[PATCH] iio: xilinx-ams: Fix AMS_ALARM_THR_DIRECT_MASK

Sean Anderson sean.anderson at linux.dev
Mon Jul 14 17:30:58 PDT 2025


AMS_ALARM_THR_DIRECT_MASK should be bit 0, not bit 1. This would cause
hysteresis to be enabled with a lower threshold of -28C. The temperature
alarm would never deassert even if the temperature dropped below the
upper threshold.

Fixes: d5c70627a794 ("iio: adc: Add Xilinx AMS driver")
Signed-off-by: Sean Anderson <sean.anderson at linux.dev>
---

 drivers/iio/adc/xilinx-ams.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/iio/adc/xilinx-ams.c b/drivers/iio/adc/xilinx-ams.c
index 76dd0343f5f7..552190dd0e6e 100644
--- a/drivers/iio/adc/xilinx-ams.c
+++ b/drivers/iio/adc/xilinx-ams.c
@@ -118,7 +118,7 @@
 #define AMS_ALARM_THRESHOLD_OFF_10	0x10
 #define AMS_ALARM_THRESHOLD_OFF_20	0x20
 
-#define AMS_ALARM_THR_DIRECT_MASK	BIT(1)
+#define AMS_ALARM_THR_DIRECT_MASK	BIT(0)
 #define AMS_ALARM_THR_MIN		0x0000
 #define AMS_ALARM_THR_MAX		(BIT(16) - 1)
 
-- 
2.35.1.1320.gc452695387.dirty




More information about the linux-arm-kernel mailing list