[PATCH v3 07/13] arm64: dts: mediatek: mt7988: add switch node

[AngeloGioacchino Del Regno]

Il 08/06/25 23:14, Frank Wunderlich ha scritto:
> From: Frank Wunderlich <frank-w at public-files.de>
> 
> Add mt7988 builtin mt753x switch nodes.
> 
> Signed-off-by: Daniel Golle <daniel at makrotopia.org>
> Signed-off-by: Frank Wunderlich <frank-w at public-files.de>
> ---
> v2:
> - drop labels and led-function too (have to be in board)
> ---
>   arch/arm64/boot/dts/mediatek/mt7988a.dtsi | 153 ++++++++++++++++++++++
>   1 file changed, 153 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/mediatek/mt7988a.dtsi b/arch/arm64/boot/dts/mediatek/mt7988a.dtsi
> index ee1e01d720fe..0b35a32b9c89 100644
> --- a/arch/arm64/boot/dts/mediatek/mt7988a.dtsi
> +++ b/arch/arm64/boot/dts/mediatek/mt7988a.dtsi
> @@ -742,6 +742,159 @@ ethsys: clock-controller at 15000000 {
>   			#reset-cells = <1>;
>   		};
>   
> +		switch: switch at 15020000 {
> +			compatible = "mediatek,mt7988-switch";
> +			reg = <0 0x15020000 0 0x8000>;
> +			interrupt-controller;
> +			#interrupt-cells = <1>;
> +			interrupt-parent = <&gic>;

You don't need interrupt-parent, it's already GIC here... :-)

> +			interrupts = <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>;
> +			resets = <&ethwarp MT7988_ETHWARP_RST_SWITCH>;
> +
> +			ports {
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +
> +				gsw_port0: port at 0 {
> +					reg = <0>;

Keep it ordered alphabetically - phy-handle (h) before phy-mode (m)

> +					phy-mode = "internal";
> +					phy-handle = <&gsw_phy0>;
> +				};
> +
> +				gsw_port1: port at 1 {
> +					reg = <1>;
> +					phy-mode = "internal";
> +					phy-handle = <&gsw_phy1>;
> +				};
> +
> +				gsw_port2: port at 2 {
> +					reg = <2>;
> +					phy-mode = "internal";
> +					phy-handle = <&gsw_phy2>;
> +				};
> +
> +				gsw_port3: port at 3 {
> +					reg = <3>;
> +					phy-mode = "internal";
> +					phy-handle = <&gsw_phy3>;
> +				};
> +
> +				port at 6 {
> +					reg = <6>;
> +					ethernet = <&gmac0>;
> +					phy-mode = "internal";
> +
> +					fixed-link {
> +						speed = <10000>;
> +						full-duplex;
> +						pause;
> +					};
> +				};
> +			};
> +
> +			mdio {
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +				mediatek,pio = <&pio>;
> +
> +				gsw_phy0: ethernet-phy at 0 {
> +					compatible = "ethernet-phy-ieee802.3-c22";
> +					reg = <0>;
> +					interrupts = <0>;
> +					phy-mode = "internal";
> +					nvmem-cells = <&phy_calibration_p0>;
> +					nvmem-cell-names = "phy-cal-data";

phy-mode (p) after nvmem-cell-names (n) please (here and everywhere else)

> +
> +					leds {
> +						#address-cells = <1>;
> +						#size-cells = <0>;
> +
> +						gsw_phy0_led0: led at 0 {
> +							reg = <0>;
> +							status = "disabled";
> +						};
> +
> +						gsw_phy0_led1: led at 1 {
> +							reg = <1>;
> +							status = "disabled";
> +						};
> +					};
> +				};
> +
> +				gsw_phy1: ethernet-phy at 1 {
> +					compatible = "ethernet-phy-ieee802.3-c22";
> +					reg = <1>;
> +					interrupts = <1>;
> +					phy-mode = "internal";
> +					nvmem-cells = <&phy_calibration_p1>;
> +					nvmem-cell-names = "phy-cal-data";
> +
> +					leds {
> +						#address-cells = <1>;
> +						#size-cells = <0>;
> +
> +						gsw_phy1_led0: led at 0 {
> +							reg = <0>;
> +							status = "disabled";
> +						};
> +
> +						gsw_phy1_led1: led at 1 {
> +							reg = <1>;
> +							status = "disabled";
> +						};
> +					};
> +				};
> +
> +				gsw_phy2: ethernet-phy at 2 {
> +					compatible = "ethernet-phy-ieee802.3-c22";
> +					reg = <2>;
> +					interrupts = <2>;
> +					phy-mode = "internal";
> +					nvmem-cells = <&phy_calibration_p2>;
> +					nvmem-cell-names = "phy-cal-data";
> +
> +					leds {
> +						#address-cells = <1>;
> +						#size-cells = <0>;
> +
> +						gsw_phy2_led0: led at 0 {
> +							reg = <0>;
> +							status = "disabled";
> +						};
> +
> +						gsw_phy2_led1: led at 1 {
> +							reg = <1>;
> +							status = "disabled";
> +						};
> +					};
> +				};
> +
> +				gsw_phy3: ethernet-phy at 3 {
> +					compatible = "ethernet-phy-ieee802.3-c22";
> +					reg = <3>;
> +					interrupts = <3>;
> +					phy-mode = "internal";
> +					nvmem-cells = <&phy_calibration_p3>;
> +					nvmem-cell-names = "phy-cal-data";
> +
> +					leds {
> +						#address-cells = <1>;
> +						#size-cells = <0>;
> +
> +						gsw_phy3_led0: led at 0 {
> +							reg = <0>;
> +							status = "disabled";
> +						};
> +
> +						gsw_phy3_led1: led at 1 {
> +							reg = <1>;
> +							status = "disabled";
> +						};
> +					};
> +				};
> +			};
> +		};
> +
>   		ethwarp: clock-controller at 15031000 {
>   			compatible = "mediatek,mt7988-ethwarp";
>   			reg = <0 0x15031000 0 0x1000>;