[PATCH 3/4] dt-bindings: iio: adc: samsung,exynos-adc: Use correct IRQ level in example

[Krzysztof Kozlowski]

The interrupt line to GIC is IRQ_TYPE_LEVEL_HIGH, so use that instead of
"none".  Also replace the hard-coded GIC_SPI flag.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski at linaro.org>
---
 .../devicetree/bindings/iio/adc/samsung,exynos-adc.yaml    | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/iio/adc/samsung,exynos-adc.yaml b/Documentation/devicetree/bindings/iio/adc/samsung,exynos-adc.yaml
index 4e40f6bed5db..8069e99ddac8 100644
--- a/Documentation/devicetree/bindings/iio/adc/samsung,exynos-adc.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/samsung,exynos-adc.yaml
@@ -128,10 +128,12 @@ allOf:
 
 examples:
   - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
     adc: adc at 12d10000 {
         compatible = "samsung,exynos-adc-v1";
         reg = <0x12d10000 0x100>;
-        interrupts = <0 106 0>;
+        interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
         #io-channel-cells = <1>;
 
         clocks = <&clock 303>;
@@ -152,11 +154,12 @@ examples:
 
   - |
     #include <dt-bindings/clock/exynos3250.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
 
     adc at 126c0000 {
         compatible = "samsung,exynos3250-adc";
         reg = <0x126c0000 0x100>;
-        interrupts = <0 137 0>;
+        interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>;
         #io-channel-cells = <1>;
 
         clocks = <&cmu CLK_TSADC>,
-- 
2.48.1