[PATCH] ARM: dts: microchip: gardena-smart-gateway: Fix power LED

[Ezra Buehler]

From: Ezra Buehler <ezra.buehler at husqvarnagroup.com>

When starting up, the GARDENA smart Gateway's power LED should be
flashing green. It is unclear why this has not been done earlier.

The LED frequency cannot be configured in the devicetree. Luckily, the
default is 1 Hz, which is what we want.

Signed-off-by: Ezra Buehler <ezra.buehler at husqvarnagroup.com>
---
 .../boot/dts/microchip/at91sam9g25-gardena-smart-gateway.dts    | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/microchip/at91sam9g25-gardena-smart-gateway.dts b/arch/arm/boot/dts/microchip/at91sam9g25-gardena-smart-gateway.dts
index e0c1e8df81b1..947c011c1b00 100644
--- a/arch/arm/boot/dts/microchip/at91sam9g25-gardena-smart-gateway.dts
+++ b/arch/arm/boot/dts/microchip/at91sam9g25-gardena-smart-gateway.dts
@@ -46,7 +46,7 @@ led-power-blue {
 		led-power-green {
 			label = "smartgw:power:green";
 			gpios = <&pioC 20 GPIO_ACTIVE_HIGH>;
-			default-state = "on";
+			linux,default-trigger = "timer";
 		};
 
 		led-power-red {
-- 
2.43.0