[PATCH v3 2/6] PCI: rockchip-host: Use macro PCIE_RESET_CONFIG_WAIT_MS

[Niklas Cassel]

Macro PCIE_RESET_CONFIG_WAIT_MS was added to pci.h in commit d5ceb9496c56
("PCI: Add PCIE_RESET_CONFIG_DEVICE_WAIT_MS waiting time value").

Later, in commit 70a7bfb1e515 ("PCI: rockchip-host: Wait 100ms after reset
before starting configuration"), PCIE_T_RRS_READY_MS was added to pci.h.

These macros are duplicates, and represent the exact same delay in the
PCIe specification.

Since the comment above PCIE_RESET_CONFIG_WAIT_MS is strictly more correct
than the comment above PCIE_T_RRS_READY_MS, change rockchip-host to use
PCIE_RESET_CONFIG_WAIT_MS, and remove PCIE_T_RRS_READY_MS, as
rockchip-host is the only user of this macro.

Reviewed-by: Wilfred Mallawa <wilfred.mallawa at wdc.com>
Signed-off-by: Niklas Cassel <cassel at kernel.org>
---
 drivers/pci/controller/pcie-rockchip-host.c | 2 +-
 drivers/pci/pci.h                           | 7 -------
 2 files changed, 1 insertion(+), 8 deletions(-)

diff --git a/drivers/pci/controller/pcie-rockchip-host.c b/drivers/pci/controller/pcie-rockchip-host.c
index b9e7a8710cf0..c11ed45c25f6 100644
--- a/drivers/pci/controller/pcie-rockchip-host.c
+++ b/drivers/pci/controller/pcie-rockchip-host.c
@@ -325,7 +325,7 @@ static int rockchip_pcie_host_init_port(struct rockchip_pcie *rockchip)
 	msleep(PCIE_T_PVPERL_MS);
 	gpiod_set_value_cansleep(rockchip->perst_gpio, 1);
 
-	msleep(PCIE_T_RRS_READY_MS);
+	msleep(PCIE_RESET_CONFIG_WAIT_MS);
 
 	/* 500ms timeout value should be enough for Gen1/2 training */
 	err = readl_poll_timeout(rockchip->apb_base + PCIE_CLIENT_BASIC_STATUS1,
diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h
index 98d6fccb383e..819833e57590 100644
--- a/drivers/pci/pci.h
+++ b/drivers/pci/pci.h
@@ -35,13 +35,6 @@ struct pcie_tlp_log;
  */
 #define PCIE_T_PERST_CLK_US		100
 
-/*
- * End of conventional reset (PERST# de-asserted) to first configuration
- * request (device able to respond with a "Request Retry Status" completion),
- * from PCIe r6.0, sec 6.6.1.
- */
-#define PCIE_T_RRS_READY_MS	100
-
 /*
  * PCIe r6.0, sec 5.3.3.2.1 <PME Synchronization>
  * Recommends 1ms to 10ms timeout to check L2 ready.
-- 
2.49.0