[PATCH v3 13/13] arm64: dts: mediatek: mt7988a-bpi-r4: configure switch phys and leds

[AngeloGioacchino Del Regno]

Il 08/06/25 23:14, Frank Wunderlich ha scritto:
> From: Frank Wunderlich <frank-w at public-files.de>
> 
> Assign pinctrl to switch phys and leds.
> 
> Signed-off-by: Daniel Golle <daniel at makrotopia.org>
> Signed-off-by: Frank Wunderlich <frank-w at public-files.de>
> ---
> v2:
> - add labels and led-function and include after dropping from soc dtsi
> ---
>   .../dts/mediatek/mt7988a-bananapi-bpi-r4.dtsi | 61 +++++++++++++++++++
>   1 file changed, 61 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4.dtsi b/arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4.dtsi
> index d8b9cd794ee3..f10d3617dcac 100644
> --- a/arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4.dtsi
> +++ b/arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4.dtsi
> @@ -4,6 +4,7 @@
>   
>   #include <dt-bindings/gpio/gpio.h>
>   #include <dt-bindings/regulator/richtek,rt5190a-regulator.h>
> +#include <dt-bindings/leds/common.h>
>   
>   #include "mt7988a.dtsi"
>   
> @@ -151,6 +152,66 @@ &gmac2 {
>   	phy-mode = "usxgmii";
>   };
>   
> +&gsw_phy0 {
> +	pinctrl-names = "gbe-led";
> +	pinctrl-0 = <&gbe0_led0_pins>;

pinctrl-0
pinctrl-names (here and everywhere else)

> +};
> +
> +&gsw_phy0_led0 {

function
color
status

> +	status = "okay";
> +	function = LED_FUNCTION_WAN;
> +	color = <LED_COLOR_ID_GREEN>;
> +};
> +
> +&gsw_port0 {
> +	label = "wan";
> +};
> +
> +&gsw_phy1 {
> +	pinctrl-names = "gbe-led";
> +	pinctrl-0 = <&gbe1_led0_pins>;
> +};
> +
> +&gsw_phy1_led0 {
> +	status = "okay";
> +	function = LED_FUNCTION_LAN;
> +	color = <LED_COLOR_ID_GREEN>;
> +};
> +
> +&gsw_port1 {
> +	label = "lan1";
> +};
> +
> +&gsw_phy2 {
> +	pinctrl-names = "gbe-led";
> +	pinctrl-0 = <&gbe2_led0_pins>;
> +};
> +
> +&gsw_phy2_led0 {
> +	status = "okay";
> +	function = LED_FUNCTION_LAN;
> +	color = <LED_COLOR_ID_GREEN>;
> +};
> +
> +&gsw_port2 {
> +	label = "lan2";
> +};
> +
> +&gsw_phy3 {

function

pinctrl-0
pinctrl-names


> +	pinctrl-names = "gbe-led";
> +	function = LED_FUNCTION_LAN;
> +	pinctrl-0 = <&gbe3_led0_pins>;
> +};
> +
> +&gsw_phy3_led0 {

color
status

> +	status = "okay";
> +	color = <LED_COLOR_ID_GREEN>;
> +};

...after which

Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno at collabora.com>