[PATCH 05/10] ARM: dts: ls1021a: Add reg property to enet nodes

[Alexander Stein]

Add missing reg property to enet nodes. This fixes the dtbs_check warning:
  Warning (unit_address_vs_reg): /soc/ethernet at 2d10000:  node has a unit name, but no reg or ranges property

Signed-off-by: Alexander Stein <alexander.stein at ew.tq-group.com>
---
 arch/arm/boot/dts/nxp/ls/ls1021a.dtsi | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/arch/arm/boot/dts/nxp/ls/ls1021a.dtsi b/arch/arm/boot/dts/nxp/ls/ls1021a.dtsi
index 2c39981bb94ed..2f4c0e468952c 100644
--- a/arch/arm/boot/dts/nxp/ls/ls1021a.dtsi
+++ b/arch/arm/boot/dts/nxp/ls/ls1021a.dtsi
@@ -707,6 +707,7 @@ ptp_clock at 2d10e00 {
 
 		enet0: ethernet at 2d10000 {
 			compatible = "fsl,etsec2";
+			reg = <0x0 0x2d10000 0x0 0x5000>;
 			device_type = "network";
 			#address-cells = <2>;
 			#size-cells = <2>;
@@ -737,6 +738,7 @@ queue-group at 2d14000  {
 
 		enet1: ethernet at 2d50000 {
 			compatible = "fsl,etsec2";
+			reg = <0x0 0x2d50000 0x0 0x5000>;
 			device_type = "network";
 			#address-cells = <2>;
 			#size-cells = <2>;
@@ -766,6 +768,7 @@ queue-group at 2d54000  {
 
 		enet2: ethernet at 2d90000 {
 			compatible = "fsl,etsec2";
+			reg = <0x0 0x2d90000 0x0 0x5000>;
 			device_type = "network";
 			#address-cells = <2>;
 			#size-cells = <2>;
-- 
2.43.0