[PATCH 2/2] arm64: dts: rockchip: add overlay for RockPro64 screen

[Krzysztof Kozlowski]

On 18/05/2025 23:59, Peter Robinson wrote:
> The Pine64 touch panel is a panel consisting of the Feiyang fy07024di26a30d
> panel with a Goodix gt911 touch screen. Add a device tree overlay to
> allow the display to be easily used on the device.
> 
> This was previously included in the main device tree but left disabled
> by default which still required rebuilding the DT to use the device, now
> overlays can go upstream the overlay is the best way to handle the
> add on devices.
> 
> Signed-off-by: Peter Robinson <pbrobinson at gmail.com>
> ---
>  arch/arm64/boot/dts/rockchip/Makefile         |  9 ++
>  .../dts/rockchip/rk3399-rockpro64-screen.dtso | 89 +++++++++++++++++++
>  2 files changed, 98 insertions(+)
>  create mode 100644 arch/arm64/boot/dts/rockchip/rk3399-rockpro64-screen.dtso
> 
> diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile
> index 3e8771ef69ba1..c7b13bff3ac20 100644
> --- a/arch/arm64/boot/dts/rockchip/Makefile
> +++ b/arch/arm64/boot/dts/rockchip/Makefile
> @@ -77,6 +77,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rock-pi-4c.dtb
>  dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rock960.dtb
>  dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rockpro64-v2.dtb
>  dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rockpro64.dtb
> +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rockpro64-screen.dtso


This was absolutely never built as reported by Naresh. You should never
sent patches which are at least built tested... although they should be
actually tested as well, but if code does not build actual testing is
impossible.

Best regards,
Krzysztof