[PATCH 05/12] arm64: dts: imx8mm-kontron: Sort reg nodes alphabetically

[Frieder Schrempf]

From: Frieder Schrempf <frieder.schrempf at kontron.de>

Sort the regulator nodes alphabetically.

Signed-off-by: Frieder Schrempf <frieder.schrempf at kontron.de>
---
 .../dts/freescale/imx8mm-kontron-osm-s.dtsi   | 46 +++++++++----------
 1 file changed, 23 insertions(+), 23 deletions(-)

diff --git a/arch/arm64/boot/dts/freescale/imx8mm-kontron-osm-s.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-kontron-osm-s.dtsi
index d455429652305..264553248d5cc 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-kontron-osm-s.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm-kontron-osm-s.dtsi
@@ -30,29 +30,6 @@ chosen {
 		stdout-path = &uart3;
 	};
 
-	reg_vdd_carrier: regulator-vdd-carrier {
-		compatible = "regulator-fixed";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_reg_vdd_carrier>;
-		gpio = <&gpio3 16 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-		regulator-always-on;
-		regulator-boot-on;
-		regulator-name = "VDD_CARRIER";
-
-		regulator-state-standby {
-			regulator-on-in-suspend;
-		};
-
-		regulator-state-mem {
-			regulator-off-in-suspend;
-		};
-
-		regulator-state-disk {
-			regulator-off-in-suspend;
-		};
-	};
-
 	reg_usb1_vbus: regulator-usb1-vbus {
 		compatible = "regulator-fixed";
 		pinctrl-names = "default";
@@ -96,6 +73,29 @@ reg_usdhc3_vcc: regulator-usdhc3-vcc {
 		regulator-max-microvolt = <3300000>;
 		regulator-name = "VCC_SDIO_B";
 	};
+
+	reg_vdd_carrier: regulator-vdd-carrier {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_vdd_carrier>;
+		gpio = <&gpio3 16 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-name = "VDD_CARRIER";
+
+		regulator-state-standby {
+			regulator-on-in-suspend;
+		};
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+
+		regulator-state-disk {
+			regulator-off-in-suspend;
+		};
+	};
 };
 
 &A53_0 {
-- 
2.50.1