[PATCH v3 10/13] ARM: dts: aspeed: Add Facebook Fuji-data64 (AST2600) Board

[Tao Ren]

On Sun, Jul 27, 2025 at 05:45:51PM +0200, Andrew Lunn wrote:
> > As I'm not 100% sure where the RX clock delay is introduced, I will drop
> > mac3 entry in v4.
> 
> Many of the hyperscalers, or the supplies to the hyperscalers keep
> hitting this. The standard policy at the moment seems to be to drop
> Ethernet support. How useful is a BMC without Ethernet?
> 
> If you all got together and talked to aspeed, apply a bit of pressure,
> it should be possible to get this mess fixed pretty quickly. And then
> you could all have working Ethernet....

Hi Andrew,

I've already reached out to Ryan and Jacky from ASPEED regarding the
topic a few weeks ago. Originally I thought MAC-side clock delay was
only needed for fixed-linked (for example, in darwin dts), but looks
like it's also impacting platforms with PHY..

Anyways I will follow up with Jacky/Ryan after addressing all the
comments for this patch series.


Thanks,

Tao