[PATCH v2 1/1] ARM: dts: aspeed: Add device tree for Nvidia's GB200 UT3.0b platform BMC

[Krzysztof Kozlowski]

On 04/06/2025 04:50, Donald Shannon wrote:
> The GB200NVL UT3.0b BMC is an Aspeed Ast2600 based BMC
> for Nvidia Blackwell GB200NVL platform.
> Reference to Ast2600 SOC [1].
> Reference to Blackwell GB200NVL Platform [2].
> 
> Link: https://www.aspeedtech.com/server_ast2600/ [1]
> Link: https://nvdam.widen.net/s/wwnsxrhm2w/blackwell-datasheet-3384703 [2]
> 
> Signed-off-by: Donald Shannon <donalds at nvidia.com>
> ---
>  arch/arm/boot/dts/aspeed/Makefile             |    1 +
>  .../aspeed/aspeed-bmc-nvidia-gb200-ut30b.dts  | 1172 +++++++++++++++++
>  2 files changed, 1173 insertions(+)
>  create mode 100644 arch/arm/boot/dts/aspeed/aspeed-bmc-nvidia-gb200-ut30b.dts
> 
> diff --git a/arch/arm/boot/dts/aspeed/Makefile b/arch/arm/boot/dts/aspeed/Makefile
> index b3170fdd3096..1101bc74e8c8 100644
> --- a/arch/arm/boot/dts/aspeed/Makefile
> +++ b/arch/arm/boot/dts/aspeed/Makefile
> @@ -51,6 +51,7 @@ dtb-$(CONFIG_ARCH_ASPEED) += \
>  	aspeed-bmc-lenovo-hr855xg2.dtb \
>  	aspeed-bmc-microsoft-olympus.dtb \
>  	aspeed-bmc-nvidia-gb200nvl-bmc.dtb \
> +	aspeed-bmc-nvidia-gb200-ut30b.dtb \
>  	aspeed-bmc-opp-lanyang.dtb \
>  	aspeed-bmc-opp-mowgli.dtb \
>  	aspeed-bmc-opp-nicole.dtb \
> diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-nvidia-gb200-ut30b.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-nvidia-gb200-ut30b.dts
> new file mode 100644
> index 000000000000..52cbc591c577
> --- /dev/null
> +++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-nvidia-gb200-ut30b.dts
> @@ -0,0 +1,1172 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/dts-v1/;
> +
> +#include "aspeed-g6.dtsi"
> +#include <dt-bindings/i2c/i2c.h>
> +#include <dt-bindings/gpio/aspeed-gpio.h>
> +#include <dt-bindings/leds/common.h>
> +
> +/ {
> +	model = "AST2600 GB200 UT3.0b BMC";
> +	compatible = "nvidia,gb200nvl-bmc", "aspeed,ast2600";

Missing bindings.

Please run scripts/checkpatch.pl on the patches and fix reported
warnings. After that, run also 'scripts/checkpatch.pl --strict' on the
patches and (probably) fix more warnings. Some warnings can be ignored,
especially from --strict run, but the code here looks like it needs a
fix. Feel free to get in touch if the warning is not clear.



...

> +
> +    fixedregulator_standby_power: fixedregulator_standby_power {

Follow DTS about naming. Also, that's really poor name in general.
Please use name for all fixed regulators which matches current format
recommendation: 'regulator-[0-9]v[0-9]'

https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/Documentation/devicetree/bindings/regulator/fixed-regulator.yaml?h=v6.11-rc1#n46

> +		status = "okay";

Where was it disabled?

Why order of properties is completely opposite to DTS coding style?

> +		compatible = "regulator-fixed";
> +		regulator-name = "standby_power";
> +		gpio = <&gpio0 ASPEED_GPIO(M, 3) GPIO_ACTIVE_HIGH>;
> +		regulator-min-microvolt = <1800000>;
> +		regulator-max-microvolt = <1800000>;
> +		//startup-delay-us = <5000000>;

Hm?

> +		enable-active-high;
> +		regulator-always-on;
> +	};
> +};
> +
> +// Enable Primary flash on FMC for bring up activity
> +&fmc {
> +	status = "okay";
> +	flash at 0 {
> +		status = "okay";

Read DTS coding style.

This code has also indentation issues in multiple places.

Best regards,
Krzysztof