[PATCH 1/2] arm64: dts: imx8mp: add idle cooling devices to cpu core

Martin Kepplinger martink at posteo.de
Mon Jul 14 22:59:22 PDT 2025


The thermal framework can use the cpu-idle-states as
described for imx8mp as an alternative or in parallel to
cpufreq.

Add the DT node to the cpu so the cooling devices will be present
and the thermal zone descriptions can use them.

Signed-off-by: Martin Kepplinger <martink at posteo.de>
---
 arch/arm64/boot/dts/freescale/imx8mp.dtsi | 20 ++++++++++++++++++++
 1 file changed, 20 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/imx8mp.dtsi b/arch/arm64/boot/dts/freescale/imx8mp.dtsi
index bb24dba7338ea..66e1a27d6eed9 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mp.dtsi
@@ -80,6 +80,11 @@ A53_0: cpu at 0 {
 			operating-points-v2 = <&a53_opp_table>;
 			#cooling-cells = <2>;
 			cpu-idle-states = <&cpu_pd_wait>;
+			cpu0_therm: thermal-idle {
+				#cooling-cells = <2>;
+				duration-us = <10000>;
+				exit-latency-us = <700>;
+			};
 		};
 
 		A53_1: cpu at 1 {
@@ -98,6 +103,11 @@ A53_1: cpu at 1 {
 			operating-points-v2 = <&a53_opp_table>;
 			#cooling-cells = <2>;
 			cpu-idle-states = <&cpu_pd_wait>;
+			cpu1_therm: thermal-idle {
+				#cooling-cells = <2>;
+				duration-us = <10000>;
+				exit-latency-us = <700>;
+			};
 		};
 
 		A53_2: cpu at 2 {
@@ -116,6 +126,11 @@ A53_2: cpu at 2 {
 			operating-points-v2 = <&a53_opp_table>;
 			#cooling-cells = <2>;
 			cpu-idle-states = <&cpu_pd_wait>;
+			cpu2_therm: thermal-idle {
+				#cooling-cells = <2>;
+				duration-us = <10000>;
+				exit-latency-us = <700>;
+			};
 		};
 
 		A53_3: cpu at 3 {
@@ -134,6 +149,11 @@ A53_3: cpu at 3 {
 			operating-points-v2 = <&a53_opp_table>;
 			#cooling-cells = <2>;
 			cpu-idle-states = <&cpu_pd_wait>;
+			cpu3_therm: thermal-idle {
+				#cooling-cells = <2>;
+				duration-us = <10000>;
+				exit-latency-us = <700>;
+			};
 		};
 
 		A53_L2: l2-cache0 {
-- 
2.39.5




More information about the linux-arm-kernel mailing list