>;
> +        clocks = <&clks 46>;
>          dmas = <&dma_apbh 0>;
>          dma-names = "rx-tx";
>          bus-width = <8>;
> --
> 2.34.1
>



More information about the linux-arm-kernel mailing list