[PATCH v2 3/5] arm64: dts: ti: k3-j7200: disable "mcu_cpsw" in SoC file and enable in board file

[Siddharth Vadapalli]

Following the existing convention of disabling nodes in the SoC file and
enabling only the required ones in the board file, disable "mcu_cpsw" node
in the SoC file "k3-j7200-mcu-wakeup.dtsi" and enable it in the board file
"k3-j7200-common-proc-board.dts".

Signed-off-by: Siddharth Vadapalli <s-vadapalli at ti.com>
---

v1 of this patch was 2 different patches which have currently been
squashed:
 https://lore.kernel.org/r/20250529133443.1252293-9-s-vadapalli@ti.com/
 https://lore.kernel.org/r/20250529133443.1252293-10-s-vadapalli@ti.com/

Squashing the patches is the only change since the v1 series, in
addition to updating the commit message accordingly.

Regards,
Siddharth.

 arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts | 1 +
 arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi       | 2 ++
 2 files changed, 3 insertions(+)

diff --git a/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts b/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts
index f684ce6ad9ad..021cdeb84ad1 100644
--- a/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts
+++ b/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts
@@ -321,6 +321,7 @@ &wkup_gpio0 {
 };
 
 &mcu_cpsw {
+	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&mcu_cpsw_pins_default>, <&mcu_mdio_pins_default>;
 };
diff --git a/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi
index 56ab144fea07..604295092d06 100644
--- a/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi
@@ -432,6 +432,8 @@ mcu_cpsw: ethernet at 46000000 {
 			    "tx4", "tx5", "tx6", "tx7",
 			    "rx";
 
+		status = "disabled";
+
 		ethernet-ports {
 			#address-cells = <1>;
 			#size-cells = <0>;
-- 
2.34.1