[PATCH 2/4] arm64: dts: imx93-phyboard-segin: Add PEB-EVAL-01 overlay

[Primoz Fiser]

Add overlay to support PEB-EVAL-01 adapter on phyBOARD-Segin-i.MX93.
This is a PHYTEC evaluation module with three LEDs and two input buttons
that users can attach to the board expansion connector X16.

Note that, due to compatibility with existing PHYTEC platforms using the
phyBOARD-Segin carrier board such as i.MX6UL and STM32MP1, we face some
hardware limitations and can thus only support one user LED (D2) and one
button (S2) on the i.MX93 variant of the phyBOARD-Segin.

Signed-off-by: Primoz Fiser <primoz.fiser at norik.com>
---
 arch/arm64/boot/dts/freescale/Makefile        |  2 +
 .../imx93-phyboard-segin-peb-eval-01.dtso     | 52 +++++++++++++++++++
 2 files changed, 54 insertions(+)
 create mode 100644 arch/arm64/boot/dts/freescale/imx93-phyboard-segin-peb-eval-01.dtso

diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile
index 08a1de299538..011b2d58e4f7 100644
--- a/arch/arm64/boot/dts/freescale/Makefile
+++ b/arch/arm64/boot/dts/freescale/Makefile
@@ -325,7 +325,9 @@ dtb-$(CONFIG_ARCH_MXC) += imx93-kontron-bl-osm-s.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx93-phyboard-nash.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx93-phyboard-segin.dtb
 
+imx93-phyboard-segin-peb-eval-01-dtbs += imx93-phyboard-segin.dtb imx93-phyboard-segin-peb-eval-01.dtbo
 imx93-phycore-rpmsg-dtbs += imx93-phyboard-nash.dtb imx93-phyboard-segin.dtb imx93-phycore-rpmsg.dtbo
+dtb-$(CONFIG_ARCH_MXC) += imx93-phyboard-segin-peb-eval-01.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx93-phycore-rpmsg.dtb
 
 dtb-$(CONFIG_ARCH_MXC) += imx93-tqma9352-mba91xxca.dtb
diff --git a/arch/arm64/boot/dts/freescale/imx93-phyboard-segin-peb-eval-01.dtso b/arch/arm64/boot/dts/freescale/imx93-phyboard-segin-peb-eval-01.dtso
new file mode 100644
index 000000000000..8039aa1ddfba
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx93-phyboard-segin-peb-eval-01.dtso
@@ -0,0 +1,52 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2025 PHYTEC Messtechnik GmbH
+ * Author: Andrej Picej <andrej.picej at norik.com>
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include "imx93-pinfunc.h"
+
+&{/} {
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_keys>;
+
+		button-s2 {
+			label = "sleep";
+			linux,code = <KEY_SLEEP>;
+			gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
+			wakeup-source;
+		};
+	};
+
+	user-leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_user_leds>;
+
+		user-led2 {
+			gpios = <&gpio4 13 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+	};
+};
+
+&iomuxc {
+	pinctrl_gpio_keys: gpiokeysgrp {
+		fsl,pins = <
+			MX93_PAD_PDM_BIT_STREAM1__GPIO1_IO10	0x31e
+		>;
+	};
+
+	pinctrl_user_leds: userledsgrp {
+		fsl,pins = <
+			MX93_PAD_ENET1_RD3__GPIO4_IO13		0x31e
+		>;
+	};
+};
-- 
2.34.1