[PATCH v2 3/4] arm64: dts: socfpga: agilex5: enable gmac2 on the Agilex5 dev kit

[Matthew Gerlach]

Enable gmac2 on the Agilex5 SOCFGPA Development Kit. The MAC is connected
to a RGMII PHY on a daughter card. There are no RGMII clock delays
implemented the on PCB.

Signed-off-by: Matthew Gerlach <matthew.gerlach at altera.com>
---
v2:
 - change phy-mode to "rgmii-id"
 - add newline before inner device tree nodes
---
 .../boot/dts/intel/socfpga_agilex5_socdk.dts  | 20 +++++++++++++++++++
 1 file changed, 20 insertions(+)

diff --git a/arch/arm64/boot/dts/intel/socfpga_agilex5_socdk.dts b/arch/arm64/boot/dts/intel/socfpga_agilex5_socdk.dts
index d3b913b7902c..e9776e1cdc9a 100644
--- a/arch/arm64/boot/dts/intel/socfpga_agilex5_socdk.dts
+++ b/arch/arm64/boot/dts/intel/socfpga_agilex5_socdk.dts
@@ -10,6 +10,9 @@ / {
 
 	aliases {
 		serial0 = &uart0;
+		ethernet0 = &gmac0;
+		ethernet1 = &gmac1;
+		ethernet2 = &gmac2;
 	};
 
 	chosen {
@@ -37,6 +40,23 @@ &gpio0 {
 	status = "okay";
 };
 
+&gmac2 {
+	status = "okay";
+	phy-mode = "rgmii-id";
+	phy-handle = <&emac2_phy0>;
+	max-frame-size = <9000>;
+
+	mdio0 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "snps,dwmac-mdio";
+
+		emac2_phy0: ethernet-phy at 0 {
+			reg = <0>;
+		};
+	};
+};
+
 &gpio1 {
 	status = "okay";
 };
-- 
2.35.3