[PATCH v1 1/2] dt-binding: pci-imx6: Add external reference clock mode support

[Frank Li]

On Wed, Jun 18, 2025 at 03:48:47PM +0800, Richard Zhu wrote:
> On i.MX, the PCIe reference clock might come from either internal
> system PLL or external clock source.
> Add the external reference clock source for reference clock.
>
> Signed-off-by: Richard Zhu <hongxing.zhu at nxp.com>
> ---
>  Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.yaml | 7 ++++++-
>  1 file changed, 6 insertions(+), 1 deletion(-)
>
> diff --git a/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.yaml b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.yaml
> index ca5f2970f217..4b99fa8e7a25 100644
> --- a/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.yaml
> +++ b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.yaml
> @@ -219,7 +219,12 @@ allOf:
>              - const: pcie_bus
>              - const: pcie_phy
>              - const: pcie_aux
> -            - const: ref
> +            - description: PCIe reference clock.
> +              oneOf:
> +              - description: The controller might be configured clocking
> +                  coming in from either an internal system PLL or an
> +                  external clock source.

start from new line

description:
  The controller's reference clock can come from one of two clock sources,
  internal system PLL or external OSC clock source.

> +              enum: [ref, gio]

gio? maybe 'ext' is better.

Suggest use b4 to avoid missed device tree mail list

Frank
>
>  unevaluatedProperties: false
>
> --
> 2.37.1
>