[PATCH v2] i2c: cadence: Add shutdown handler

[Michal Simek]

On 7/24/25 07:12, Ajay Neeli wrote:
> Implement shutdown function for Cadence I2C driver to suspend the bus
> during system "reboot" or "shutdown".
> 
> Interrupts are disabled in the handler to avoid spurious events when the
> driver is in slave mode.
> 
> Signed-off-by: Ajay Neeli <ajay.neeli at amd.com>
> ---
> Changes in V2:
> Disable interrupts
> ---
>   drivers/i2c/busses/i2c-cadence.c | 32 ++++++++++++++++++++++++++------
>   1 file changed, 26 insertions(+), 6 deletions(-)
> 
> diff --git a/drivers/i2c/busses/i2c-cadence.c b/drivers/i2c/busses/i2c-cadence.c
> index 8df63aa..e0a56df 100644
> --- a/drivers/i2c/busses/i2c-cadence.c
> +++ b/drivers/i2c/busses/i2c-cadence.c
> @@ -192,6 +192,7 @@ enum cdns_i2c_slave_state {
>    * @transfer_size:	The maximum number of bytes in one transfer
>    * @atomic:		Mode of transfer
>    * @err_status_atomic:	Error status in atomic mode
> + * @irq:		IRQ Number
>    */
>   struct cdns_i2c {
>   	struct device		*dev;
> @@ -224,6 +225,7 @@ struct cdns_i2c {
>   	unsigned int transfer_size;
>   	bool atomic;
>   	int err_status_atomic;
> +	int irq;
>   };
>   
>   struct cdns_platform_data {
> @@ -1495,7 +1497,7 @@ static int cdns_i2c_probe(struct platform_device *pdev)
>   {
>   	struct resource *r_mem;
>   	struct cdns_i2c *id;
> -	int ret, irq;
> +	int ret;
>   	const struct of_device_id *match;
>   
>   	id = devm_kzalloc(&pdev->dev, sizeof(*id), GFP_KERNEL);
> @@ -1526,9 +1528,9 @@ static int cdns_i2c_probe(struct platform_device *pdev)
>   	if (IS_ERR(id->membase))
>   		return PTR_ERR(id->membase);
>   
> -	irq = platform_get_irq(pdev, 0);
> -	if (irq < 0)
> -		return irq;
> +	id->irq = platform_get_irq(pdev, 0);
> +	if (id->irq < 0)
> +		return id->irq;
>   
>   	id->adap.owner = THIS_MODULE;
>   	id->adap.dev.of_node = pdev->dev.of_node;
> @@ -1590,10 +1592,10 @@ static int cdns_i2c_probe(struct platform_device *pdev)
>   		goto err_clk_notifier_unregister;
>   	}
>   
> -	ret = devm_request_irq(&pdev->dev, irq, cdns_i2c_isr, 0,
> +	ret = devm_request_irq(&pdev->dev, id->irq, cdns_i2c_isr, 0,
>   				 DRIVER_NAME, id);
>   	if (ret) {
> -		dev_err(&pdev->dev, "cannot get irq %d\n", irq);
> +		dev_err(&pdev->dev, "cannot get irq %d\n", id->irq);
>   		goto err_clk_notifier_unregister;
>   	}
>   	cdns_i2c_init(id);
> @@ -1636,6 +1638,23 @@ static void cdns_i2c_remove(struct platform_device *pdev)
>   	reset_control_assert(id->reset);
>   }
>   
> +/**
> + * cdns_i2c_shutdown - Shutdown the i2c device
> + * @pdev:	Handle to the platform device structure
> + *
> + * This function handles shutdown sequence
> + */
> +static void cdns_i2c_shutdown(struct platform_device *pdev)
> +{
> +	struct cdns_i2c *id = platform_get_drvdata(pdev);
> +
> +	/* Disable interrupts */
> +	disable_irq(id->irq);
> +
> +	/* Initiate failure of client i2c transfers */
> +	i2c_mark_adapter_suspended(&id->adap);
> +}
> +
>   static struct platform_driver cdns_i2c_drv = {
>   	.driver = {
>   		.name  = DRIVER_NAME,
> @@ -1644,6 +1663,7 @@ static void cdns_i2c_remove(struct platform_device *pdev)
>   	},
>   	.probe  = cdns_i2c_probe,
>   	.remove = cdns_i2c_remove,
> +	.shutdown = cdns_i2c_shutdown,
>   };
>   
>   module_platform_driver(cdns_i2c_drv);

Andi: I was checking other drivers and I can't see any other action which should 
be taken to have proper shutdown. Please let us know if driver should do 
something else too.

Acked-by: Michal Simek <michal.simek at amd.com>

Thanks,
Michal