[PATCH 3/7] arm64: zynqmp: Add cap-mmc-hw-reset and no-sd, no-sdio property to eMMC

[Michal Simek]

From: Paul Alvin <alvin.paulp at amd.com>

Add "cap-mmc-hw-reset" property to the eMMC DT node to perform the
eMMC device hardware reset.
Also, add "no-sd", "no-sdio" properties to eMMC DT node to skip
unwanted sd, sdio related commands during initialization for eMMC
device as this may lead to unnecessary register dump.

Signed-off-by: Paul Alvin <alvin.paulp at amd.com>
Signed-off-by: Michal Simek <michal.simek at amd.com>
---

 arch/arm64/boot/dts/xilinx/zynqmp-sm-k26-revA.dts | 3 +++
 arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts | 3 +++
 2 files changed, 6 insertions(+)

diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-sm-k26-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-sm-k26-revA.dts
index bfa7ea6b9224..51778df5540c 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-sm-k26-revA.dts
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-sm-k26-revA.dts
@@ -233,6 +233,9 @@ &sdhci0 { /* MIO13-23 - 16GB emmc MTFC16GAPALBH-IT - U133A */
 	pinctrl-0 = <&pinctrl_sdhci0_default>;
 	non-removable;
 	disable-wp;
+	no-sd;
+	no-sdio;
+	cap-mmc-hw-reset;
 	bus-width = <8>;
 	xlnx,mio-bank = <0>;
 	assigned-clock-rates = <187498123>;
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts
index 62c2503a502a..3542844e6977 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts
@@ -509,6 +509,9 @@ &sdhci1 {
 	xlnx,mio-bank = <0>;
 	non-removable;
 	disable-wp;
+	no-sd;
+	no-sdio;
+	cap-mmc-hw-reset;
 	cap-power-off-card;
 	mmc-pwrseq = <&sdio_pwrseq>;
 	vqmmc-supply = <&wmmcsdio_fixed>;
-- 
2.43.0