[net-next v12 1/7] dt-bindings: net: Add MTIP L2 switch description

[Rob Herring (Arm)]

On Thu, 22 May 2025 09:54:49 +0200, Lukasz Majewski wrote:
> This patch provides description of the MTIP L2 switch available in some
> NXP's SOCs - e.g. imx287.
> 
> Signed-off-by: Lukasz Majewski <lukma at denx.de>
> Reviewed-by: Stefan Wahren <wahrenst at gmx.net>
> 
> ---
> Changes for v2:
> - Rename the file to match exactly the compatible
>   (nxp,imx287-mtip-switch)
> 
> Changes for v3:
> - Remove '-' from const:'nxp,imx287-mtip-switch'
> - Use '^port@[12]+$' for port patternProperties
> - Drop status = "okay";
> - Provide proper indentation for 'example' binding (replace 8
>   spaces with 4 spaces)
> - Remove smsc,disable-energy-detect; property
> - Remove interrupt-parent and interrupts properties as not required
> - Remove #address-cells and #size-cells from required properties check
> - remove description from reg:
> - Add $ref: ethernet-switch.yaml#
> 
> Changes for v4:
> - Use $ref: ethernet-switch.yaml#/$defs/ethernet-ports and remove already
>   referenced properties
> - Rename file to nxp,imx28-mtip-switch.yaml
> 
> Changes for v5:
> - Provide proper description for 'ethernet-port' node
> 
> Changes for v6:
> - Proper usage of
>   $ref: ethernet-switch.yaml#/$defs/ethernet-ports/patternProperties
>   when specifying the 'ethernet-ports' property
> - Add description and check for interrupt-names property
> 
> Changes for v7:
> - Change switch interrupt name from 'mtipl2sw' to 'enet_switch'
> 
> Changes for v8:
> - None
> 
> Changes for v9:
> - Add GPIO_ACTIVE_LOW to reset-gpios mdio phandle
> 
> Changes for v10:
> - None
> 
> Changes for v11:
> - None
> 
> Changes for v12:
> - Remove 'label' from required properties
> - Move the reference to $ref: ethernet-switch.yaml#/$defs/ethernet-ports
>   the proper place (under 'allOf:')
> ---
>  .../bindings/net/nxp,imx28-mtip-switch.yaml   | 150 ++++++++++++++++++
>  1 file changed, 150 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/net/nxp,imx28-mtip-switch.yaml
> 

Reviewed-by: Rob Herring (Arm) <robh at kernel.org>