[v3 PATCH 2/2] arch: arm64: dts: add big-endian property back into watchdog node

[Frank Li]

On Tue, Jun 03, 2025 at 12:02:30PM +0800, Meng Li wrote:
> When verifying watchdog feature on NXP ls1046ardb board,
> it doesn't work. Because in commit 7c8ffc5555cb("arm64: dts: layerscape:

Watchdog doesn't work on NXP ls1046ardb board because ...

please wrap at 75 chas.
> remove big-endian for mmc nodes"), it intented to remove the big-endian
> from mmc node, but the big-endian of watchdog node is also removed by
> accident. So, add watchdog big-endian property back.

extra empty line here.

> In addition, fsl,ls1046a-wdt allows big-endian property, so add it into
> compatible property.

In addition, add compatible string fsl,ls1046a-wdt, which allow big-endian
property.

>
> Fixes: 7c8ffc5555cb ("arm64: dts: layerscape: remove big-endian for mmc nodes")
> Cc: stable at vger.kernel.org
> Signed-off-by: Meng Li <Meng.Li at windriver.com>

after above small fix

Reviewed-by: Frank Li <Frank.Li at nxp.com>

> ---
>  arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi | 3 ++-
>  1 file changed, 2 insertions(+), 1 deletion(-)
>
> diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
> index 0baf256b4400..983b2f0e8797 100644
> --- a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
> +++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
> @@ -687,11 +687,12 @@ lpuart5: serial at 29a0000 {
>  		};
>
>  		wdog0: watchdog at 2ad0000 {
> -			compatible = "fsl,imx21-wdt";
> +			compatible = "fsl,ls1046a-wdt", "fsl,imx21-wdt";
>  			reg = <0x0 0x2ad0000 0x0 0x10000>;
>  			interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
>  			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
>  					    QORIQ_CLK_PLL_DIV(2)>;
> +			big-endian;
>  		};
>
>  		edma0: dma-controller at 2c00000 {
> --
> 2.34.1
>