[PATCH 4/4] arm64: dts: imx8mp: Add hdmi parallel audio interface node
Frank Li
Frank.li at nxp.com
Fri Jul 18 09:30:07 PDT 2025
On Fri, Jul 18, 2025 at 06:11:50PM +0800, Shengjiu Wang wrote:
> The HDMI TX Parallel Audio Interface (HTX_PAI) is a digital module that
> acts as the bridge between the Audio Subsystem to the HDMI TX Controller.
Remove " a digital module that acts as the" is more straightforward.
>
> Correct the register map of hdmi_pvi, which is overlapped with the
> hdmi_pai device.
Shrink register map size of hdmi_pvi to avoid overlapped hdmi_pai device.
>
> Signed-off-by: Shengjiu Wang <shengjiu.wang at nxp.com>
> ---
> arch/arm64/boot/dts/freescale/imx8mp-evk.dts | 4 +++
> arch/arm64/boot/dts/freescale/imx8mp.dtsi | 26 +++++++++++++++++++-
> 2 files changed, 29 insertions(+), 1 deletion(-)
>
> diff --git a/arch/arm64/boot/dts/freescale/imx8mp-evk.dts b/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
> index c0cc5611048e..cc9351a5bd65 100644
> --- a/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
> +++ b/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
> @@ -442,6 +442,10 @@ &flexcan2 {
> status = "disabled";/* can2 pin conflict with pdm */
> };
>
> +&hdmi_pai {
> + status = "okay";
> +};
> +
> &hdmi_pvi {
> status = "okay";
> };
> diff --git a/arch/arm64/boot/dts/freescale/imx8mp.dtsi b/arch/arm64/boot/dts/freescale/imx8mp.dtsi
> index bb24dba7338e..6e5a41f46309 100644
> --- a/arch/arm64/boot/dts/freescale/imx8mp.dtsi
> +++ b/arch/arm64/boot/dts/freescale/imx8mp.dtsi
> @@ -2063,7 +2063,7 @@ irqsteer_hdmi: interrupt-controller at 32fc2000 {
>
> hdmi_pvi: display-bridge at 32fc4000 {
> compatible = "fsl,imx8mp-hdmi-pvi";
> - reg = <0x32fc4000 0x1000>;
> + reg = <0x32fc4000 0x800>;
> interrupt-parent = <&irqsteer_hdmi>;
> interrupts = <12>;
> power-domains = <&hdmi_blk_ctrl IMX8MP_HDMIBLK_PD_PVI>;
> @@ -2089,6 +2089,22 @@ pvi_to_hdmi_tx: endpoint {
> };
> };
>
> + hdmi_pai: hdmi at 32fc4800 {
commit message it is bridge device, maybe audio-bridge is good node name
Frank
> + compatible = "fsl,imx8mp-hdmi-pai";
> + reg = <0x32fc4800 0x800>;
> + interrupt-parent = <&irqsteer_hdmi>;
> + interrupts = <14>;
> + power-domains = <&hdmi_blk_ctrl IMX8MP_HDMIBLK_PD_PAI>;
> + status = "disabled";
> +
> + port {
> +
> + pai_to_hdmi_tx: endpoint {
> + remote-endpoint = <&hdmi_tx_from_pai>;
> + };
> + };
> + };
> +
> lcdif3: display-controller at 32fc6000 {
> compatible = "fsl,imx8mp-lcdif";
> reg = <0x32fc6000 0x1000>;
> @@ -2140,6 +2156,14 @@ port at 1 {
> reg = <1>;
> /* Point endpoint to the HDMI connector */
> };
> +
> + port at 2 {
> + reg = <2>;
> +
> + hdmi_tx_from_pai: endpoint {
> + remote-endpoint = <&pai_to_hdmi_tx>;
> + };
> + };
> };
> };
>
> --
> 2.34.1
>
More information about the linux-arm-kernel
mailing list