[PATCH v5 26/27] docs: arm64: gic-v5: Document booting requirements for GICv5

[Lorenzo Pieralisi]

Document the requirements for booting a kernel on a system implementing
a GICv5 interrupt controller.

Specifically, other than DT/ACPI providing the required firmware
representation, define what traps must be disabled if the kernel is
booted at EL1 on a system where EL2 is implemented.

Signed-off-by: Lorenzo Pieralisi <lpieralisi at kernel.org>
Cc: Will Deacon <will at kernel.org>
Cc: Catalin Marinas <catalin.marinas at arm.com>
Cc: Marc Zyngier <maz at kernel.org>
---
 Documentation/arch/arm64/booting.rst | 41 ++++++++++++++++++++++++++++++++++++
 1 file changed, 41 insertions(+)

diff --git a/Documentation/arch/arm64/booting.rst b/Documentation/arch/arm64/booting.rst
index dee7b6de864f..4b1d416c6016 100644
--- a/Documentation/arch/arm64/booting.rst
+++ b/Documentation/arch/arm64/booting.rst
@@ -223,6 +223,47 @@ Before jumping into the kernel, the following conditions must be met:
 
     - SCR_EL3.HCE (bit 8) must be initialised to 0b1.
 
+  For systems with a GICv5 interrupt controller to be used in v5 mode:
+
+  - If the kernel is entered at EL1 and EL2 is present:
+
+      - ICH_HFGRTR_EL2.ICC_PPI_ACTIVERn_EL1 (bit 20) must be initialised to 0b1.
+      - ICH_HFGRTR_EL2.ICC_PPI_PRIORITYRn_EL1 (bit 19) must be initialised to 0b1.
+      - ICH_HFGRTR_EL2.ICC_PPI_PENDRn_EL1 (bit 18) must be initialised to 0b1.
+      - ICH_HFGRTR_EL2.ICC_PPI_ENABLERn_EL1 (bit 17) must be initialised to 0b1.
+      - ICH_HFGRTR_EL2.ICC_PPI_HMRn_EL1 (bit 16) must be initialised to 0b1.
+      - ICH_HFGRTR_EL2.ICC_IAFFIDR_EL1 (bit 7) must be initialised to 0b1.
+      - ICH_HFGRTR_EL2.ICC_ICSR_EL1 (bit 6) must be initialised to 0b1.
+      - ICH_HFGRTR_EL2.ICC_PCR_EL1 (bit 5) must be initialised to 0b1.
+      - ICH_HFGRTR_EL2.ICC_HPPIR_EL1 (bit 4) must be initialised to 0b1.
+      - ICH_HFGRTR_EL2.ICC_HAPR_EL1 (bit 3) must be initialised to 0b1.
+      - ICH_HFGRTR_EL2.ICC_CR0_EL1 (bit 2) must be initialised to 0b1.
+      - ICH_HFGRTR_EL2.ICC_IDRn_EL1 (bit 1) must be initialised to 0b1.
+      - ICH_HFGRTR_EL2.ICC_APR_EL1 (bit 0) must be initialised to 0b1.
+
+      - ICH_HFGWTR_EL2.ICC_PPI_ACTIVERn_EL1 (bit 20) must be initialised to 0b1.
+      - ICH_HFGWTR_EL2.ICC_PPI_PRIORITYRn_EL1 (bit 19) must be initialised to 0b1.
+      - ICH_HFGWTR_EL2.ICC_PPI_PENDRn_EL1 (bit 18) must be initialised to 0b1.
+      - ICH_HFGWTR_EL2.ICC_PPI_ENABLERn_EL1 (bit 17) must be initialised to 0b1.
+      - ICH_HFGWTR_EL2.ICC_ICSR_EL1 (bit 6) must be initialised to 0b1.
+      - ICH_HFGWTR_EL2.ICC_PCR_EL1 (bit 5) must be initialised to 0b1.
+      - ICH_HFGWTR_EL2.ICC_CR0_EL1 (bit 2) must be initialised to 0b1.
+      - ICH_HFGWTR_EL2.ICC_APR_EL1 (bit 0) must be initialised to 0b1.
+
+      - ICH_HFGITR_EL2.GICRCDNMIA (bit 10) must be initialised to 0b1.
+      - ICH_HFGITR_EL2.GICRCDIA (bit 9) must be initialised to 0b1.
+      - ICH_HFGITR_EL2.GICCDDI (bit 8) must be initialised to 0b1.
+      - ICH_HFGITR_EL2.GICCDEOI (bit 7) must be initialised to 0b1.
+      - ICH_HFGITR_EL2.GICCDHM (bit 6) must be initialised to 0b1.
+      - ICH_HFGITR_EL2.GICCDRCFG (bit 5) must be initialised to 0b1.
+      - ICH_HFGITR_EL2.GICCDPEND (bit 4) must be initialised to 0b1.
+      - ICH_HFGITR_EL2.GICCDAFF (bit 3) must be initialised to 0b1.
+      - ICH_HFGITR_EL2.GICCDPRI (bit 2) must be initialised to 0b1.
+      - ICH_HFGITR_EL2.GICCDDIS (bit 1) must be initialised to 0b1.
+      - ICH_HFGITR_EL2.GICCDEN (bit 0) must be initialised to 0b1.
+
+  - The DT or ACPI tables must describe a GICv5 interrupt controller.
+
   For systems with a GICv3 interrupt controller to be used in v3 mode:
   - If EL3 is present:
 

-- 
2.48.0