[PATCH V2 3/4] dt-bindings: media: ti: vpe: Add bindings for Video Input Port
Yemike Abhilash Chandra
y-abhilashchandra at ti.com
Wed Jul 16 04:19:11 PDT 2025
From: Dale Farnsworth <dale at farnsworth.org>
Add device tree bindings for the Video Input Port. Video Input Port (VIP)
can be found on devices such as DRA7xx and provides a parallel interface
to a video source such as a sensor or TV decoder.
Signed-off-by: Dale Farnsworth <dale at farnsworth.org>
Signed-off-by: Benoit Parrot <bparrot at ti.com>
Signed-off-by: Sukrut Bellary <sbellary at baylibre.com>
Signed-off-by: Yemike Abhilash Chandra <y-abhilashchandra at ti.com>
---
Changelog:
Changes in v2:
- Remove array and just use hsync: true in bindings
- Remove array and use enum for bus width in bindings
- Use pattern properties since properties across ports are same
- Update copyright year
.../devicetree/bindings/media/ti,vip.yaml | 211 ++++++++++++++++++
MAINTAINERS | 1 +
2 files changed, 212 insertions(+)
create mode 100644 Documentation/devicetree/bindings/media/ti,vip.yaml
diff --git a/Documentation/devicetree/bindings/media/ti,vip.yaml b/Documentation/devicetree/bindings/media/ti,vip.yaml
new file mode 100644
index 000000000000..44091c15a537
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/ti,vip.yaml
@@ -0,0 +1,211 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) 2025 Texas Instruments Incorporated - http://www.ti.com/
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/ti,vip.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments DRA7x VIDEO INPUT PORT (VIP).
+
+maintainers:
+ - Yemike Abhilash Chandra <y-abhilashchandra at ti.com>
+
+description: |-
+ The Video Input Port (VIP) is a key component for image capture
+ applications. The capture module provides the system interface and the
+ processing capability to connect parallel image-sensor as well as
+ BT.656/1120 capable encoder chip to DRA7x device.
+
+ Each VIP instance supports 2 independently configurable external video
+ input capture slices (Slice 0 and Slice 1) each providing up to two video
+ input ports (Port A and Port B) where Port A can be configured as
+ 24/16/8-bit port and Port B is fixed as 8-bit port.
+ Here these ports a represented as follows
+ port at 0 -> Slice 0 Port A
+ port at 1 -> Slice 0 Port B
+ port at 2 -> Slice 1 Port A
+ port at 3 -> Slice 1 Port B
+
+ Each camera port nodes should contain a 'port' child node with child
+ 'endpoint' node. Please refer to the bindings defined in
+ Documentation/devicetree/bindings/media/video-interfaces.yaml.
+
+properties:
+ compatible:
+ enum:
+ - ti,dra7-vip
+
+ label:
+ description: Instance name
+
+ reg:
+ items:
+ - description: The VIP main register region
+ - description: Video Data Parser (PARSER) register region for Slice0
+ - description: Color Space Conversion (CSC) register region for Slice0
+ - description: Scaler (SC) register region for Slice0
+ - description: Video Data Parser (PARSER) register region for Slice1
+ - description: Color Space Conversion (CSC) register region for Slice1
+ - description: Scaler (SC) register region for Slice1
+ - description: Video Port Direct Memory Access (VPDMA) register region
+
+ reg-names:
+ items:
+ - const: vip
+ - const: parser0
+ - const: csc0
+ - const: sc0
+ - const: parser1
+ - const: csc1
+ - const: sc1
+ - const: vpdma
+
+ interrupts:
+ minItems: 2
+ description:
+ IRQ index 0 is used for Slice0 interrupts
+ IRQ index 1 is used for Slice1 interrupts
+
+ ti,vip-clk-polarity:
+ $ref: /schemas/types.yaml#/definitions/phandle-array
+ description:
+ phandle to the device control module. The 1st argument should
+ contain the register offset to the CTRL_CORE_SMA_SW_1 register.
+ 2nd argument contains the bit field to slice 0 port A,
+ 3rd argument contains the bit field to slice 0 port B,
+ 4th argument contains the bit field to slice 1 port A,
+ 5th argument contains the bit field to slice 1 port B.
+
+patternProperties:
+ '^port@[0-3]$':
+ type: object
+ additionalProperties: false
+
+ properties:
+ "#address-cells":
+ const: 1
+
+ "#size-cells":
+ const: 0
+ reg:
+ description: The port number
+ maxItems: 1
+
+ label:
+ description: Port name. Usually the pin group name
+
+ endpoint:
+ $ref: /schemas/graph.yaml#/properties/endpoint
+ type: object
+ additionalProperties: false
+
+ properties:
+ hsync-active: true
+ vsync-active: true
+ pclk-sample: true
+ bus-width:
+ enum: [8, 24]
+ default: 8
+
+ remote-endpoint: true
+
+ required:
+ - "#address-cells"
+ - "#size-cells"
+ - port at 0
+ - reg
+ - label
+
+required:
+ - compatible
+ - label
+ - reg
+ - reg-names
+ - interrupts
+ - ti,vip-clk-polarity
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ vip1: vip at 48970000 {
+ compatible = "ti,dra7-vip1";
+ label = "vip1";
+ reg = <0x48970000 0x114>,
+ <0x48975500 0xD8>,
+ <0x48975700 0x18>,
+ <0x48975800 0x80>,
+ <0x48975a00 0xD8>,
+ <0x48975c00 0x18>,
+ <0x48975d00 0x80>,
+ <0x4897d000 0x400>;
+ reg-names = "vip",
+ "parser0",
+ "csc0",
+ "sc0",
+ "parser1",
+ "csc1",
+ "sc1",
+ "vpdma";
+ interrupts = <GIC_SPI 351 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 392 IRQ_TYPE_LEVEL_HIGH>;
+ ti,vip-clk-polarity = <&scm_conf 0x534 0x1 0x4 0x2 0x8>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ vin1a: port at 0 {
+ reg = <0>;
+ label = "vin1a";
+
+ vin1a_ep: endpoint {
+ remote-endpoint = <&camera1>;
+ hsync-active = <1>;
+ vsync-active = <1>;
+ pclk-sample = <0>;
+ bus-width = <8>;
+ };
+ };
+ vin1b: port at 1 {
+ reg = <1>;
+ label = "vin1b";
+ };
+ vin2a: port at 2 {
+ reg = <2>;
+ label = "vin2a";
+ };
+ vin2b: port at 3 {
+ reg = <3>;
+ label = "vin2b";
+ };
+ };
+ };
+
+ i2c {
+ clock-frequency = <400000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ camera at 37 {
+ compatible = "ovti,ov10633";
+ reg = <0x37>;
+
+ clocks = <&fixed_clock>;
+ clocks-names = "xvclk";
+
+ port {
+ camera1: endpoint {
+ remote-endpoint = <&vin1a_ep>;
+ hsync-active = <1>;
+ vsync-active = <1>;
+ pclk-sample = <0>;
+ bus-width = <8>;
+ };
+ };
+ };
+ };
+
+...
diff --git a/MAINTAINERS b/MAINTAINERS
index ea4b29c8b6b5..c5c5f0d1967f 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -25211,6 +25211,7 @@ S: Maintained
W: http://linuxtv.org/
Q: http://patchwork.linuxtv.org/project/linux-media/list/
F: Documentation/devicetree/bindings/media/ti,cal.yaml
+F: Documentation/devicetree/bindings/media/ti,vip.yaml
F: Documentation/devicetree/bindings/media/ti,vpe.yaml
F: drivers/media/platform/ti/cal/
F: drivers/media/platform/ti/vpe/
--
2.34.1
More information about the linux-arm-kernel
mailing list