[PATCH 4/4] dt-bindings: iio: light: Simplify interrupts property in the example

[Krzysztof Kozlowski]

dynaimage,al3010 and dynaimage,al3320a are I2C devices, so their
interrupts are not routed to GIC and rarely first interrupt cell is <0>.
This looks like copy-paste from some SoC block, so drop it and also for
readability use known defines instead of hard-coding interrupt flag.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski at linaro.org>
---
 .../devicetree/bindings/iio/light/dynaimage,al3010.yaml         | 2 +-
 .../devicetree/bindings/iio/light/dynaimage,al3320a.yaml        | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/iio/light/dynaimage,al3010.yaml b/Documentation/devicetree/bindings/iio/light/dynaimage,al3010.yaml
index f1048c30e73e..1472c997c16f 100644
--- a/Documentation/devicetree/bindings/iio/light/dynaimage,al3010.yaml
+++ b/Documentation/devicetree/bindings/iio/light/dynaimage,al3010.yaml
@@ -42,6 +42,6 @@ examples:
             compatible = "dynaimage,al3010";
             reg = <0x1c>;
             vdd-supply = <&vdd_reg>;
-            interrupts = <0 99 4>;
+            interrupts = <99 IRQ_TYPE_LEVEL_HIGH>;
         };
     };
diff --git a/Documentation/devicetree/bindings/iio/light/dynaimage,al3320a.yaml b/Documentation/devicetree/bindings/iio/light/dynaimage,al3320a.yaml
index 8249be99cff9..d06db737cd9e 100644
--- a/Documentation/devicetree/bindings/iio/light/dynaimage,al3320a.yaml
+++ b/Documentation/devicetree/bindings/iio/light/dynaimage,al3320a.yaml
@@ -40,6 +40,6 @@ examples:
             compatible = "dynaimage,al3320a";
             reg = <0x1c>;
             vdd-supply = <&vdd_reg>;
-            interrupts = <0 99 4>;
+            interrupts = <99 IRQ_TYPE_LEVEL_HIGH>;
         };
     };
-- 
2.48.1