[PATCH 2/4] dt-bindings: iio: adc: Replace hard-coded GPIO/IRQ flag with a define

[Krzysztof Kozlowski]

For readability use known defines instead of hard-coding GPIO or
interrupt flag.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski at linaro.org>
---
 Documentation/devicetree/bindings/iio/adc/maxim,max1241.yaml | 2 +-
 Documentation/devicetree/bindings/iio/adc/rohm,bd79124.yaml  | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/iio/adc/maxim,max1241.yaml b/Documentation/devicetree/bindings/iio/adc/maxim,max1241.yaml
index ef8d51e74c08..592854766583 100644
--- a/Documentation/devicetree/bindings/iio/adc/maxim,max1241.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/maxim,max1241.yaml
@@ -63,6 +63,6 @@ examples:
             vdd-supply = <&adc_vdd>;
             vref-supply = <&adc_vref>;
             spi-max-frequency = <1000000>;
-            shutdown-gpios = <&gpio 26 1>;
+            shutdown-gpios = <&gpio 26 GPIO_ACTIVE_LOW>;
         };
     };
diff --git a/Documentation/devicetree/bindings/iio/adc/rohm,bd79124.yaml b/Documentation/devicetree/bindings/iio/adc/rohm,bd79124.yaml
index 503285823376..4a8f127de7e3 100644
--- a/Documentation/devicetree/bindings/iio/adc/rohm,bd79124.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/rohm,bd79124.yaml
@@ -81,7 +81,7 @@ examples:
             reg = <0x10>;
 
             interrupt-parent = <&gpio1>;
-            interrupts = <29 8>;
+            interrupts = <29 IRQ_TYPE_LEVEL_LOW>;
 
             vdd-supply = <&dummyreg>;
             iovdd-supply = <&dummyreg>;
-- 
2.48.1