[PATCH v8 2/2] ARM: dts: aspeed: clemente: add Meta Clemente BMC

[Andrew Jeffery]

On Thu, 2025-07-17 at 22:59 +0800, Leo Wang wrote:
> From: Leo Wang <leo.jt.wang at gmail.com>
> 
> Add linux device tree entry for Meta Clemente compute-tray
> BMC using AST2600 SoC.
> 
> Signed-off-by: Leo Wang <leo.jt.wang at gmail.com>
> 

[...]

> +       };
> +
> +// PDB TEMP SENSOR

This comment should be indented appropriately?

> +       temperature-sensor at 4e {
> +               compatible = "ti,tmp1075";
> +               reg = <0x4e>;
> +       };
> 

[...]

> +
> +&i2c11 {
> +       status = "okay";
> +       aspeed,enable-byte;

This is not a property specified in any accepted binding, please drop
it.

   arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-clemente.dtb: i2c at 600 (aspeed,ast2600-i2c-bus): Unevaluated properties are not allowed ('aspeed,enable-byte' was unexpected)
   	from schema $id: http://devicetree.org/schemas/i2c/aspeed,i2c.yaml#

> +
> +       ssif-bmc at 10 {
> +               compatible = "ssif-bmc";
> +               reg = <0x10>;
> +       };
> +};
> 

[...]

> +
> diff --git a/arch/arm/boot/dts/aspeed/aspeed-g6-pinctrl.dtsi b/arch/arm/boot/dts/aspeed/aspeed-g6-pinctrl.dtsi
> index 289668f051eb4271ac48ae3ce9b82587911548ee..61b1d1c5040c820f8c995132739becde80e069bb 100644
> --- a/arch/arm/boot/dts/aspeed/aspeed-g6-pinctrl.dtsi
> +++ b/arch/arm/boot/dts/aspeed/aspeed-g6-pinctrl.dtsi
> @@ -412,6 +412,16 @@ pinctrl_mdio4_default: mdio4_default {
>                 groups = "MDIO4";
>         };
>  
> +       pinctrl_ncsi3_default: ncsi3_default {
> +               function = "RMII3";
> +               groups = "NCSI3";
> +       };
> +
> +       pinctrl_ncsi4_default: ncsi4_default {
> +               function = "RMII4";
> +               groups = "NCSI4";
> +       };
> +

Can you please make this a separate patch?

Thanks,

Andrew