[PATCH v8 0/2] ARM: dts: Add support for Meta Clemente BMC

[Leo Wang]

This series adds initial support for the Meta Clemente BMC based on the
ASPEED AST2600 SoC.

Patch 1 documents the compatible string.
Patch 2 adds the device tree for the board.

Signed-off-by: Leo Wang <leo.jt.wang at gmail.com>
---
Changes in v8:
- Relocate IOBx_NICx_TEMP TMP421 sensors
- Enable byte mode for i2c11
- Link to v7: https://lore.kernel.org/r/20250716-add-support-for-meta-clemente-bmc-v7-0-d5bb7459c5aa@fii-foxconn.com

Changes in v7:
- Relocate CBC FRU EEPROMs from i2c13 to i2c12.
- Link to v6: https://lore.kernel.org/r/20250708-add-support-for-meta-clemente-bmc-v6-0-7f3e57bd0336@fii-foxconn.com

Changes in v6:
- Correct Author email to match Signed-off-by email address.
- Link to v5: https://lore.kernel.org/r/20250627-add-support-for-meta-clemente-bmc-v5-0-038ed6f1cb9f@fii-foxconn.com

Changes in v5:
- Remove accidentally pasted texts.
- Link to v4: https://lore.kernel.org/r/20250627-add-support-for-meta-clemente-bmc-v4-0-ce7ff23460c4@fii-foxconn.com

Changes in v4:
- Move properties of nodes defined in the same file from label ref back to where they belong.
- Move pinctrl default configs for ncsi3 and ncsi4 to aspeed-g6-pinctrl.dtsi.
- Add properties to i2c10 and i2c15 to enable MCTP.
- Link to v3: https://lore.kernel.org/r/20250623-add-support-for-meta-clemente-bmc-v3-0-c223ffcf46cf@fii-foxconn.com

Changes in v3:
- Modify leakage sensor to reflect current design.
- Link to v2: https://lore.kernel.org/r/20250621-add-support-for-meta-clemente-bmc-v2-0-6c5ef059149c@fii-foxconn.com

Changes in v2:
- Fix patch 1/2 subject line to match dt-bindings convention.
- Reorder device tree nodes in patch 2/2 to follow upstream DTS style.
- Link to v1: https://lore.kernel.org/r/20250618-add-support-for-meta-clemente-bmc-v1-0-e5ca669ee47b@fii-foxconn.com

---
Leo Wang (2):
      dt-bindings: arm: aspeed: add Meta Clemente board
      ARM: dts: aspeed: clemente: add Meta Clemente BMC

 .../devicetree/bindings/arm/aspeed/aspeed.yaml     |    1 +
 arch/arm/boot/dts/aspeed/Makefile                  |    1 +
 .../dts/aspeed/aspeed-bmc-facebook-clemente.dts    | 1295 ++++++++++++++++++++
 arch/arm/boot/dts/aspeed/aspeed-g6-pinctrl.dtsi    |   11 +
 4 files changed, 1308 insertions(+)
---
base-commit: 52da431bf03b5506203bca27fe14a97895c80faf
change-id: 20250618-add-support-for-meta-clemente-bmc-941a469bc523

Best regards,
-- 
Leo Wang <leo.jt.wang at fii-foxconn.com>