[PATCH 3/3] arm64: dts: rockchip: Add Radxa E24C

[Andrew Lunn]

> +&gmac1 {
> +	clock_in_out = "output";
> +	phy-mode = "rgmii-id";
> +	phy-supply = <&avdd_rtl8367rb>;
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&rgmii_miim>, <&rgmii_tx_bus2>, <&rgmii_rx_bus2>,
> +		    <&rgmii_rgmii_clk>, <&rgmii_rgmii_bus>, <&gmac1_rstn_l>;
> +	status = "okay";
> +
> +	fixed-link {
> +		speed = <1000>;
> +		full-duplex;
> +	};

A fixed-link without an obvious reason gets me asking questions...

The schematic indicates there is a realtek 6387 switch on the other
end. rtl8365mb.c seems to support this. Is there a reason you did not
include this now?

	Andrew