[PATCH v3 13/17] drm/mediatek: add BLENDER support for MT8196

[CK Hu (胡俊光)]

On Thu, 2025-05-15 at 17:34 +0800, paul-pl.chen wrote:
> From: Paul-pl Chen <paul-pl.chen at mediatek.com>
> 
> BLENDER executes the alpha blending function for overlapping
> layers from different sources, which is the primary function
> of the overlapping system.
> 
> Signed-off-by: Nancy Lin <nancy.lin at mediatek.com>
> Signed-off-by: Paul-pl Chen <paul-pl.chen at mediatek.com>
> ---

[snip]

> +++ b/drivers/gpu/drm/mediatek/mtk_disp_blender.c
> @@ -0,0 +1,264 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * Copyright (c) 2025 MediaTek Inc.
> + */
> +
> +#include <drm/drm_fourcc.h>
> +#include <drm/drm_blend.h>
> +#include <drm/drm_framebuffer.h>
> +#include <linux/clk.h>
> +#include <linux/component.h>
> +#include <linux/of.h>
> +#include <linux/of_device.h>
> +#include <linux/of_address.h>
> +#include <linux/platform_device.h>
> +#include <linux/reset.h>
> +#include <linux/soc/mediatek/mtk-cmdq.h>
> +#include <linux/soc/mediatek/mtk-mmsys.h>
> +
> +#include "mtk_crtc.h"
> +#include "mtk_ddp_comp.h"
> +#include "mtk_disp_drv.h"
> +#include "mtk_drm_drv.h"

alphabetic order.

> +#include "mtk_disp_blender.h"
> +#include "mtk_disp_ovl.h"
> +
> 

[snip]

> +
> +void mtk_disp_blender_config(struct device *dev, unsigned int w,
> +			     unsigned int h, unsigned int vrefresh,
> +			     unsigned int bpc, bool most_top,

vrefresh and bpc is useless, so drop them.

> +			     bool most_bottom, struct cmdq_pkt *cmdq_pkt)
> +{
> +	struct mtk_disp_blender *priv = dev_get_drvdata(dev);
> +	u32 datapath;
> +
> +	dev_dbg(dev, "%s-w:%d, h:%d\n", __func__, w, h);
> +	mtk_ddp_write(cmdq_pkt, h << 16 | w, &priv->cmdq_reg, priv->regs,
> +		      DISP_REG_OVL_BLD_ROI_SIZE);
> +	mtk_ddp_write(cmdq_pkt, DISP_REG_OVL_BLD_BGCLR_BALCK, &priv->cmdq_reg, priv->regs,
> +		      DISP_REG_OVL_BLD_BGCLR_CLR);
> +
> +	/*
> +	 * The input source of blender layer can be EXDMA layer output or
> +	 * the blender constant layer itself.
> +	 * This color setting is configured for the blender constant layer.
> +	 */
> +	mtk_ddp_write(cmdq_pkt, DISP_REG_OVL_BLD_BGCLR_BALCK, &priv->cmdq_reg, priv->regs,
> +		      DISP_REG_OVL_BLD_L0_CLR);
> +
> +	if (most_top)
> +		datapath = OVL_BLD_BGCLR_OUT_TO_PROC;
> +	else
> +		datapath = OVL_BLD_BGCLR_OUT_TO_NEXT_LAYER;
> +	/*
> +	 * The primary input is from EXDMA and the second input
> +	 * is optionally from another blender
> +	 */
> +	if (!most_bottom)
> +		datapath |= OVL_BLD_BGCLR_IN_SEL;
> +
> +	mtk_ddp_write_mask(cmdq_pkt, datapath,
> +			   &priv->cmdq_reg, priv->regs, DISP_REG_OVL_BLD_DATAPATH_CON,
> +			   OVL_BLD_BGCLR_OUT_TO_PROC | OVL_BLD_BGCLR_OUT_TO_NEXT_LAYER |
> +			   OVL_BLD_BGCLR_IN_SEL);
> +}
> +
> +void mtk_disp_blender_start(struct device *dev, struct cmdq_pkt *cmdq_pkt)

Drop cmdq_pkt.

> +{
> +	struct mtk_disp_blender *priv = dev_get_drvdata(dev);
> +
> +	mtk_ddp_write_mask(cmdq_pkt, OVL_BLD_BYPASS_SHADOW, &priv->cmdq_reg, priv->regs,
> +			   DISP_REG_OVL_BLD_SHADOW_CTRL, OVL_BLD_BYPASS_SHADOW);
> +	mtk_ddp_write_mask(cmdq_pkt, OVL_BLD_EN, &priv->cmdq_reg, priv->regs,
> +			   DISP_REG_OVL_BLD_EN, OVL_BLD_EN);
> +}
> +
> +void mtk_disp_blender_stop(struct device *dev, struct cmdq_pkt *cmdq_pkt)

Drop cmdq_pkt.

Regards,
CK

> +{
> +	struct mtk_disp_blender *priv = dev_get_drvdata(dev);
> +
> +	mtk_ddp_write_mask(cmdq_pkt, 0, &priv->cmdq_reg, priv->regs,
> +			   DISP_REG_OVL_BLD_EN, OVL_BLD_EN);
> +
> +	mtk_ddp_write_mask(cmdq_pkt, OVL_BLD_RST, &priv->cmdq_reg, priv->regs,
> +			   DISP_REG_OVL_BLD_RST, OVL_BLD_RST);
> +	mtk_ddp_write_mask(cmdq_pkt, 0, &priv->cmdq_reg, priv->regs,
> +			   DISP_REG_OVL_BLD_RST, OVL_BLD_RST);
> +}
> +