[PATCH 01/12] dt-bindings: display: st: add new compatible to LTDC device

[Raphael Gallais-Pou]

On 7/25/25 21:49, Rob Herring wrote:
> On Fri, Jul 25, 2025 at 12:03:53PM +0200, Raphael Gallais-Pou wrote:
>> The new STMicroelectronics SoC features a display controller similar to
>> the one used in previous SoCs.  Because there is additional registers,
>> it is incompatible with existing IPs.
>>
>> Add the new name to the list of compatible string.
>>
>> Signed-off-by: Raphael Gallais-Pou <raphael.gallais-pou at foss.st.com>
>> ---
>>  .../devicetree/bindings/display/st,stm32-ltdc.yaml | 37 +++++++++++++++++++---
>>  1 file changed, 33 insertions(+), 4 deletions(-)
>>
>> diff --git a/Documentation/devicetree/bindings/display/st,stm32-ltdc.yaml b/Documentation/devicetree/bindings/display/st,stm32-ltdc.yaml
>> index d6ea4d62a2cfae26353c9f20a326a4329fed3a2f..546f57cb7a402b82e868aa05f874c65b8da19444 100644
>> --- a/Documentation/devicetree/bindings/display/st,stm32-ltdc.yaml
>> +++ b/Documentation/devicetree/bindings/display/st,stm32-ltdc.yaml
>> @@ -12,7 +12,9 @@ maintainers:
>>  
>>  properties:
>>    compatible:
>> -    const: st,stm32-ltdc
>> +    enum:
>> +      - st,stm32-ltdc
>> +      - st,stm32mp25-ltdc
>>  
>>    reg:
>>      maxItems: 1
>> @@ -24,11 +26,12 @@ properties:
>>      minItems: 1
>>  
>>    clocks:
>> -    maxItems: 1
>> +    minItems: 1
>> +    maxItems: 4
>>  
>>    clock-names:
>> -    items:
>> -      - const: lcd
>> +    minItems: 1
>> +    maxItems: 4
>>  
>>    resets:
>>      maxItems: 1
>> @@ -51,6 +54,32 @@ required:
>>    - resets
>>    - port
>>  
>> +if:
>> +  properties:
>> +    compatible:
>> +      contains:
>> +        enum:
>> +          - st,stm32-ltdc
>> +then:
>> +  properties:
>> +    clocks:
>> +      maxItems: 1
>> +    clock-names:
>> +      maxItems: 1
>> +      items:
>> +        - const: lcd
>> +else:
>> +  properties:
>> +    clocks:
>> +      maxItems: 4
>> +    clock-names:
>> +      maxItems: 4
>> +      items:
>> +      - const: bus
>> +      - const: lcd
> Why can't 'lcd' be 1st so you aren't changing positions? Keep the items 
> list at the top level and just use minItems/maxItems in the if/then 
> schemas.
Hi Rob,

I've set the name order to match the stm32mp255.dtsi device-tree, so that it
does not confuse anybody regarding which clock goes with.

Your comment is taken into account for the upcoming version.

Thanks,
Raphaël
>
>> +      - const: ref
>> +      - const: lvds
>> +
>>  additionalProperties: false
>>  
>>  examples:
>>
>> -- 
>> 2.25.1
>>