[PATCH] dmaengine: Add NULL check in lpc18xx_dmamux_reserve()

[Eugen Hristev]

On 6/16/25 09:02, Charles Han wrote:
> The function of_find_device_by_node() may return NULL if the device
> node is not found or CONFIG_OF not defined.
> Add  check whether the return value is NULL and set the error code
> to be returned as -ENODEV.
> 
> Fixes: e5f4ae84be74 ("dmaengine: add driver for lpc18xx dmamux")
> Signed-off-by: Charles Han <hanchunchao at inspur.com>
> ---
>  drivers/dma/lpc18xx-dmamux.c | 9 +++++++--
>  1 file changed, 7 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/dma/lpc18xx-dmamux.c b/drivers/dma/lpc18xx-dmamux.c
> index 2b6436f4b193..ef9aed4ba173 100644
> --- a/drivers/dma/lpc18xx-dmamux.c
> +++ b/drivers/dma/lpc18xx-dmamux.c
> @@ -53,11 +53,16 @@ static void lpc18xx_dmamux_free(struct device *dev, void *route_data)
>  static void *lpc18xx_dmamux_reserve(struct of_phandle_args *dma_spec,
>  				    struct of_dma *ofdma)
>  {
> -	struct platform_device *pdev = of_find_device_by_node(ofdma->of_node);
> -	struct lpc18xx_dmamux_data *dmamux = platform_get_drvdata(pdev);
>  	unsigned long flags;
>  	unsigned mux;
>  
> +	struct platform_device *pdev = of_find_device_by_node(ofdma->of_node);
> +
> +	if (!pdev)
> +		return ERR_PTR(-ENODEV);
> +
> +	struct lpc18xx_dmamux_data *dmamux = platform_get_drvdata(pdev);

I believe you should still declare all the variables at the beginning of
the function, even if you initialize them later.

> +
>  	if (dma_spec->args_count != 3) {
>  		dev_err(&pdev->dev, "invalid number of dma mux args\n");
>  		return ERR_PTR(-EINVAL);