[PATCH v6 6/7] arm64: dts: rockchip: Add thermal nodes to RK3576

Nicolas Frattaroli nicolas.frattaroli at collabora.com
Tue Jun 10 05:32:42 PDT 2025


Add the TSADC node to the RK3576. Additionally, add everything the TSADC
needs to function, i.e. thermal zones, their trip points and maps, as
well as adjust the CPU cooling-cells property.

The polling-delay properties are set to 0 as we do have interrupts for
this TSADC on this particular SoC, though the polling-delay-passive
properties are set to 100 for the thermal zones that have a passive
cooling device, as otherwise the thermal throttling behaviour never
unthrottles.

Signed-off-by: Nicolas Frattaroli <nicolas.frattaroli at collabora.com>
---
 arch/arm64/boot/dts/rockchip/rk3576.dtsi | 164 ++++++++++++++++++++++++++++++-
 1 file changed, 162 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/rockchip/rk3576.dtsi b/arch/arm64/boot/dts/rockchip/rk3576.dtsi
index 1086482f04792325dc4c22fb8ceeb27eef59afe4..dbc527ec60cfac0bbdb881a27d3ff765366be99e 100644
--- a/arch/arm64/boot/dts/rockchip/rk3576.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3576.dtsi
@@ -11,6 +11,7 @@
 #include <dt-bindings/power/rockchip,rk3576-power.h>
 #include <dt-bindings/reset/rockchip,rk3576-cru.h>
 #include <dt-bindings/soc/rockchip,boot-mode.h>
+#include <dt-bindings/thermal/thermal.h>
 
 / {
 	compatible = "rockchip,rk3576";
@@ -113,9 +114,9 @@ cpu_l0: cpu at 0 {
 			capacity-dmips-mhz = <485>;
 			clocks = <&scmi_clk SCMI_ARMCLK_L>;
 			operating-points-v2 = <&cluster0_opp_table>;
-			#cooling-cells = <2>;
 			dynamic-power-coefficient = <120>;
 			cpu-idle-states = <&CPU_SLEEP>;
+			#cooling-cells = <2>;
 		};
 
 		cpu_l1: cpu at 1 {
@@ -127,6 +128,7 @@ cpu_l1: cpu at 1 {
 			clocks = <&scmi_clk SCMI_ARMCLK_L>;
 			operating-points-v2 = <&cluster0_opp_table>;
 			cpu-idle-states = <&CPU_SLEEP>;
+			#cooling-cells = <2>;
 		};
 
 		cpu_l2: cpu at 2 {
@@ -138,6 +140,7 @@ cpu_l2: cpu at 2 {
 			clocks = <&scmi_clk SCMI_ARMCLK_L>;
 			operating-points-v2 = <&cluster0_opp_table>;
 			cpu-idle-states = <&CPU_SLEEP>;
+			#cooling-cells = <2>;
 		};
 
 		cpu_l3: cpu at 3 {
@@ -149,6 +152,7 @@ cpu_l3: cpu at 3 {
 			clocks = <&scmi_clk SCMI_ARMCLK_L>;
 			operating-points-v2 = <&cluster0_opp_table>;
 			cpu-idle-states = <&CPU_SLEEP>;
+			#cooling-cells = <2>;
 		};
 
 		cpu_b0: cpu at 100 {
@@ -159,9 +163,9 @@ cpu_b0: cpu at 100 {
 			capacity-dmips-mhz = <1024>;
 			clocks = <&scmi_clk SCMI_ARMCLK_B>;
 			operating-points-v2 = <&cluster1_opp_table>;
-			#cooling-cells = <2>;
 			dynamic-power-coefficient = <320>;
 			cpu-idle-states = <&CPU_SLEEP>;
+			#cooling-cells = <2>;
 		};
 
 		cpu_b1: cpu at 101 {
@@ -173,6 +177,7 @@ cpu_b1: cpu at 101 {
 			clocks = <&scmi_clk SCMI_ARMCLK_B>;
 			operating-points-v2 = <&cluster1_opp_table>;
 			cpu-idle-states = <&CPU_SLEEP>;
+			#cooling-cells = <2>;
 		};
 
 		cpu_b2: cpu at 102 {
@@ -184,6 +189,7 @@ cpu_b2: cpu at 102 {
 			clocks = <&scmi_clk SCMI_ARMCLK_B>;
 			operating-points-v2 = <&cluster1_opp_table>;
 			cpu-idle-states = <&CPU_SLEEP>;
+			#cooling-cells = <2>;
 		};
 
 		cpu_b3: cpu at 103 {
@@ -195,6 +201,7 @@ cpu_b3: cpu at 103 {
 			clocks = <&scmi_clk SCMI_ARMCLK_B>;
 			operating-points-v2 = <&cluster1_opp_table>;
 			cpu-idle-states = <&CPU_SLEEP>;
+			#cooling-cells = <2>;
 		};
 
 		idle-states {
@@ -520,6 +527,143 @@ psci {
 		method = "smc";
 	};
 
+	thermal_zones: thermal-zones {
+		/* sensor near the center of the SoC */
+		package_thermal: package-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsadc 0>;
+
+			trips {
+				package_crit: package-crit {
+					temperature = <115000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		/* sensor for cluster1 (big Cortex-A72 cores) */
+		bigcore_thermal: bigcore-thermal {
+			polling-delay-passive = <100>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsadc 1>;
+
+			trips {
+				bigcore_alert: bigcore-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				bigcore_crit: bigcore-crit {
+					temperature = <115000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&bigcore_alert>;
+					cooling-device =
+						<&cpu_b0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&cpu_b1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&cpu_b2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&cpu_b3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		/* sensor for cluster0 (little Cortex-A53 cores) */
+		littlecore_thermal: littlecore-thermal {
+			polling-delay-passive = <100>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsadc 2>;
+
+			trips {
+				littlecore_alert: littlecore-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				littlecore_crit: littlecore-crit {
+					temperature = <115000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&littlecore_alert>;
+					cooling-device =
+						<&cpu_l0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&cpu_l1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&cpu_l2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&cpu_l3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		gpu_thermal: gpu-thermal {
+			polling-delay-passive = <100>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsadc 3>;
+
+			trips {
+				gpu_alert: gpu-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				gpu_crit: gpu-crit {
+					temperature = <115000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&gpu_alert>;
+					cooling-device =
+						<&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		npu_thermal: npu-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsadc 4>;
+
+			trips {
+				npu_crit: npu-crit {
+					temperature = <115000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		ddr_thermal: ddr-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsadc 5>;
+
+			trips {
+				ddr_crit: ddr-crit {
+					temperature = <115000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+	};
+
 	timer {
 		compatible = "arm,armv8-timer";
 		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
@@ -2285,6 +2429,22 @@ saradc: adc at 2ae00000 {
 			status = "disabled";
 		};
 
+		tsadc: tsadc at 2ae70000 {
+			compatible = "rockchip,rk3576-tsadc";
+			reg = <0x0 0x2ae70000 0x0 0x400>;
+			interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cru CLK_TSADC>, <&cru PCLK_TSADC>;
+			clock-names = "tsadc", "apb_pclk";
+			assigned-clocks = <&cru CLK_TSADC>;
+			assigned-clock-rates = <2000000>;
+			resets = <&cru SRST_P_TSADC>, <&cru SRST_TSADC>;
+			reset-names = "tsadc-apb", "tsadc";
+			#thermal-sensor-cells = <1>;
+			rockchip,hw-tshut-temp = <120000>;
+			rockchip,hw-tshut-mode = <0>; /* tshut mode 0:CRU 1:GPIO */
+			rockchip,hw-tshut-polarity = <0>; /* tshut polarity 0:LOW 1:HIGH */
+		};
+
 		i2c9: i2c at 2ae80000 {
 			compatible = "rockchip,rk3576-i2c", "rockchip,rk3399-i2c";
 			reg = <0x0 0x2ae80000 0x0 0x1000>;

-- 
2.49.0




More information about the linux-arm-kernel mailing list