[PATCH v6 02/10] drm/bridge: synopsys: Add DW DPTX Controller support library

Dmitry Baryshkov dmitry.baryshkov at oss.qualcomm.com
Mon Jul 28 05:05:14 PDT 2025


On Mon, Jul 28, 2025 at 04:28:27PM +0800, Andy Yan wrote:
> From: Andy Yan <andy.yan at rock-chips.com>
> 
> The DW DP TX Controller is compliant with the DisplayPort Specification
> Version 1.4 with the following features:
> 
> * DisplayPort 1.4a
> * Main Link: 1/2/4 lanes
> * Main Link Support 1.62Gbps, 2.7Gbps, 5.4Gbps and 8.1Gbps
> * AUX channel 1Mbps
> * Single Stream Transport(SST)
> * Multistream Transport (MST)
> * Type-C support (alternate mode)
> * HDCP 2.2, HDCP 1.3
> * Supports up to 8/10 bits per color component
> * Supports RBG, YCbCr4:4:4, YCbCr4:2:2, YCbCr4:2:0
> * Pixel clock up to 594MHz
> * I2S, SPDIF audio interface
> 
> Add library with common helpers to make it can be shared with
> other SoC.
> 
> Signed-off-by: Andy Yan <andy.yan at rock-chips.com>
> 
> ---
> 
> Changes in v6:
> - Use drm_dp_vsc_sdp_supported
> - Store bpc/bpp/color format in dw_dp_bridge_state
> 
> Changes in v5:
> - Use drm_dp_read_sink_count_cap instead of the private implementation.
> 
> Changes in v4:
> - Drop unnecessary header files
> - Switch to devm_drm_bridge_alloc
> 
> Changes in v3:
> - Rebase on drm-misc-next
> - Switch to common helpers to power up/down dp link
> - Only pass parameters to phy that should be set
> 
> Changes in v2:
> - Fix compile error when build as module
> - Add phy init
> - Only use one dw_dp_link_train_set
> - inline dw_dp_phy_update_vs_emph
> - Use dp_sdp
> - Check return value of drm_modeset_lock
> - Merge code in atomic_pre_enable/mode_fixup to atomic_check
> - Return NULL if can't find a supported output format
> - Fix max_link_rate from plat_data
> 
>  drivers/gpu/drm/bridge/synopsys/Kconfig  |    7 +
>  drivers/gpu/drm/bridge/synopsys/Makefile |    1 +
>  drivers/gpu/drm/bridge/synopsys/dw-dp.c  | 2094 ++++++++++++++++++++++
>  include/drm/bridge/dw_dp.h               |   20 +
>  4 files changed, 2122 insertions(+)
>  create mode 100644 drivers/gpu/drm/bridge/synopsys/dw-dp.c
>  create mode 100644 include/drm/bridge/dw_dp.h
> 

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov at oss.qualcomm.com>


-- 
With best wishes
Dmitry



More information about the linux-arm-kernel mailing list