[PATCH v2 2/4] arm64: dts: mediatek: mt8395-genio-1200-evk: Move common parts to dtsi

Macpaul Lin macpaul.lin at mediatek.com
Tue Jul 22 01:58:09 PDT 2025


In preparation for introducing the Genio 1200 EVK UFS board support, split
mt8395-genio-1200-evk.dts file in two to create mt8395-genio-common.dtsi
file, containing common definitions for both boards.

Signed-off-by: Macpaul Lin <macpaul.lin at mediatek.com>
---
 .../dts/mediatek/mt8395-genio-1200-evk.dts    | 1189 +----------------
 ...-1200-evk.dts => mt8395-genio-common.dtsi} |    4 -
 2 files changed, 1 insertion(+), 1192 deletions(-)
 copy arch/arm64/boot/dts/mediatek/{mt8395-genio-1200-evk.dts => mt8395-genio-common.dtsi} (99%)

Changes for v2:
 - Use git format-patch -C to generate a reviewable patch.

diff --git a/arch/arm64/boot/dts/mediatek/mt8395-genio-1200-evk.dts b/arch/arm64/boot/dts/mediatek/mt8395-genio-1200-evk.dts
index cf8cd37f5708..68455f28c246 100644
--- a/arch/arm64/boot/dts/mediatek/mt8395-genio-1200-evk.dts
+++ b/arch/arm64/boot/dts/mediatek/mt8395-genio-1200-evk.dts
@@ -6,1197 +6,10 @@
  */
 /dts-v1/;
 
-#include "mt8195.dtsi"
-#include "mt6359.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/pinctrl/mt8195-pinfunc.h>
-#include <dt-bindings/regulator/mediatek,mt6360-regulator.h>
-#include <dt-bindings/spmi/spmi.h>
-#include <dt-bindings/usb/pd.h>
+#include "mt8395-genio-common.dtsi"
 
 / {
 	model = "MediaTek Genio 1200 EVK-P1V2-EMMC";
 	compatible = "mediatek,mt8395-evk", "mediatek,mt8395",
 		     "mediatek,mt8195";
-
-	aliases {
-		serial0 = &uart0;
-		ethernet0 = ð
-	};
-
-	chosen {
-		stdout-path = "serial0:921600n8";
-	};
-
-	firmware {
-		optee {
-			compatible = "linaro,optee-tz";
-			method = "smc";
-		};
-	};
-
-	memory at 40000000 {
-		device_type = "memory";
-		reg = <0 0x40000000 0x2 0x00000000>;
-	};
-
-	reserved-memory {
-		#address-cells = <2>;
-		#size-cells = <2>;
-		ranges;
-
-		/*
-		 * 12 MiB reserved for OP-TEE (BL32)
-		 * +-----------------------+ 0x43e0_0000
-		 * |      SHMEM 2MiB       |
-		 * +-----------------------+ 0x43c0_0000
-		 * |        | TA_RAM  8MiB |
-		 * + TZDRAM +--------------+ 0x4340_0000
-		 * |        | TEE_RAM 2MiB |
-		 * +-----------------------+ 0x4320_0000
-		 */
-		optee_reserved: optee at 43200000 {
-			no-map;
-			reg = <0 0x43200000 0 0x00c00000>;
-		};
-
-		scp_mem: memory at 50000000 {
-			compatible = "shared-dma-pool";
-			reg = <0 0x50000000 0 0x2900000>;
-			no-map;
-		};
-
-		vpu_mem: memory at 53000000 {
-			compatible = "shared-dma-pool";
-			reg = <0 0x53000000 0 0x1400000>; /* 20 MB */
-		};
-
-		/* 2 MiB reserved for ARM Trusted Firmware (BL31) */
-		bl31_secmon_mem: memory at 54600000 {
-			no-map;
-			reg = <0 0x54600000 0x0 0x200000>;
-		};
-
-		adsp_mem: memory at 60000000 {
-			compatible = "shared-dma-pool";
-			reg = <0 0x60000000 0 0xf00000>;
-			no-map;
-		};
-
-		afe_dma_mem: memory at 60f00000 {
-			compatible = "shared-dma-pool";
-			reg = <0 0x60f00000 0 0x100000>;
-			no-map;
-		};
-
-		adsp_dma_mem: memory at 61000000 {
-			compatible = "shared-dma-pool";
-			reg = <0 0x61000000 0 0x100000>;
-			no-map;
-		};
-
-		apu_mem: memory at 62000000 {
-			compatible = "shared-dma-pool";
-			reg = <0 0x62000000 0 0x1400000>; /* 20 MB */
-		};
-	};
-
-	backlight_lcm0: backlight-lcm0 {
-		compatible = "pwm-backlight";
-		brightness-levels = <0 1023>;
-		default-brightness-level = <576>;
-		num-interpolated-steps = <1023>;
-		pwms = <&disp_pwm0 0 500000>;
-	};
-
-	backlight_lcd1: backlight-lcd1 {
-		compatible = "pwm-backlight";
-		pwms = <&disp_pwm1 0 500000>;
-		enable-gpios = <&pio 46 GPIO_ACTIVE_HIGH>;
-		brightness-levels = <0 1023>;
-		num-interpolated-steps = <1023>;
-		default-brightness-level = <576>;
-		status = "disabled";
-	};
-
-	can_clk: can-clk {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <20000000>;
-		clock-output-names = "can-clk";
-	};
-
-	edp_panel_fixed_3v3: regulator-0 {
-		compatible = "regulator-fixed";
-		regulator-name = "edp_panel_3v3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		enable-active-high;
-		gpio = <&pio 6 GPIO_ACTIVE_HIGH>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&edp_panel_3v3_en_pins>;
-	};
-
-	edp_panel_fixed_12v: regulator-1 {
-		compatible = "regulator-fixed";
-		regulator-name = "edp_backlight_12v";
-		regulator-min-microvolt = <12000000>;
-		regulator-max-microvolt = <12000000>;
-		enable-active-high;
-		gpio = <&pio 96 GPIO_ACTIVE_HIGH>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&edp_panel_12v_en_pins>;
-	};
-
-	keys: gpio-keys {
-		compatible = "gpio-keys";
-
-		button-volume-up {
-			wakeup-source;
-			debounce-interval = <100>;
-			gpios = <&pio 106 GPIO_ACTIVE_LOW>;
-			label = "volume_up";
-			linux,code = <KEY_VOLUMEUP>;
-		};
-	};
-
-	lcm0_iovcc: regulator-vio18-lcm0 {
-		compatible = "regulator-fixed";
-		regulator-name = "vio18_lcm0";
-		enable-active-high;
-		gpio = <&pio 47 GPIO_ACTIVE_HIGH>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&dsi0_vreg_en_pins>;
-		vin-supply = <&mt6360_ldo2>;
-	};
-
-	lcm0_vddp: regulator-vsys-lcm0 {
-		compatible = "regulator-fixed";
-		regulator-name = "vsys_lcm0";
-		regulator-always-on;
-		regulator-boot-on;
-		vin-supply = <&mt6360_ldo1>;
-	};
-
-	wifi_fixed_3v3: regulator-2 {
-		compatible = "regulator-fixed";
-		regulator-name = "wifi_3v3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		gpio = <&pio 135 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-		regulator-always-on;
-	};
-};
-
-&adsp {
-	memory-region = <&adsp_dma_mem>, <&adsp_mem>;
-	status = "okay";
-};
-
-&afe {
-	memory-region = <&afe_dma_mem>;
-	status = "okay";
-};
-
-&disp_pwm0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&disp_pwm0_pins>;
-	status = "okay";
-};
-
-&dither0_in {
-	remote-endpoint = <&gamma0_out>;
-};
-
-&dither0_out {
-	remote-endpoint = <&dsi0_in>;
-};
-
-&dmic_codec {
-	wakeup-delay-ms = <200>;
-};
-
-&dsi0 {
-	#address-cells = <1>;
-	#size-cells = <0>;
-	status = "okay";
-
-	panel at 0 {
-		compatible = "startek,kd070fhfid078", "himax,hx8279";
-		reg = <0>;
-		backlight = <&backlight_lcm0>;
-		enable-gpios = <&pio 48 GPIO_ACTIVE_HIGH>;
-		reset-gpios = <&pio 108 GPIO_ACTIVE_HIGH>;
-		iovcc-supply = <&lcm0_iovcc>;
-		vdd-supply = <&lcm0_vddp>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&panel_default_pins>;
-
-		port {
-			dsi_panel_in: endpoint {
-				remote-endpoint = <&dsi0_out>;
-			};
-		};
-	};
-
-	ports {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		port at 0 {
-			reg = <0>;
-			dsi0_in: endpoint {
-				remote-endpoint = <&dither0_out>;
-			};
-		};
-
-		port at 1 {
-			reg = <1>;
-			dsi0_out: endpoint {
-				remote-endpoint = <&dsi_panel_in>;
-			};
-		};
-	};
-};
-
-&eth {
-	phy-mode ="rgmii-rxid";
-	phy-handle = <&eth_phy0>;
-	snps,reset-gpio = <&pio 93 GPIO_ACTIVE_HIGH>;
-	snps,reset-delays-us = <0 10000 10000>;
-	mediatek,tx-delay-ps = <2030>;
-	mediatek,mac-wol;
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&eth_default_pins>;
-	pinctrl-1 = <&eth_sleep_pins>;
-	status = "okay";
-
-	mdio {
-		compatible = "snps,dwmac-mdio";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		eth_phy0: ethernet-phy at 1 {
-			compatible = "ethernet-phy-id001c.c916";
-			reg = <0x1>;
-		};
-	};
-};
-
-&gamma0_out {
-	remote-endpoint = <&dither0_in>;
-};
-
-&gpu {
-	mali-supply = <&mt6315_7_vbuck1>;
-	status = "okay";
-};
-
-&i2c0 {
-	clock-frequency = <400000>;
-	pinctrl-0 = <&i2c0_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-};
-
-&i2c1 {
-	clock-frequency = <400000>;
-	pinctrl-0 = <&i2c1_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-
-	touchscreen at 5d {
-		compatible = "goodix,gt9271";
-		reg = <0x5d>;
-		interrupts-extended = <&pio 132 IRQ_TYPE_EDGE_RISING>;
-		irq-gpios = <&pio 132 GPIO_ACTIVE_HIGH>;
-		reset-gpios = <&pio 133 GPIO_ACTIVE_HIGH>;
-		AVDD28-supply = <&mt6360_ldo1>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&touch_pins>;
-	};
-};
-
-&i2c2 {
-	clock-frequency = <400000>;
-	pinctrl-0 = <&i2c2_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-
-	typec-mux at 48 {
-		compatible = "ite,it5205";
-		reg = <0x48>;
-		vcc-supply = <&mt6359_vibr_ldo_reg>;
-		mode-switch;
-		orientation-switch;
-		status = "okay";
-
-		port {
-			it5205_sbu_ep: endpoint {
-				remote-endpoint = <&mt6360_ssusb_sbu_ep>;
-			};
-		};
-	};
-};
-
-&i2c6 {
-	clock-frequency = <400000>;
-	pinctrl-0 = <&i2c6_pins>;
-	pinctrl-names = "default";
-	#address-cells = <1>;
-	#size-cells = <0>;
-	status = "okay";
-
-	mt6360: pmic at 34 {
-		compatible = "mediatek,mt6360";
-		reg = <0x34>;
-		interrupt-parent = <&pio>;
-		interrupts = <128 IRQ_TYPE_EDGE_FALLING>;
-		interrupt-names = "IRQB";
-		interrupt-controller;
-		#interrupt-cells = <1>;
-		pinctrl-0 = <&mt6360_pins>;
-
-		charger {
-			compatible = "mediatek,mt6360-chg";
-			richtek,vinovp-microvolt = <14500000>;
-
-			otg_vbus_regulator: usb-otg-vbus-regulator {
-				regulator-name = "usb-otg-vbus";
-				regulator-min-microvolt = <4425000>;
-				regulator-max-microvolt = <5825000>;
-			};
-		};
-
-		regulator {
-			compatible = "mediatek,mt6360-regulator";
-			LDO_VIN3-supply = <&mt6360_buck2>;
-
-			mt6360_buck1: buck1 {
-				regulator-name = "emi_vdd2";
-				regulator-min-microvolt = <300000>;
-				regulator-max-microvolt = <1300000>;
-				regulator-allowed-modes = <MT6360_OPMODE_NORMAL
-							   MT6360_OPMODE_LP
-							   MT6360_OPMODE_ULP>;
-				regulator-always-on;
-			};
-
-			mt6360_buck2: buck2 {
-				regulator-name = "emi_vddq";
-				regulator-min-microvolt = <300000>;
-				regulator-max-microvolt = <1300000>;
-				regulator-allowed-modes = <MT6360_OPMODE_NORMAL
-							   MT6360_OPMODE_LP
-							   MT6360_OPMODE_ULP>;
-				regulator-always-on;
-			};
-
-			mt6360_ldo1: ldo1 {
-				regulator-name = "tp1_p3v0";
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-allowed-modes = <MT6360_OPMODE_NORMAL
-							   MT6360_OPMODE_LP>;
-				regulator-always-on;
-			};
-
-			mt6360_ldo2: ldo2 {
-				regulator-name = "panel1_p1v8";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-allowed-modes = <MT6360_OPMODE_NORMAL
-							   MT6360_OPMODE_LP>;
-			};
-
-			mt6360_ldo3: ldo3 {
-				regulator-name = "vmc_pmu";
-				regulator-min-microvolt = <1200000>;
-				regulator-max-microvolt = <3600000>;
-				regulator-allowed-modes = <MT6360_OPMODE_NORMAL
-							   MT6360_OPMODE_LP>;
-			};
-
-			mt6360_ldo5: ldo5 {
-				regulator-name = "vmch_pmu";
-				regulator-min-microvolt = <2700000>;
-				regulator-max-microvolt = <3600000>;
-				regulator-allowed-modes = <MT6360_OPMODE_NORMAL
-							   MT6360_OPMODE_LP>;
-			};
-
-			/* This is a measure point, which name is mt6360_ldo1 on schematic */
-			mt6360_ldo6: ldo6 {
-				regulator-name = "mt6360_ldo1";
-				regulator-min-microvolt = <500000>;
-				regulator-max-microvolt = <2100000>;
-				regulator-allowed-modes = <MT6360_OPMODE_NORMAL
-							   MT6360_OPMODE_LP>;
-			};
-
-			mt6360_ldo7: ldo7 {
-				regulator-name = "emi_vmddr_en";
-				regulator-min-microvolt = <500000>;
-				regulator-max-microvolt = <2100000>;
-				regulator-allowed-modes = <MT6360_OPMODE_NORMAL
-							   MT6360_OPMODE_LP>;
-				regulator-always-on;
-			};
-		};
-
-		tcpc {
-			compatible = "mediatek,mt6360-tcpc";
-			interrupts-extended = <&pio 17 IRQ_TYPE_LEVEL_LOW>;
-			interrupt-names = "PD_IRQB";
-
-			connector {
-				compatible = "usb-c-connector";
-				label = "USB-C";
-				data-role = "dual";
-				op-sink-microwatt = <10000000>;
-				power-role = "dual";
-				try-power-role = "sink";
-
-				source-pdos = <PDO_FIXED(5000, 1000,
-							 PDO_FIXED_DUAL_ROLE |
-							 PDO_FIXED_DATA_SWAP)>;
-				sink-pdos = <PDO_FIXED(5000, 2000,
-						       PDO_FIXED_DUAL_ROLE |
-						       PDO_FIXED_DATA_SWAP)>;
-
-				pd-revision = /bits/ 8 <0x03 0x01 0x01 0x06>;
-
-				altmodes {
-					displayport {
-						svid = /bits/ 16 <0xff01>;
-						vdo = <0x00001c46>;
-					};
-				};
-
-				ports {
-					#address-cells = <1>;
-					#size-cells = <0>;
-
-					port at 0 {
-						reg = <0>;
-						typec_con_hs: endpoint {
-							remote-endpoint = <&mtu3_hs0_role_sw>;
-						};
-					};
-
-					port at 1 {
-						reg = <1>;
-						typec_con_ss: endpoint {
-							remote-endpoint = <&mtu3_ss0_role_sw>;
-						};
-					};
-
-					port at 2 {
-						reg = <2>;
-						mt6360_ssusb_sbu_ep: endpoint {
-							remote-endpoint = <&it5205_sbu_ep>;
-						};
-					};
-				};
-			};
-		};
-	};
-};
-
-&mfg0 {
-	domain-supply = <&mt6315_7_vbuck1>;
-};
-
-&mfg1 {
-	domain-supply = <&mt6359_vsram_others_ldo_reg>;
-};
-
-&mipi_tx0 {
-	status = "okay";
-};
-
-&mmc0 {
-	status = "okay";
-	pinctrl-names = "default", "state_uhs";
-	pinctrl-0 = <&mmc0_default_pins>;
-	pinctrl-1 = <&mmc0_uhs_pins>;
-	bus-width = <8>;
-	max-frequency = <200000000>;
-	cap-mmc-highspeed;
-	mmc-hs200-1_8v;
-	mmc-hs400-1_8v;
-	cap-mmc-hw-reset;
-	no-sdio;
-	no-sd;
-	hs400-ds-delay = <0x14c11>;
-	vmmc-supply = <&mt6359_vemc_1_ldo_reg>;
-	vqmmc-supply = <&mt6359_vufs_ldo_reg>;
-	non-removable;
-};
-
-&mmc1 {
-	pinctrl-names = "default", "state_uhs";
-	pinctrl-0 = <&mmc1_default_pins>;
-	pinctrl-1 = <&mmc1_uhs_pins>;
-	bus-width = <4>;
-	max-frequency = <200000000>;
-	cap-sd-highspeed;
-	sd-uhs-sdr50;
-	sd-uhs-sdr104;
-	no-mmc;
-	no-sdio;
-	vmmc-supply = <&mt6360_ldo5>;
-	vqmmc-supply = <&mt6360_ldo3>;
-	status = "okay";
-	non-removable;
-};
-
-&mt6359_vaud18_ldo_reg {
-	regulator-always-on;
-};
-
-&mt6359_vbbck_ldo_reg {
-	regulator-always-on;
-};
-
-/* For USB Hub */
-&mt6359_vcamio_ldo_reg {
-	regulator-always-on;
-};
-
-&mt6359_vcn33_2_bt_ldo_reg {
-	regulator-min-microvolt = <3300000>;
-	regulator-max-microvolt = <3300000>;
-};
-
-&mt6359_vcore_buck_reg {
-	regulator-always-on;
-};
-
-&mt6359_vgpu11_buck_reg {
-	regulator-always-on;
-};
-
-&mt6359_vpu_buck_reg {
-	regulator-always-on;
-};
-
-&mt6359_vrf12_ldo_reg {
-	regulator-always-on;
-};
-
-/* for GPU SRAM */
-&mt6359_vsram_others_ldo_reg {
-	regulator-min-microvolt = <750000>;
-	regulator-max-microvolt = <750000>;
-};
-
-&mt6359codec {
-	mediatek,mic-type-0 = <1>; /* ACC */
-	mediatek,mic-type-1 = <3>; /* DCC */
-	mediatek,mic-type-2 = <1>; /* ACC */
-};
-
-&ovl0_in {
-	remote-endpoint = <&vdosys0_ep_main>;
-};
-
-&pcie0 {
-	pinctrl-names = "default", "idle";
-	pinctrl-0 = <&pcie0_default_pins>;
-	pinctrl-1 = <&pcie0_idle_pins>;
-	status = "okay";
-};
-
-&pcie1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pcie1_default_pins>;
-	status = "disabled";
-};
-
-&pciephy {
-	status = "okay";
-};
-
-&pio {
-	audio_default_pins: audio-default-pins {
-		pins-cmd-dat {
-			pinmux = <PINMUX_GPIO61__FUNC_DMIC1_CLK>,
-				 <PINMUX_GPIO62__FUNC_DMIC1_DAT>,
-				 <PINMUX_GPIO65__FUNC_PCM_DO>,
-				 <PINMUX_GPIO66__FUNC_PCM_CLK>,
-				 <PINMUX_GPIO67__FUNC_PCM_DI>,
-				 <PINMUX_GPIO68__FUNC_PCM_SYNC>,
-				 <PINMUX_GPIO69__FUNC_AUD_CLK_MOSI>,
-				 <PINMUX_GPIO70__FUNC_AUD_SYNC_MOSI>,
-				 <PINMUX_GPIO71__FUNC_AUD_DAT_MOSI0>,
-				 <PINMUX_GPIO72__FUNC_AUD_DAT_MOSI1>,
-				 <PINMUX_GPIO73__FUNC_AUD_DAT_MISO0>,
-				 <PINMUX_GPIO74__FUNC_AUD_DAT_MISO1>,
-				 <PINMUX_GPIO75__FUNC_AUD_DAT_MISO2>;
-		};
-	};
-
-	disp_pwm1_default_pins: disp-pwm1-default-pins {
-		pins1 {
-			pinmux = <PINMUX_GPIO104__FUNC_DISP_PWM1>;
-		};
-	};
-
-	edp_panel_12v_en_pins: edp-panel-12v-en-pins {
-		pins1 {
-			pinmux = <PINMUX_GPIO96__FUNC_GPIO96>;
-			output-high;
-		};
-	};
-
-	edp_panel_3v3_en_pins: edp-panel-3v3-en-pins {
-		pins1 {
-			pinmux = <PINMUX_GPIO6__FUNC_GPIO6>;
-			output-high;
-		};
-	};
-
-	eth_default_pins: eth-default-pins {
-		pins-cc {
-			pinmux = <PINMUX_GPIO85__FUNC_GBE_TXC>,
-				 <PINMUX_GPIO86__FUNC_GBE_RXC>,
-				 <PINMUX_GPIO87__FUNC_GBE_RXDV>,
-				 <PINMUX_GPIO88__FUNC_GBE_TXEN>;
-			drive-strength = <8>;
-		};
-
-		pins-mdio {
-			pinmux = <PINMUX_GPIO89__FUNC_GBE_MDC>,
-				 <PINMUX_GPIO90__FUNC_GBE_MDIO>;
-			input-enable;
-		};
-
-		pins-power {
-			pinmux = <PINMUX_GPIO91__FUNC_GPIO91>,
-				 <PINMUX_GPIO92__FUNC_GPIO92>;
-			output-high;
-		};
-
-		pins-rxd {
-			pinmux = <PINMUX_GPIO81__FUNC_GBE_RXD3>,
-				 <PINMUX_GPIO82__FUNC_GBE_RXD2>,
-				 <PINMUX_GPIO83__FUNC_GBE_RXD1>,
-				 <PINMUX_GPIO84__FUNC_GBE_RXD0>;
-		};
-
-		pins-txd {
-			pinmux = <PINMUX_GPIO77__FUNC_GBE_TXD3>,
-				 <PINMUX_GPIO78__FUNC_GBE_TXD2>,
-				 <PINMUX_GPIO79__FUNC_GBE_TXD1>,
-				 <PINMUX_GPIO80__FUNC_GBE_TXD0>;
-			drive-strength = <8>;
-		};
-	};
-
-	eth_sleep_pins: eth-sleep-pins {
-		pins-cc {
-			pinmux = <PINMUX_GPIO85__FUNC_GPIO85>,
-				 <PINMUX_GPIO86__FUNC_GPIO86>,
-				 <PINMUX_GPIO87__FUNC_GPIO87>,
-				 <PINMUX_GPIO88__FUNC_GPIO88>;
-		};
-
-		pins-mdio {
-			pinmux = <PINMUX_GPIO89__FUNC_GPIO89>,
-				 <PINMUX_GPIO90__FUNC_GPIO90>;
-			input-disable;
-			bias-disable;
-		};
-
-		pins-rxd {
-			pinmux = <PINMUX_GPIO81__FUNC_GPIO81>,
-				 <PINMUX_GPIO82__FUNC_GPIO82>,
-				 <PINMUX_GPIO83__FUNC_GPIO83>,
-				 <PINMUX_GPIO84__FUNC_GPIO84>;
-		};
-
-		pins-txd {
-			pinmux = <PINMUX_GPIO77__FUNC_GPIO77>,
-				 <PINMUX_GPIO78__FUNC_GPIO78>,
-				 <PINMUX_GPIO79__FUNC_GPIO79>,
-				 <PINMUX_GPIO80__FUNC_GPIO80>;
-		};
-	};
-
-	gpio_key_pins: gpio-keys-pins {
-		pins {
-			pinmux = <PINMUX_GPIO106__FUNC_GPIO106>;
-			bias-pull-up;
-			input-enable;
-		};
-	};
-
-	i2c0_pins: i2c0-pins {
-		pins {
-			pinmux = <PINMUX_GPIO8__FUNC_SDA0>,
-				 <PINMUX_GPIO9__FUNC_SCL0>;
-			bias-pull-up = <MTK_PULL_SET_RSEL_111>;
-			drive-strength-microamp = <1000>;
-		};
-	};
-
-	i2c1_pins: i2c1-pins {
-		pins {
-			pinmux = <PINMUX_GPIO10__FUNC_SDA1>,
-				 <PINMUX_GPIO11__FUNC_SCL1>;
-			bias-pull-up = <MTK_PULL_SET_RSEL_111>;
-			drive-strength-microamp = <1000>;
-		};
-	};
-
-	i2c2_pins: i2c2-pins {
-		pins {
-			pinmux = <PINMUX_GPIO12__FUNC_SDA2>,
-				 <PINMUX_GPIO13__FUNC_SCL2>;
-			bias-pull-up = <MTK_PULL_SET_RSEL_111>;
-			drive-strength = <6>;
-		};
-	};
-
-	i2c6_pins: i2c6-pins {
-		pins {
-			pinmux = <PINMUX_GPIO25__FUNC_SDA6>,
-				 <PINMUX_GPIO26__FUNC_SCL6>;
-			bias-pull-up;
-		};
-	};
-
-	mmc0_default_pins: mmc0-default-pins {
-		pins-clk {
-			pinmux = <PINMUX_GPIO122__FUNC_MSDC0_CLK>;
-			drive-strength = <6>;
-			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
-		};
-
-		pins-cmd-dat {
-			pinmux = <PINMUX_GPIO126__FUNC_MSDC0_DAT0>,
-				 <PINMUX_GPIO125__FUNC_MSDC0_DAT1>,
-				 <PINMUX_GPIO124__FUNC_MSDC0_DAT2>,
-				 <PINMUX_GPIO123__FUNC_MSDC0_DAT3>,
-				 <PINMUX_GPIO119__FUNC_MSDC0_DAT4>,
-				 <PINMUX_GPIO118__FUNC_MSDC0_DAT5>,
-				 <PINMUX_GPIO117__FUNC_MSDC0_DAT6>,
-				 <PINMUX_GPIO116__FUNC_MSDC0_DAT7>,
-				 <PINMUX_GPIO121__FUNC_MSDC0_CMD>;
-			input-enable;
-			drive-strength = <6>;
-			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
-		};
-
-		pins-rst {
-			pinmux = <PINMUX_GPIO120__FUNC_MSDC0_RSTB>;
-			drive-strength = <6>;
-			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
-		};
-	};
-
-	mmc0_uhs_pins: mmc0-uhs-pins {
-		pins-clk {
-			pinmux = <PINMUX_GPIO122__FUNC_MSDC0_CLK>;
-			drive-strength = <8>;
-			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
-		};
-
-		pins-cmd-dat {
-			pinmux = <PINMUX_GPIO126__FUNC_MSDC0_DAT0>,
-				 <PINMUX_GPIO125__FUNC_MSDC0_DAT1>,
-				 <PINMUX_GPIO124__FUNC_MSDC0_DAT2>,
-				 <PINMUX_GPIO123__FUNC_MSDC0_DAT3>,
-				 <PINMUX_GPIO119__FUNC_MSDC0_DAT4>,
-				 <PINMUX_GPIO118__FUNC_MSDC0_DAT5>,
-				 <PINMUX_GPIO117__FUNC_MSDC0_DAT6>,
-				 <PINMUX_GPIO116__FUNC_MSDC0_DAT7>,
-				 <PINMUX_GPIO121__FUNC_MSDC0_CMD>;
-			input-enable;
-			drive-strength = <8>;
-			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
-		};
-
-		pins-ds {
-			pinmux = <PINMUX_GPIO127__FUNC_MSDC0_DSL>;
-			drive-strength = <8>;
-			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
-		};
-
-		pins-rst {
-			pinmux = <PINMUX_GPIO120__FUNC_MSDC0_RSTB>;
-			drive-strength = <8>;
-			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
-		};
-	};
-
-	mmc1_default_pins: mmc1-default-pins {
-		pins-clk {
-			pinmux = <PINMUX_GPIO111__FUNC_MSDC1_CLK>;
-			drive-strength = <8>;
-			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
-		};
-
-		pins-cmd-dat {
-			pinmux = <PINMUX_GPIO110__FUNC_MSDC1_CMD>,
-				 <PINMUX_GPIO112__FUNC_MSDC1_DAT0>,
-				 <PINMUX_GPIO113__FUNC_MSDC1_DAT1>,
-				 <PINMUX_GPIO114__FUNC_MSDC1_DAT2>,
-				 <PINMUX_GPIO115__FUNC_MSDC1_DAT3>;
-			input-enable;
-			drive-strength = <8>;
-			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
-		};
-	};
-
-	mmc1_uhs_pins: mmc1-uhs-pins {
-		pins-clk {
-			pinmux = <PINMUX_GPIO111__FUNC_MSDC1_CLK>;
-			drive-strength = <8>;
-			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
-		};
-
-		pins-cmd-dat {
-			pinmux = <PINMUX_GPIO110__FUNC_MSDC1_CMD>,
-				 <PINMUX_GPIO112__FUNC_MSDC1_DAT0>,
-				 <PINMUX_GPIO113__FUNC_MSDC1_DAT1>,
-				 <PINMUX_GPIO114__FUNC_MSDC1_DAT2>,
-				 <PINMUX_GPIO115__FUNC_MSDC1_DAT3>;
-			input-enable;
-			drive-strength = <8>;
-			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
-		};
-	};
-
-	mt6360_pins: mt6360-pins {
-		pins {
-			pinmux = <PINMUX_GPIO17__FUNC_GPIO17>,
-				 <PINMUX_GPIO128__FUNC_GPIO128>;
-			input-enable;
-			bias-pull-up;
-		};
-	};
-
-	dsi0_vreg_en_pins: dsi0-vreg-en-pins {
-		pins-pwr-en {
-			pinmux = <PINMUX_GPIO47__FUNC_GPIO47>;
-			output-low;
-		};
-	};
-
-	panel_default_pins: panel-default-pins {
-		pins-rst {
-			pinmux = <PINMUX_GPIO108__FUNC_GPIO108>;
-			output-high;
-		};
-
-		pins-en {
-			pinmux = <PINMUX_GPIO48__FUNC_GPIO48>;
-			output-low;
-		};
-	};
-
-	pcie0_default_pins: pcie0-default-pins {
-		pins {
-			pinmux = <PINMUX_GPIO19__FUNC_WAKEN>,
-				 <PINMUX_GPIO20__FUNC_PERSTN>,
-				 <PINMUX_GPIO21__FUNC_CLKREQN>;
-			bias-pull-up;
-		};
-	};
-
-	pcie0_idle_pins: pcie0-idle-pins {
-		pins {
-			pinmux = <PINMUX_GPIO20__FUNC_GPIO20>;
-			bias-disable;
-			output-low;
-		};
-	};
-
-	pcie1_default_pins: pcie1-default-pins {
-		pins {
-			pinmux = <PINMUX_GPIO22__FUNC_PERSTN_1>,
-				 <PINMUX_GPIO23__FUNC_CLKREQN_1>,
-				 <PINMUX_GPIO24__FUNC_WAKEN_1>;
-			bias-pull-up;
-		};
-	};
-
-	disp_pwm0_pins: disp-pwm0-pins {
-		pins-disp-pwm {
-			pinmux = <PINMUX_GPIO97__FUNC_DISP_PWM0>;
-		};
-	};
-
-	spi1_pins: spi1-pins {
-		pins {
-			pinmux = <PINMUX_GPIO136__FUNC_SPIM1_CSB>,
-				 <PINMUX_GPIO137__FUNC_SPIM1_CLK>,
-				 <PINMUX_GPIO138__FUNC_SPIM1_MO>,
-				 <PINMUX_GPIO139__FUNC_SPIM1_MI>;
-			bias-disable;
-		};
-	};
-
-	spi2_pins: spi-pins {
-		pins {
-			pinmux = <PINMUX_GPIO140__FUNC_SPIM2_CSB>,
-				 <PINMUX_GPIO141__FUNC_SPIM2_CLK>,
-				 <PINMUX_GPIO142__FUNC_SPIM2_MO>,
-				 <PINMUX_GPIO143__FUNC_SPIM2_MI>;
-			bias-disable;
-		};
-	};
-
-	touch_pins: touch-pins {
-		pins-irq {
-			pinmux = <PINMUX_GPIO132__FUNC_GPIO132>;
-			input-enable;
-			bias-disable;
-		};
-
-		pins-reset {
-			pinmux = <PINMUX_GPIO133__FUNC_GPIO133>;
-			output-high;
-		};
-	};
-
-	u3_p0_vbus: u3-p0-vbus-default-pins {
-		pins-vbus {
-			pinmux = <PINMUX_GPIO63__FUNC_VBUSVALID>;
-			input-enable;
-		};
-	};
-
-	uart0_pins: uart0-pins {
-		pins {
-			pinmux = <PINMUX_GPIO98__FUNC_UTXD0>,
-				 <PINMUX_GPIO99__FUNC_URXD0>;
-		};
-	};
-
-	uart1_pins: uart1-pins {
-		pins {
-			pinmux = <PINMUX_GPIO100__FUNC_URTS1>,
-				 <PINMUX_GPIO101__FUNC_UCTS1>,
-				 <PINMUX_GPIO102__FUNC_UTXD1>,
-				 <PINMUX_GPIO103__FUNC_URXD1>;
-		};
-	};
-};
-
-&pmic {
-	interrupts-extended = <&pio 222 IRQ_TYPE_LEVEL_HIGH>;
-
-	mt6359keys: keys {
-		compatible = "mediatek,mt6359-keys";
-		mediatek,long-press-mode = <1>;
-		power-off-time-sec = <0>;
-
-		power-key {
-			linux,keycodes = <KEY_POWER>;
-			wakeup-source;
-		};
-
-		home {
-			linux,keycodes = <KEY_HOME>;
-		};
-	};
-};
-
-&scp {
-	memory-region = <&scp_mem>;
-	firmware-name = "mediatek/mt8195/scp.img";
-	status = "okay";
-};
-
-&sound {
-	compatible = "mediatek,mt8195_mt6359";
-	model = "mt8395-evk";
-	pinctrl-names = "default";
-	pinctrl-0 = <&audio_default_pins>;
-	audio-routing =
-		"Headphone", "Headphone L",
-		"Headphone", "Headphone R";
-	mediatek,adsp = <&adsp>;
-	status = "okay";
-
-	headphone-dai-link {
-		link-name = "DL_SRC_BE";
-
-		codec {
-			sound-dai = <&pmic 0>;
-		};
-	};
-};
-
-&spi1 {
-	pinctrl-0 = <&spi1_pins>;
-	pinctrl-names = "default";
-	mediatek,pad-select = <0>;
-	#address-cells = <1>;
-	#size-cells = <0>;
-	status = "okay";
-	cs-gpios = <&pio 64 GPIO_ACTIVE_LOW>;
-
-	can0: can at 0 {
-		compatible = "microchip,mcp2518fd";
-		reg = <0>;
-		clocks = <&can_clk>;
-		spi-max-frequency = <20000000>;
-		interrupts-extended = <&pio 16 IRQ_TYPE_LEVEL_LOW>;
-		vdd-supply = <&mt6359_vcn33_2_bt_ldo_reg>;
-		xceiver-supply = <&mt6359_vcn33_2_bt_ldo_reg>;
-	};
-};
-
-&spi2 {
-	pinctrl-0 = <&spi2_pins>;
-	pinctrl-names = "default";
-	mediatek,pad-select = <0>;
-	#address-cells = <1>;
-	#size-cells = <0>;
-	status = "okay";
-};
-
-&spmi {
-	#address-cells = <2>;
-	#size-cells = <0>;
-
-	mt6315_6: pmic at 6 {
-		compatible = "mediatek,mt6315-regulator";
-		reg = <0x6 SPMI_USID>;
-
-		regulators {
-			mt6315_6_vbuck1: vbuck1 {
-				regulator-name = "Vbcpu";
-				regulator-min-microvolt = <300000>;
-				regulator-max-microvolt = <1193750>;
-				regulator-enable-ramp-delay = <256>;
-				regulator-allowed-modes = <0 1 2>;
-				regulator-always-on;
-			};
-		};
-	};
-
-	mt6315_7: pmic at 7 {
-		compatible = "mediatek,mt6315-regulator";
-		reg = <0x7 SPMI_USID>;
-
-		regulators {
-			mt6315_7_vbuck1: vbuck1 {
-				regulator-name = "Vgpu";
-				regulator-min-microvolt = <546000>;
-				regulator-max-microvolt = <787000>;
-				regulator-enable-ramp-delay = <256>;
-				regulator-allowed-modes = <0 1 2>;
-			};
-		};
-	};
-};
-
-&u3phy0 {
-	status = "okay";
-};
-
-&u3phy1 {
-	status = "okay";
-
-	u3port1: usb-phy at 700 {
-		mediatek,force-mode;
-	};
-};
-
-&u3phy2 {
-	status = "okay";
-};
-
-&u3phy3 {
-	status = "okay";
-};
-
-&uart0 {
-	pinctrl-0 = <&uart0_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-};
-
-&uart1 {
-	pinctrl-0 = <&uart1_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-};
-
-&ufsphy {
-	status = "disabled";
-};
-
-&ssusb0 {
-	dr_mode = "otg";
-	pinctrl-names = "default";
-	pinctrl-0 = <&u3_p0_vbus>;
-	usb-role-switch;
-	vusb33-supply = <&mt6359_vusb_ldo_reg>;
-	status = "okay";
-
-	ports {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		port at 0 {
-			reg = <0>;
-			mtu3_hs0_role_sw: endpoint {
-				remote-endpoint = <&typec_con_hs>;
-			};
-		};
-
-		port at 1 {
-			reg = <1>;
-			mtu3_ss0_role_sw: endpoint {
-				remote-endpoint = <&typec_con_ss>;
-			};
-		};
-	};
-};
-
-&ssusb2 {
-	vusb33-supply = <&mt6359_vusb_ldo_reg>;
-	status = "okay";
-};
-
-&ssusb3 {
-	vusb33-supply = <&mt6359_vusb_ldo_reg>;
-	status = "okay";
-};
-
-&vdosys0 {
-	port {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		vdosys0_ep_main: endpoint at 0 {
-			reg = <0>;
-			remote-endpoint = <&ovl0_in>;
-		};
-	};
-};
-
-&xhci0 {
-	status = "okay";
-};
-
-&xhci1 {
-	vusb33-supply = <&mt6359_vusb_ldo_reg>;
-	status = "okay";
-};
-
-&xhci2 {
-	status = "okay";
-};
-
-&xhci3 {
-	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/mediatek/mt8395-genio-1200-evk.dts b/arch/arm64/boot/dts/mediatek/mt8395-genio-common.dtsi
similarity index 99%
copy from arch/arm64/boot/dts/mediatek/mt8395-genio-1200-evk.dts
copy to arch/arm64/boot/dts/mediatek/mt8395-genio-common.dtsi
index cf8cd37f5708..3b679626e8a1 100644
--- a/arch/arm64/boot/dts/mediatek/mt8395-genio-1200-evk.dts
+++ b/arch/arm64/boot/dts/mediatek/mt8395-genio-common.dtsi
@@ -17,10 +17,6 @@
 #include <dt-bindings/usb/pd.h>
 
 / {
-	model = "MediaTek Genio 1200 EVK-P1V2-EMMC";
-	compatible = "mediatek,mt8395-evk", "mediatek,mt8395",
-		     "mediatek,mt8195";
-
 	aliases {
 		serial0 = &uart0;
 		ethernet0 = ð
-- 
2.45.2




More information about the linux-arm-kernel mailing list