[PATCH v2 1/1] dt-bindings: mmc: mxs-mmc: change ref to mmc-controller-common.yaml from mmc-controller.yaml

[Rob Herring (Arm)]

On Mon, 02 Jun 2025 11:01:47 -0400, Frank Li wrote:
> Change ref to mmc-controller-common.yaml from mmc-controller.yaml because
> imx23/imx28 use dual mode controller (spi and mmc). So default dts node
> name use spi instead of mmc. The legacy reason, it use difference
> compatible string to distringuish work mode (spi / mmc).
> 
> Fix below CHECK_DTB warnings:
> arch/arm/boot/dts/nxp/mxs/imx23-olinuxino.dtb: spi at 80010000 (fsl,imx23-mmc): $nodename:0: 'spi at 80010000' does not match '^mmc(@.*)?$'
> 
> Additional add clocks property.
> 
> Signed-off-by: Frank Li <Frank.Li at nxp.com>
> ---
> change in v2
> - add clocks to required
> - fix typo legancy in commit message
> ---
>  Documentation/devicetree/bindings/mmc/mxs-mmc.yaml | 6 +++++-
>  1 file changed, 5 insertions(+), 1 deletion(-)
> 

My bot found errors running 'make dt_binding_check' on your patch:

yamllint warnings/errors:

dtschema/dtc warnings/errors:
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/mmc/mxs-mmc.example.dtb: mmc at 80010000 (fsl,imx28-mmc): 'clocks' is a required property
	from schema $id: http://devicetree.org/schemas/mmc/mxs-mmc.yaml#

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20250602150147.947883-1-Frank.Li@nxp.com

The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.