[PATCH 2/9] thermal/drivers/mediatek/lvts: Make number of calibration offsets configurable
Laura Nao
laura.nao at collabora.com
Mon Jul 21 01:14:52 PDT 2025
MT8196/MT6991 use 2-byte eFuse calibration data, whereas other SoCs
supported by the driver rely on 3 bytes. Make the number of calibration
bytes per sensor configurable, enabling support for SoCs with varying
calibration formats.
Signed-off-by: Laura Nao <laura.nao at collabora.com>
---
drivers/thermal/mediatek/lvts_thermal.c | 32 +++++++++++++++++--------
1 file changed, 22 insertions(+), 10 deletions(-)
diff --git a/drivers/thermal/mediatek/lvts_thermal.c b/drivers/thermal/mediatek/lvts_thermal.c
index 985925147ac0..8d5259b9d03b 100644
--- a/drivers/thermal/mediatek/lvts_thermal.c
+++ b/drivers/thermal/mediatek/lvts_thermal.c
@@ -96,12 +96,14 @@
#define LVTS_MINIMUM_THRESHOLD 20000
+#define LVTS_MAX_CAL_OFFSETS 3
+
static int golden_temp = LVTS_GOLDEN_TEMP_DEFAULT;
static int golden_temp_offset;
struct lvts_sensor_data {
int dt_id;
- u8 cal_offsets[3];
+ u8 cal_offsets[LVTS_MAX_CAL_OFFSETS];
};
struct lvts_ctrl_data {
@@ -125,6 +127,7 @@ struct lvts_ctrl_data {
struct lvts_data {
const struct lvts_ctrl_data *lvts_ctrl;
+ int num_cal_offsets;
int num_lvts_ctrl;
int temp_factor;
int temp_offset;
@@ -707,7 +710,7 @@ static int lvts_calibration_init(struct device *dev, struct lvts_ctrl *lvts_ctrl
u8 *efuse_calibration,
size_t calib_len)
{
- int i;
+ int i, j;
u32 gt;
/* A zero value for gt means that device has invalid efuse data */
@@ -716,17 +719,18 @@ static int lvts_calibration_init(struct device *dev, struct lvts_ctrl *lvts_ctrl
lvts_for_each_valid_sensor(i, lvts_ctrl_data) {
const struct lvts_sensor_data *sensor =
&lvts_ctrl_data->lvts_sensor[i];
+ u32 calib = 0;
- if (sensor->cal_offsets[0] >= calib_len ||
- sensor->cal_offsets[1] >= calib_len ||
- sensor->cal_offsets[2] >= calib_len)
- return -EINVAL;
+ for (j = 0; j < lvts_ctrl->lvts_data->num_cal_offsets; j++) {
+ u8 offset = sensor->cal_offsets[j];
+
+ if (offset >= calib_len)
+ return -EINVAL;
+ calib |= efuse_calibration[offset] << (8 * j);
+ }
if (gt) {
- lvts_ctrl->calibration[i] =
- (efuse_calibration[sensor->cal_offsets[0]] << 0) +
- (efuse_calibration[sensor->cal_offsets[1]] << 8) +
- (efuse_calibration[sensor->cal_offsets[2]] << 16);
+ lvts_ctrl->calibration[i] = calib;
} else if (lvts_ctrl->lvts_data->def_calibration) {
lvts_ctrl->calibration[i] = lvts_ctrl->lvts_data->def_calibration;
} else {
@@ -1743,6 +1747,7 @@ static const struct lvts_data mt7988_lvts_ap_data = {
.temp_factor = LVTS_COEFF_A_MT7988,
.temp_offset = LVTS_COEFF_B_MT7988,
.gt_calib_bit_offset = 24,
+ .num_cal_offsets = 3,
};
static const struct lvts_data mt8186_lvts_data = {
@@ -1752,6 +1757,7 @@ static const struct lvts_data mt8186_lvts_data = {
.temp_offset = LVTS_COEFF_B_MT7988,
.gt_calib_bit_offset = 24,
.def_calibration = 19000,
+ .num_cal_offsets = 3,
};
static const struct lvts_data mt8188_lvts_mcu_data = {
@@ -1761,6 +1767,7 @@ static const struct lvts_data mt8188_lvts_mcu_data = {
.temp_offset = LVTS_COEFF_B_MT8195,
.gt_calib_bit_offset = 20,
.def_calibration = 35000,
+ .num_cal_offsets = 3,
};
static const struct lvts_data mt8188_lvts_ap_data = {
@@ -1770,6 +1777,7 @@ static const struct lvts_data mt8188_lvts_ap_data = {
.temp_offset = LVTS_COEFF_B_MT8195,
.gt_calib_bit_offset = 20,
.def_calibration = 35000,
+ .num_cal_offsets = 3,
};
static const struct lvts_data mt8192_lvts_mcu_data = {
@@ -1779,6 +1787,7 @@ static const struct lvts_data mt8192_lvts_mcu_data = {
.temp_offset = LVTS_COEFF_B_MT8195,
.gt_calib_bit_offset = 24,
.def_calibration = 35000,
+ .num_cal_offsets = 3,
};
static const struct lvts_data mt8192_lvts_ap_data = {
@@ -1788,6 +1797,7 @@ static const struct lvts_data mt8192_lvts_ap_data = {
.temp_offset = LVTS_COEFF_B_MT8195,
.gt_calib_bit_offset = 24,
.def_calibration = 35000,
+ .num_cal_offsets = 3,
};
static const struct lvts_data mt8195_lvts_mcu_data = {
@@ -1797,6 +1807,7 @@ static const struct lvts_data mt8195_lvts_mcu_data = {
.temp_offset = LVTS_COEFF_B_MT8195,
.gt_calib_bit_offset = 24,
.def_calibration = 35000,
+ .num_cal_offsets = 3,
};
static const struct lvts_data mt8195_lvts_ap_data = {
@@ -1806,6 +1817,7 @@ static const struct lvts_data mt8195_lvts_ap_data = {
.temp_offset = LVTS_COEFF_B_MT8195,
.gt_calib_bit_offset = 24,
.def_calibration = 35000,
+ .num_cal_offsets = 3,
};
static const struct of_device_id lvts_of_match[] = {
--
2.39.5
More information about the linux-arm-kernel
mailing list