[PATCH v2 0/2] Add TechNexion EDM-G-IMX8M-PLUS SOM and WB-EDM-G carrier board support

[Richard Hu]

Add initial support for TechNexion EDM-G-IMX8M-PLUS SOM and WB-EDM-G 
carrier board.

Change in V2:
- Ensured accurate `To:` and `Cc:` addresses by utilizing 
  `b4 prep --auto-to-cc`. (Thanks to Krzysztof Kozlowski for the 
  tip on this command and helpful suggestion from Rob Herring)

in patch 1/2:
        - Add Acked-by tag

in patch 2/2: 
        - Generic Node Naming: Refactored device tree node names for I2C 
          GPIO expanders, the USB Type-C controller, and the PMIC to adhere
          to generic naming conventions (e.g., `gpio at 21`, `usb-typec at 67`, 
          `pmic at 25`).
        
        - Removed Unused SPI Node: Eliminated the `spidev1` node due to an 
          incorrect and non-existent compatible string (`rohm,dh2228fv`).

        - Minor formatting improvements (e.g., whitespace, indentation).

Signed-off-by: Richard Hu <richard.hu at technexion.com>
---
Ray Chang (1):
      dt-bindings: arm: fsl: Add EDM-G-IMX8M-PLUS SOM and WB-EDM-G carrier board

Richard Hu (1):
      arm64: dts: imx8mp: Add TechNexion EDM-G-IMX8M-PLUS SOM on WB-EDM-G carrier board

 Documentation/devicetree/bindings/arm/fsl.yaml    |   7 +
 arch/arm64/boot/dts/freescale/Makefile            |   1 +
 arch/arm64/boot/dts/freescale/imx8mp-edm-g-wb.dts | 403 +++++++++++
 arch/arm64/boot/dts/freescale/imx8mp-edm-g.dtsi   | 839 ++++++++++++++++++++++
 4 files changed, 1250 insertions(+)
---
base-commit: 0ff41df1cb268fc69e703a08a57ee14ae967d0ca
change-id: 20250604-add-technexion-edm-g-imx8m-plus-som-79adf0b397eb

Best regards,
-- 
Richard Hu <richard.hu at technexion.com>