[v2] arm64: dts: freescale: imx93-var-som: update eqos support for MaxLinear PHY

[Andrew Lunn]

>  &eqos {
>  	pinctrl-names = "default";
>  	pinctrl-0 = <&pinctrl_eqos>;
> +	/*
> +	 * The required RGMII TX and RX 2ns delays are implemented directly
> +	 * in hardware via passive delay elements on the SOM PCB.
> +	 * No delay configuration is needed in software via PHY driver.
> +	 */
>  	phy-mode = "rgmii";

For this part only:

Reviewed-by: Andrew Lunn <andrew at lunn.ch>

    Andrew