[PATCH v2 0/4] Support for Adreno X1-45 GPU

[Akhil P Oommen]

On 6/15/2025 12:12 AM, Konrad Dybcio wrote:
> On 6/12/25 11:19 PM, Akhil P Oommen wrote:
>> On 6/12/2025 5:32 PM, Jens Glathe wrote:
>>> On 6/11/25 13:15, Akhil P Oommen wrote:
>>>
>>>> Add support for X1-45 GPU found in X1P41200 chipset (8 cpu core
>>>> version). X1-45 is a smaller version of X1-85 with lower core count and
>>>> smaller memories. From UMD perspective, this is similar to "FD735"
>>>> present in Mesa.
>>>>
>>> Hi Akhil,
>>>
>>> when loading the driver (still without firmware files) I'm getting a
>>> speedbin warning:
>>>
>>> [    3.318341] adreno 3d00000.gpu: [drm:a6xx_gpu_init [msm]] *ERROR*
>>> missing support for speed-bin: 233. Some OPPs may not be supported by
>>> hardware
>>>
>>> I've seen that there is a table for speed bins, this one is not there.
>>> Tested on a Lenovo ThinkBook 16 G7 QOY.
>>
>> Hi Jens,
>>
>> Could you please try the below patch?
>>
>> diff --git a/drivers/gpu/drm/msm/adreno/a6xx_catalog.c
>> b/drivers/gpu/drm/msm/adreno/a6xx_catalog.c
>> index 2db748ce7df5..7748f92919b8 100644
>> --- a/drivers/gpu/drm/msm/adreno/a6xx_catalog.c
>> +++ b/drivers/gpu/drm/msm/adreno/a6xx_catalog.c
>> @@ -1510,7 +1510,8 @@ static const struct adreno_info a7xx_gpus[] = {
>>                         { 0,   0 },
>>                         { 294, 1 },
>>                         { 263, 2 },
>> -                       { 141, 3 },
>> +                       { 233, 3 },
>> +                       { 141, 4 },
>>                 ),
>>         }
>>  };
>>
>> With this, you should see 1107Mhz as the GPU Fmax.
> 
> I see your dt entry takes care of bins 0..=4.. this oversight worries
> me a bit - are these values above (post change) all in sync with what
> you entered into DT?

Yes. DT is accurate. And with this additional change both the driver and
DT will be consistent.

-Akhil.

> 
> I'm not saying they necessarily aren't, but I want to avoid
> inconsistencies
> 
> Konrad
>