[PATCH v1 2/2] ARM: dts: aspeed: santabarbara: Add Meta Santabarbara BMC
Fred Chen
fredchen.openbmc at gmail.com
Fri Jun 6 03:27:54 PDT 2025
Add linux device tree entry related to the Meta(Facebook) computer-node
system use an AT2600 BMC.
This node is named "Santabarbara".
Signed-off-by: Fred Chen <fredchen.openbmc at gmail.com>
---
arch/arm/boot/dts/aspeed/Makefile | 1 +
.../aspeed-bmc-facebook-santabarbara.dts | 978 ++++++++++++++++++
2 files changed, 979 insertions(+)
create mode 100644 arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-santabarbara.dts
diff --git a/arch/arm/boot/dts/aspeed/Makefile b/arch/arm/boot/dts/aspeed/Makefile
index 2e5f4833a073..6a8fb3addf0f 100644
--- a/arch/arm/boot/dts/aspeed/Makefile
+++ b/arch/arm/boot/dts/aspeed/Makefile
@@ -27,6 +27,7 @@ dtb-$(CONFIG_ARCH_ASPEED) += \
aspeed-bmc-facebook-harma.dtb \
aspeed-bmc-facebook-minerva.dtb \
aspeed-bmc-facebook-minipack.dtb \
+ aspeed-bmc-facebook-santabarbara.dtb \
aspeed-bmc-facebook-tiogapass.dtb \
aspeed-bmc-facebook-wedge40.dtb \
aspeed-bmc-facebook-wedge100.dtb \
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-santabarbara.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-santabarbara.dts
new file mode 100644
index 000000000000..139b986bbfbf
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-santabarbara.dts
@@ -0,0 +1,978 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+// Copyright 2025 Facebook Inc.
+
+/dts-v1/;
+#include "aspeed-g6.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/i2c/i2c.h>
+
+/ {
+ model = "Facebook Santabarbara BMC";
+ compatible = "facebook,santabarbara-bmc", "aspeed,ast2600";
+
+ aliases {
+ serial0 = &uart1;
+ serial2 = &uart3;
+ serial3 = &uart4;
+ serial4 = &uart5;
+ i2c16 = &i2c4mux0ch0;
+ i2c17 = &i2c4mux0ch1;
+ i2c18 = &i2c4mux0ch2;
+ i2c19 = &i2c4mux0ch3;
+ i2c20 = &i2c4mux0ch4;
+ i2c21 = &i2c4mux0ch5;
+ i2c22 = &i2c4mux0ch6;
+ i2c23 = &i2c4mux0ch7;
+ i2c24 = &i2c5mux0ch0;
+ i2c25 = &i2c5mux0ch1;
+ i2c26 = &i2c5mux0ch2;
+ i2c27 = &i2c5mux0ch3;
+ i2c28 = &i2c5mux1ch0;
+ i2c29 = &i2c5mux1ch1;
+ i2c30 = &i2c5mux1ch2;
+ i2c31 = &i2c5mux1ch3;
+ i2c32 = &i2c12mux0ch0;
+ i2c33 = &i2c12mux0ch1;
+ i2c34 = &i2c12mux0ch2;
+ i2c35 = &i2c12mux0ch3;
+ i2c36 = &i2c12mux0ch4;
+ i2c37 = &i2c12mux0ch5;
+ i2c38 = &i2c12mux0ch6;
+ i2c39 = &i2c12mux0ch7;
+ };
+
+ chosen {
+ stdout-path = "serial4:57600n8";
+ };
+
+ memory at 80000000 {
+ device_type = "memory";
+ reg = <0x80000000 0x80000000>;
+ };
+
+ iio-hwmon {
+ compatible = "iio-hwmon";
+ io-channels = <&adc0 0>, <&adc0 1>, <&adc0 2>, <&adc0 3>,
+ <&adc0 4>, <&adc0 5>, <&adc0 6>, <&adc0 7>,
+ <&adc1 2>;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led-0 {
+ label = "bmc_heartbeat_amber";
+ gpios = <&gpio0 ASPEED_GPIO(P, 7) GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "heartbeat";
+ };
+
+ led-1 {
+ label = "fp_id_amber";
+ default-state = "off";
+ gpios = <&gpio0 ASPEED_GPIO(B, 5) GPIO_ACTIVE_HIGH>;
+ };
+
+ led-2 {
+ label = "power_blue";
+ default-state = "off";
+ gpios = <&gpio0 ASPEED_GPIO(P, 4) GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ spi_gpio: spi {
+ status = "okay";
+ compatible = "spi-gpio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ sck-gpios = <&gpio0 ASPEED_GPIO(Z, 3) GPIO_ACTIVE_HIGH>;
+ mosi-gpios = <&gpio0 ASPEED_GPIO(Z, 4) GPIO_ACTIVE_HIGH>;
+ miso-gpios = <&gpio0 ASPEED_GPIO(Z, 5) GPIO_ACTIVE_HIGH>;
+ num-chipselects = <1>;
+ cs-gpios = <&gpio0 ASPEED_GPIO(Z, 0) GPIO_ACTIVE_LOW>;
+
+ tpm at 0 {
+ compatible = "infineon,slb9670", "tcg,tpm_tis-spi";
+ spi-max-frequency = <33000000>;
+ reg = <0>;
+ };
+ };
+
+ p3v3_bmc_aux: regulator-p3v3-bmc-aux {
+ compatible = "regulator-fixed";
+ regulator-name = "p3v3_bmc_aux";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+};
+
+// HOST BIOS Debug
+&uart1 {
+ status = "okay";
+};
+
+&uart3 {
+ status = "okay";
+};
+
+&uart4 {
+ status = "okay";
+};
+
+// BMC Debug Console
+&uart5 {
+ status = "okay";
+};
+
+&uart_routing {
+ status = "okay";
+};
+
+&wdt1 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_wdtrst1_default>;
+ aspeed,reset-type = "soc";
+ aspeed,external-signal;
+ aspeed,ext-push-pull;
+ aspeed,ext-active-high;
+ aspeed,ext-pulse-duration = <256>;
+};
+
+&mac2 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_rmii3_default>;
+ use-ncsi;
+};
+
+&fmc {
+ status = "okay";
+
+ flash at 0 {
+ status = "okay";
+ m25p,fast-read;
+ label = "bmc";
+ spi-max-frequency = <50000000>;
+#include "openbmc-flash-layout-128.dtsi"
+ };
+
+ flash at 1 {
+ status = "okay";
+ m25p,fast-read;
+ label = "alt-bmc";
+ spi-max-frequency = <50000000>;
+ };
+};
+
+// BIOS Flash
+&spi2 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_spi2_default>;
+
+ flash at 0 {
+ status = "okay";
+ m25p,fast-read;
+ label = "pnor";
+ spi-max-frequency = <12000000>;
+ spi-tx-bus-width = <2>;
+ spi-rx-bus-width = <2>;
+ };
+};
+
+&kcs2 {
+ status = "okay";
+ aspeed,lpc-io-reg = <0xca8>;
+};
+
+&kcs3 {
+ status = "okay";
+ aspeed,lpc-io-reg = <0xca2>;
+};
+
+&i2c0 {
+ status = "okay";
+
+ // MB FRU
+ eeprom at 53 {
+ compatible = "atmel,24c128";
+ reg = <0x53>;
+ };
+
+ rtc at 68 {
+ compatible = "dallas,ds1339";
+ reg = <0x68>;
+ };
+};
+
+&i2c1 {
+ status = "okay";
+
+ fan-controller at 21{
+ compatible = "maxim,max31790";
+ reg = <0x21>;
+ };
+
+ gpio at 20 {
+ compatible = "nxp,pca9555";
+ reg = <0x20>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-parent = <&sgpiom0>;
+ interrupts = <112 IRQ_TYPE_LEVEL_LOW>;
+ gpio-line-names =
+ "FM_NIC_PPS_IN_OE_N","FM_NIC_PPS_OUT_OE_N",
+ "FM_CPU0_TRIGGERTSC_OE_N","FM_NIC_PPS_IN_MUX_OE_N",
+ "FM_CPU0_CORETYPE0","FM_CPU0_CORETYPE1",
+ "FM_CPU0_CORETYPE2","FM_NIC_PPS_OUT_MUX_OE",
+ "CLKMUX_INPUT_LOSS_U45_R_N","FM_CPU0_SP7R1",
+ "FM_CPU0_SP7R2","FM_CPU0_SP7R3",
+ "FM_CPU0_SP7R4","",
+ "FM_NIC_PPS_IN_S0_R","FM_NIC_PPS_IN_S1_R";
+ };
+
+ gpio at 22 {
+ compatible = "nxp,pca9555";
+ reg = <0x22>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-parent = <&sgpiom0>;
+ interrupts = <116 IRQ_TYPE_LEVEL_LOW>;
+ gpio-line-names =
+ "FM_CBL_PRSNT_0A_N","FM_CBL_PRSNT_0B_N",
+ "FM_CBL_PRSNT_1A_N","FM_CBL_PRSNT_1B_N",
+ "FM_MODULE_PWRGD_0A","FM_MODULE_PWRGD_0B",
+ "CLKMUX_INPUT_LOSS_U88_R_N","FM_MODULE_PWRGD_1B",
+ "","",
+ "CLKMUX_INPUT_LOSS_U83_R_N","CLKMUX_INPUT_LOSS_U84_R_N",
+ "FM_P3V3_E1S_0_FAULT_R_N","FM_P3V3_E1S_1_FAULT_R_N",
+ "E1S_0_P12V_ADC_R_ALERT","E1S_1_P12V_ADC_R_ALERT";
+ };
+
+ gpio at 24 {
+ compatible = "nxp,pca9555";
+ reg = <0x24>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-parent = <&sgpiom0>;
+ interrupts = <114 IRQ_TYPE_LEVEL_LOW>;
+ gpio-line-names =
+ "FM_CBL_PRSNT_2A_N","FM_CBL_PRSNT_2B_N",
+ "FM_CBL_PRSNT_3A_N","FM_CBL_PRSNT_3B_N",
+ "FM_CBL_PRSNT_4A_N","FM_CBL_PRSNT_4B_N",
+ "FM_P3V3_NIC_400G_FAULT_R_N","FM_MODULE_PWRGD_2B",
+ "OCP_SFF_P12V_ADC_R_ALERT","FM_MODULE_PWRGD_3B",
+ "FM_THERMAL_ALERT_R_N","FM_MODULE_PWRGD_4B",
+ "FM_CBL_PRSNT_OSFP_A_N","FM_CBL_PRSNT_OSFP_B_N",
+ "FM_JTAG_MCIO_MUX_S0","FM_JTAG_MCIO_MUX_S1";
+ };
+
+ gpio at 26 {
+ compatible = "nxp,pca9555";
+ reg = <0x26>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-parent = <&sgpiom0>;
+ interrupts = <118 IRQ_TYPE_LEVEL_LOW>;
+ gpio-line-names =
+ "FAN_0_PRSNT_R1_N","FAN_1_PRSNT_R1_N",
+ "FAN_2_PRSNT_R1_N","FAN_3_PRSNT_R1_N",
+ "P12V_FAN_0_ADC_ALERT","P12V_FAN_1_ADC_ALERT",
+ "P12V_FAN_2_ADC_ALERT","P12V_FAN_3_ADC_ALERT",
+ "P12V_FAN0_PWRGD_R","P12V_FAN1_PWRGD_R",
+ "P12V_FAN2_PWRGD_R","P12V_FAN3_PWRGD_R",
+ "","","","";
+ };
+};
+
+&i2c4 {
+ status = "okay";
+
+ i2c-mux at 70 {
+ compatible = "nxp,pca9548";
+ reg = <0x70>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ i2c-mux-idle-disconnect;
+
+ i2c4mux0ch0: i2c at 0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+
+ // HPM Board ID EEPROM
+ eeprom at 51 {
+ compatible = "atmel,24c128";
+ reg = <0x51>;
+ };
+
+ // SCM Board ID EEPROM
+ eeprom at 53 {
+ compatible = "atmel,24c128";
+ reg = <0x53>;
+ };
+ };
+ i2c4mux0ch1: i2c at 1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ };
+ i2c4mux0ch2: i2c at 2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ };
+ i2c4mux0ch3: i2c at 3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+
+ power-monitor at 40 {
+ compatible = "ti,ina230";
+ reg = <0x40>;
+ shunt-resistor = <2000>;
+ };
+
+ power-monitor at 42 {
+ compatible = "ti,ina230";
+ reg = <0x42>;
+ shunt-resistor = <2000>;
+ };
+
+ power-monitor at 44 {
+ compatible = "ti,ina230";
+ reg = <0x44>;
+ shunt-resistor = <2000>;
+ };
+
+ power-monitor at 46 {
+ compatible = "ti,ina230";
+ reg = <0x46>;
+ shunt-resistor = <2000>;
+ };
+
+ temperature-sensor at 4c {
+ compatible = "ti,tmp75";
+ reg = <0x4c>;
+ };
+
+ temperature-sensor at 4e {
+ compatible = "ti,tmp75";
+ reg = <0x4e>;
+ };
+
+ voltage-sensor at 48 {
+ compatible = "ti,ads7830";
+ reg = <0x48>;
+ vref-supply = <&p3v3_bmc_aux>;
+ };
+
+ voltage-sensor at 4a {
+ compatible = "ti,ads7830";
+ reg = <0x4a>;
+ vref-supply = <&p3v3_bmc_aux>;
+ };
+ };
+ i2c4mux0ch4: i2c at 4 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <4>;
+ };
+ i2c4mux0ch5: i2c at 5 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <5>;
+ };
+ i2c4mux0ch6: i2c at 6 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <6>;
+
+ power-monitor at 40 {
+ compatible = "ti,ina230";
+ reg = <0x40>;
+ shunt-resistor = <2000>;
+ };
+
+ power-monitor at 42 {
+ compatible = "ti,ina230";
+ reg = <0x42>;
+ shunt-resistor = <2000>;
+ };
+
+ power-monitor at 44 {
+ compatible = "ti,ina230";
+ reg = <0x44>;
+ shunt-resistor = <2000>;
+ };
+
+ power-monitor at 46 {
+ compatible = "ti,ina230";
+ reg = <0x46>;
+ shunt-resistor = <2000>;
+ };
+
+ voltage-sensor at 48 {
+ compatible = "ti,ads7830";
+ reg = <0x48>;
+ };
+ };
+ i2c4mux0ch7: i2c at 7 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <7>;
+
+ // FIO FRU
+ eeprom at 53 {
+ compatible = "atmel,24c512";
+ reg = <0x53>;
+ };
+
+ temperature-sensor at 4b {
+ compatible = "ti,tmp75";
+ reg = <0x4b>;
+ };
+
+ temperature-sensor at 4f {
+ compatible = "ti,tmp75";
+ reg = <0x4f>;
+ };
+ };
+ };
+};
+
+&i2c5 {
+ status = "okay";
+
+ // E1S BP FRU
+ eeprom at 52 {
+ compatible = "atmel,24c64";
+ reg = <0x52>;
+ };
+
+ i2c-mux at 71 {
+ compatible = "nxp,pca9546";
+ reg = <0x71>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ i2c-mux-idle-disconnect;
+
+ i2c5mux0ch0: i2c at 0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ };
+ i2c5mux0ch1: i2c at 1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ };
+ i2c5mux0ch2: i2c at 2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ };
+ i2c5mux0ch3: i2c at 3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ };
+ };
+
+ i2c-mux at 72 {
+ compatible = "nxp,pca9546";
+ reg = <0x72>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ i2c-mux-idle-disconnect;
+
+ i2c5mux1ch0: i2c at 0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+
+ voltage-sensor at 48 {
+ compatible = "ti,ads7830";
+ reg = <0x48>;
+ };
+ };
+ i2c5mux1ch1: i2c at 1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+
+ temperature-sensor at 48 {
+ compatible = "ti,tmp75";
+ reg = <0x48>;
+ };
+ };
+ i2c5mux1ch2: i2c at 2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+
+ power-monitor at 40 {
+ compatible = "ti,ina230";
+ reg = <0x40>;
+ shunt-resistor = <2000>;
+ };
+
+ power-monitor at 41 {
+ compatible = "ti,ina230";
+ reg = <0x41>;
+ shunt-resistor = <2000>;
+ };
+
+ power-monitor at 44 {
+ compatible = "ti,ina230";
+ reg = <0x44>;
+ shunt-resistor = <2000>;
+ };
+
+ power-monitor at 45 {
+ compatible = "ti,ina230";
+ reg = <0x45>;
+ shunt-resistor = <2000>;
+ };
+ };
+ i2c5mux1ch3: i2c at 3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+
+ gpio at 74 {
+ compatible = "nxp,pca9539";
+ reg = <0x74>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-line-names =
+ "P12V_E1S_ADC_ALERT","BUFF0_100M_LOSB_PLD",
+ "E1S_BP_SKU_ID0","E1S_BP_SKU_ID1",
+ "E1S_BP_SKU_ID2","E1S_BP_REV_ID0",
+ "E1S_BP_REV_ID1","E1S_BP_REV_ID2",
+ "P3V3_E1S_1_FAULT_R_N","P3V3_E1S_2_FAULT_R_N",
+ "P3V3_E1S_3_FAULT_R_N","P3V3_E1S_4_FAULT_R_N",
+ "P12V_E1S_1_FAULT_R_N","P12V_E1S_2_FAULT_R_N",
+ "P12V_E1S_3_FAULT_R_N","P12V_E1S_4_FAULT_R_N";
+ };
+ };
+ };
+};
+
+&i2c6 {
+ status = "okay";
+
+ // Rainbow0 FRU
+ eeprom at 52 {
+ compatible = "atmel,24c256";
+ reg = <0x52>;
+ };
+};
+
+&i2c7 {
+ status = "okay";
+};
+
+&i2c8 {
+ status = "okay";
+
+ // Rainbow2 FRU
+ eeprom at 52 {
+ compatible = "atmel,24c256";
+ reg = <0x52>;
+ };
+};
+
+&i2c9 {
+ status = "okay";
+
+ // SCM FRU
+ eeprom at 50 {
+ compatible = "atmel,24c128";
+ reg = <0x50>;
+ };
+
+ // BSM FRU
+ eeprom at 56 {
+ compatible = "atmel,24c64";
+ reg = <0x56>;
+ };
+
+ temperature-sensor at 4b {
+ compatible = "ti,tmp75";
+ reg = <0x4b>;
+ };
+};
+
+&i2c10 {
+ status = "okay";
+
+ // Rainbow3 FRU
+ eeprom at 52 {
+ compatible = "atmel,24c256";
+ reg = <0x52>;
+ };
+};
+
+&i2c11 {
+ status = "okay";
+
+ // OCP NIC TEMP
+ temperature-sensor at 1f {
+ compatible = "ti,tmp421";
+ reg = <0x1f>;
+ };
+
+ // OCP NIC FRU
+ eeprom at 50 {
+ compatible = "atmel,24c64";
+ reg = <0x50>;
+ };
+};
+
+&i2c12 {
+ status = "okay";
+
+ // SWB FRU
+ eeprom at 52 {
+ compatible = "atmel,24c64";
+ reg = <0x52>;
+ };
+
+ i2c-mux at 72 {
+ compatible = "nxp,pca9548";
+ reg = <0x72>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ i2c-mux-idle-disconnect;
+
+ i2c12mux0ch0: i2c at 0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+
+ temperature-sensor at 48 {
+ compatible = "ti,tmp75";
+ reg = <0x48>;
+ };
+ };
+ i2c12mux0ch1: i2c at 1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+
+ power-monitor at 42 {
+ compatible = "mps,mp2971";
+ reg = <0x42>;
+ };
+
+ power-monitor at 43 {
+ compatible = "mps,mp2971";
+ reg = <0x43>;
+ };
+ };
+ i2c12mux0ch2: i2c at 2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+
+ power-monitor at 40 {
+ compatible = "ti,ina230";
+ reg = <0x40>;
+ shunt-resistor = <2000>;
+ };
+
+ power-monitor at 41 {
+ compatible = "ti,ina230";
+ reg = <0x41>;
+ shunt-resistor = <2000>;
+ };
+ };
+ i2c12mux0ch3: i2c at 3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+
+ power-monitor at 44 {
+ compatible = "ti,ina230";
+ reg = <0x44>;
+ shunt-resistor = <2000>;
+ };
+
+ power-monitor at 45 {
+ compatible = "ti,ina230";
+ reg = <0x45>;
+ shunt-resistor = <2000>;
+ };
+ };
+ i2c12mux0ch4: i2c at 4 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <4>;
+
+ voltage-sensor at 49 {
+ compatible = "ti,ads7830";
+ reg = <0x49>;
+ };
+ };
+ i2c12mux0ch5: i2c at 5 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <5>;
+ };
+ i2c12mux0ch6: i2c at 6 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <6>;
+ };
+ i2c12mux0ch7: i2c at 7 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <7>;
+ };
+ };
+};
+
+&i2c13 {
+ status = "okay";
+
+ // Rainbow1 FRU
+ eeprom at 52 {
+ compatible = "atmel,24c256";
+ reg = <0x52>;
+ };
+};
+
+&i2c14 {
+ status = "okay";
+};
+
+&i2c15 {
+ status = "okay";
+};
+
+&adc0 {
+ aspeed,int-vref-microvolt = <2500000>;
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_adc0_default &pinctrl_adc1_default
+ &pinctrl_adc2_default &pinctrl_adc3_default
+ &pinctrl_adc4_default &pinctrl_adc5_default
+ &pinctrl_adc6_default &pinctrl_adc7_default>;
+};
+
+&adc1 {
+ aspeed,int-vref-microvolt = <2500000>;
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_adc10_default>;
+};
+
+&ehci0 {
+ status = "okay";
+};
+
+&ehci1 {
+ status = "okay";
+};
+
+&gpio0 {
+ pinctrl-names = "default";
+ gpio-line-names =
+ /*A0-A7*/ "","","","","","","","",
+ /*B0-B7*/ "rtc-battery-voltage-read-enable","","","BMC_READY",
+ "","led-identify","","",
+ /*C0-C7*/ "","","","","","","","",
+ /*D0-D7*/ "","","","","","","","",
+ /*E0-E7*/ "","","","","","","","",
+ /*F0-F7*/ "","","","","","","","",
+ /*G0-G7*/ "","","","","","","","",
+ /*H0-H7*/ "","","","","","","","",
+ /*I0-I7*/ "","","","","","","","",
+ /*J0-J7*/ "","","","","","","","",
+ /*K0-K7*/ "","","","","","","","",
+ /*L0-L7*/ "","","","","","","","",
+ /*M0-M7*/ "","","","","","","","",
+ /*N0-N7*/ "led-postcode-0","led-postcode-1",
+ "led-postcode-2","led-postcode-3",
+ "led-postcode-4","led-postcode-5",
+ "led-postcode-6","led-postcode-7",
+ /*O0-O7*/ "","","","","","","","",
+ /*P0-P7*/ "power-button","","reset-button","",
+ "led-power","","","",
+ /*Q0-Q7*/ "","","","","","","","",
+ /*R0-R7*/ "","","","","","","","",
+ /*S0-S7*/ "","","power-host-control","","","","","",
+ /*T0-T7*/ "","","","","","","","",
+ /*U0-U7*/ "","","","","","","","",
+ /*V0-V7*/ "","","","","","","","",
+ /*W0-W7*/ "","","","","","","","",
+ /*X0-X7*/ "","","","","","","","",
+ /*Y0-Y7*/ "","","","","","","","",
+ /*Z0-Z7*/ "","","","","","","","";
+};
+
+&gpio1 {
+ gpio-line-names =
+ /*18A0-18A7*/ "","","","","","","","",
+ /*18B0-18B7*/ "","","","",
+ "FM_BOARD_BMC_REV_ID0","FM_BOARD_BMC_REV_ID1",
+ "FM_BOARD_BMC_REV_ID2","",
+ /*18C0-18C7*/ "SPI_BMC_BIOS_ROM_IRQ0_R_N","","","","","","","",
+ /*18D0-18D7*/ "","","","","","","","",
+ /*18E0-18E3*/ "FM_BMC_PROT_LS_EN","AC_PWR_BMC_BTN_R_N","","";
+};
+
+&sgpiom0 {
+ status = "okay";
+ ngpios = <128>;
+ bus-frequency = <2000000>;
+ gpio-line-names =
+ /*in - out - in - out */
+ /*A0-A3 line 0-7*/
+ "PDB1_HSC_PWR_OK","power-chassis-control",
+ "PDB2_HSC_PWR_OK","FM_MODULE_PWRGD_0A_OUT",
+ "PWRGD_P12V_MEM","FM_MODULE_PWRGD_0B_OUT",
+ "PWRGD_P12V_SCM","FM_MODULE_PWRGD_1B_OUT",
+ /*A4-A7 line 8-15*/
+ "PWRGD_P12V_FAN","FM_MODULE_PWRGD_2B_OUT",
+ "PWRGD_P5V_AUX","FM_MODULE_PWRGD_3B_OUT",
+ "power-chassis-good","FM_MODULE_PWRGD_4B_OUT",
+ "PWRGD_P1V8_LDO","FM_CBL_PRSNT_0A_N_OUT",
+ /*B0-B3 line 16-23*/
+ "PWRGD_P1V_LDO","FM_CBL_PRSNT_0B_N_OUT",
+ "PWRGD_PVDD33_S5","FM_CBL_PRSNT_1A_N_OUT",
+ "PWRGD_PVDD18_S5_P0","FM_CBL_PRSNT_1B_N_OUT",
+ "CPU0_SLP_S5_N","FM_CBL_PRSNT_2A_N_OUT",
+ /*B4-B7 line 24-31*/
+ "PWRGD_PVDDIO_MEM_S3_P0","FM_CBL_PRSNT_2B_N_OUT",
+ "CPU0_SLP_S3_N","FM_CBL_PRSNT_3A_N_OUT",
+ "FM_MODULE_PWRGD_1B","FM_CBL_PRSNT_3B_N_OUT",
+ "FM_MODULE_PWRGD_2B","FM_CBL_PRSNT_4A_N_OUT",
+ /*C0-C3 line 32-39*/
+ "FM_MODULE_PWRGD_3B","FM_CBL_PRSNT_4B_N_OUT",
+ "FM_MODULE_PWRGD_4B","P12V_FAN0_PWRGD_OUT",
+ "FM_MODULE_PWRGD_0B","P12V_FAN1_PWRGD_OUT",
+ "PWRGD_PVDDIO_P0","P12V_FAN2_PWRGD_OUT",
+ /*C4-C7 line 40-47*/
+ "PWRGD_PVDDCR_SOC_P0","P12V_FAN3_PWRGD_OUT",
+ "PWRGD_PVDDCR_CPU0_P0","P12V_FAN4_PWRGD_OUT",
+ "PWRGD_PVDDCR_CPU1_P0","P12V_FAN5_PWRGD_OUT",
+ "FM_CPU0_PWR_GOOD","P12V_FAN6_PWRGD_OUT",
+ /*D0-D3 line 48-55*/
+ "host0-ready","P12V_FAN7_PWRGD_OUT",
+ "FM_PWRGD_CPU0_PWROK","FAN_0_PRSNT_R1_N_OUT",
+ "FM_RST_CPU0_RESETL_N","FAN_1_PRSNT_R1_N_OUT",
+ "RST_CPU0_PERST0_R_N","FAN_2_PRSNT_R1_N_OUT",
+ /*D4-D7 line 56-63*/
+ "RST_CPU0_PERST1_R_N","FAN_3_PRSNT_R1_N_OUT",
+ "BIOS_POST_CMPLT","FAN_4_PRSNT_R1_N_OUT",
+ "","FAN_5_PRSNT_R1_N_OUT",
+ "","FAN_6_PRSNT_R1_N_OUT",
+ /*E0-E3 line 64-71*/
+ "FM_PWRGD_CHAD_CPU0","FAN_7_PRSNT_R1_N_OUT",
+ "FM_PWRGD_CHEH_CPU0","TRAY_SLOT_ID0_OUT",
+ "FM_PWRGD_CHIL_CPU0","TRAY_SLOT_ID1_OUT",
+ "FM_PWRGD_CHMP_CPU0","TRAY_SLOT_ID2_OUT",
+ /*E4-E7 line 72-79*/
+ "P12V_E1S_0_PWRGD","TRAY_SLOT_ID3_OUT",
+ "P12V_E1S_1_PWRGD","TRAY_SLOT_ID4_OUT",
+ "P3V3_E1S_0_PWRGD","SCM_JTAG_MUX_S0_R",
+ "P3V3_E1S_1_PWRGD","SCM_JTAG_MUX_S1_R",
+ /*F0-F3 line 80-87*/
+ "FM_MODULE_PWRGD_0A","BMC_SGPIO_READY",
+ "OCP_V3_1_P3V3_PLD_R_PWRGD","CPU0_SYS_RESET_N",
+ "P12V_OCP_V3_1_PLD_PWRGD","RST_CPU0_KBRST_N",
+ "PWRGD_OCP_SFF_PWR_GOOD","BIOS_DEBUG_MODE",
+ /*F4-F7 line 88-95*/
+ "","CLR_CMOS",
+ "","I3C_SPD_MUX_FORCE_SEL",
+ "","FM_JTAG_HOST_SEL",
+ "","TRAY_PRESENT_N",
+ /*G0-G3 line 96-103*/
+ "MB_REV_ID_0","UART_BMC_SEL0",
+ "MB_REV_ID_1","UART_BMC_SEL1",
+ "MB_REV_ID_2","SCM_USB_SEL",
+ "MB_SKU_ID_0","FORCE_ALL_PWRON",
+ /*G4-G7 line 104-111*/
+ "MB_SKU_ID_1","PASSWORD_CLEAR",
+ "MB_SKU_ID_2","",
+ "MB_SKU_ID_3","",
+ "","BIOS_DEBUG_MODE",
+ /*H0-H3 line 112-119*/
+ "FM_IOEXP_U538_INT_N","",
+ "FM_IOEXP_U539_INT_N","",
+ "FM_IOEXP_U540_INT_N","",
+ "FM_IOEXP_U541_INT_N","",
+ /*H4-H7 line 120-127*/
+ "FM_IOEXP_PDB2_U1003_INT_N","",
+ "","","","","","",
+ /*I0-I3 line 128-135*/
+ "","","","",
+ "PDB_IRQ_PMBUS_ALERT_ISO_R_N","",
+ "PDB_UV_ALERT_ISO_R_N","",
+ /*I4-I7 line 136-143*/
+ "P12V_SCM_ADC_ALERT","",
+ "CPU0_REGS_I2C_ALERT_N","",
+ "FM_RTC_ALERT_N","",
+ "APML_CPU0_ALERT_R_N","",
+ /*J0-J3 line 144-151*/
+ "SMB_RJ45_FIO_TMP_ALERT","",
+ "FM_SMB_ALERT_MCIO_0A_N","",
+ "I3C_MCIO_0B_ALERT_ISO_R_N","",
+ "FM_SMB_ALERT_MCIO_1A_N","",
+ /*J4-J7 line 152-159*/
+ "I3C_MCIO_1B_ALERT_ISO_R_N","",
+ "FM_SMB_ALERT_MCIO_2A_N","",
+ "I3C_MCIO_2B_ALERT_ISO_R_N","",
+ "FM_SMB_ALERT_MCIO_3A_N","",
+ /*K0-K3 line 160-167*/
+ "I3C_MCIO_3B_ALERT_ISO_R_N","",
+ "FM_SMB_ALERT_MCIO_4A_N","",
+ "I3C_MCIO_4B_ALERT_ISO_R_N","",
+ "","",
+ /*K4-K7 line 168-175*/
+ "","","","","","","","",
+ /*L0-L3 line 176-183*/
+ "FM_CPU0_THERMTRIP_N","",
+ "FM_CPU0_PROCHOT_N","",
+ "FM_CPU0_SMERR_N","",
+ "FM_PVDDCR_CPU0_P0_OCP_N","",
+ /*L4-L7 line 184-191*/
+ "FM_PVDDCR_CPU1_P0_OCP_N","",
+ "FM_PVDDCR_SOC_P0_OCP_N","",
+ "FM_OCP_PWRBRK_R_N","",
+ "PMIC_ERROR_N","",
+ /*M0-M3 line 192-199*/
+ "","","","","","","","",
+ /*M4-M7 line 200-207*/
+ "","","","","","","","",
+ /*N0-N3 line 208-215*/
+ "FM_PRSNT_CPU0_N","",
+ "OCP_SFF_PRSNT_N","",
+ "E1S_0_PRSNT_R_N","",
+ "E1S_BP_0_PRSNT_R_N","",
+ /*N4-N7 line 216-223*/
+ "E1S_BP_1_PRSNT_R_N","",
+ "E1S_BP_2_PRSNT_R_N","",
+ "E1S_BP_3_PRSNT_R_N","",
+ "PDB_PRSNT_J311_N","",
+ /*O0-O3 line 224-231*/
+ "PDB_PRSNT_J312_N","",
+ "PDB_PRSNT_J313_N","",
+ "PDB_PRSNT_J314_N","",
+ "PRSNT_RJ45_FIO_N_R","",
+ /*O4-O7 line 232-239*/
+ "PRSNT_LEAK_CABLE_1_R_N","",
+ "PRSNT_LEAK_CABLE_2_R_N","",
+ "PRSNT_HDT_N","",
+ "","",
+ /*P0-P3 line 240-247*/
+ "","","","","","","","",
+ /*P4-P7 line 248-255*/
+ "","","","","","","","";
+};
--
2.49.0
More information about the linux-arm-kernel
mailing list