[PATCH 1/7] arm64: dts: ti: k3-j721s2-main: Add interrupts property

[Yemike Abhilash Chandra]

Add interrupts property for CDNS CSI2RX. Interrupt IDs are taken from the
J721S2 TRM [0].

Interrupt Line      | Source Interrupt
--------------------|----------------------------
GIC500SS_SPI_IN_153 | CSI_RX_IF1_CSI_ERR_IRQ_0
GIC500SS_SPI_IN_152 | CSI_RX_IF1_CSI_IRQ_0
GIC500SS_SPI_IN_157 | CSI_RX_IF2_CSI_ERR_IRQ_0
GIC500SS_SPI_IN_156 | CSI_RX_IF2_CSI_IRQ_0

[0]: https://www.ti.com/lit/zip/spruj28

Signed-off-by: Yemike Abhilash Chandra <y-abhilashchandra at ti.com>
---
 arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi b/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi
index 62f45377a2c9..6f32a2b0c40c 100644
--- a/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi
@@ -1248,6 +1248,9 @@ ti_csi2rx0: ticsi2rx at 4500000 {
 		cdns_csi2rx0: csi-bridge at 4504000 {
 			compatible = "ti,j721e-csi2rx", "cdns,csi2rx";
 			reg = <0x00 0x04504000 0x00 0x1000>;
+			interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error_irq", "irq";
 			clocks = <&k3_clks 38 3>, <&k3_clks 38 1>, <&k3_clks 38 3>,
 				<&k3_clks 38 3>, <&k3_clks 38 4>, <&k3_clks 38 4>;
 			clock-names = "sys_clk", "p_clk", "pixel_if0_clk",
@@ -1301,6 +1304,9 @@ ti_csi2rx1: ticsi2rx at 4510000 {
 		cdns_csi2rx1: csi-bridge at 4514000 {
 			compatible = "ti,j721e-csi2rx", "cdns,csi2rx";
 			reg = <0x00 0x04514000 0x00 0x1000>;
+			interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error_irq", "irq";
 			clocks = <&k3_clks 39 3>, <&k3_clks 39 1>, <&k3_clks 39 3>,
 				<&k3_clks 39 3>, <&k3_clks 39 4>, <&k3_clks 39 4>;
 			clock-names = "sys_clk", "p_clk", "pixel_if0_clk",
-- 
2.34.1