[PATCH 3/3] ARM: sti: drop B2120 board support

Raphael Gallais-Pou rgallaispou at gmail.com
Sun Jul 13 06:27:30 PDT 2025


B2120 boards are internal boards which never were commercialised.

Drop them.

Signed-off-by: Raphael Gallais-Pou <rgallaispou at gmail.com>
---
 arch/arm/boot/dts/st/Makefile           |   2 -
 arch/arm/boot/dts/st/stih407-b2120.dts  |  27 -----
 arch/arm/boot/dts/st/stih407.dtsi       | 145 ----------------------
 arch/arm/boot/dts/st/stih410-b2120.dts  |  66 ----------
 arch/arm/boot/dts/st/stihxxx-b2120.dtsi | 206 --------------------------------
 5 files changed, 446 deletions(-)

diff --git a/arch/arm/boot/dts/st/Makefile b/arch/arm/boot/dts/st/Makefile
index cc9948b9870f7f73629573149bfd342af75b07da..f57fc6dc48a00c9a9323b4508e5e4e161b197c47 100644
--- a/arch/arm/boot/dts/st/Makefile
+++ b/arch/arm/boot/dts/st/Makefile
@@ -13,8 +13,6 @@ dtb-$(CONFIG_ARCH_SPEAR3XX) += \
 dtb-$(CONFIG_ARCH_SPEAR6XX) += \
 	spear600-evb.dtb
 dtb-$(CONFIG_ARCH_STI) += \
-	stih407-b2120.dtb \
-	stih410-b2120.dtb \
 	stih410-b2260.dtb \
 	stih418-b2199.dtb \
 	stih418-b2264.dtb
diff --git a/arch/arm/boot/dts/st/stih407-b2120.dts b/arch/arm/boot/dts/st/stih407-b2120.dts
deleted file mode 100644
index 9c79982ee7ba8fadb1a2a92e732bf7f652b74c38..0000000000000000000000000000000000000000
--- a/arch/arm/boot/dts/st/stih407-b2120.dts
+++ /dev/null
@@ -1,27 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2014 STMicroelectronics (R&D) Limited.
- * Author: Giuseppe Cavallaro <peppe.cavallaro at st.com>
- */
-/dts-v1/;
-#include "stih407.dtsi"
-#include "stihxxx-b2120.dtsi"
-/ {
-	model = "STiH407 B2120";
-	compatible = "st,stih407-b2120", "st,stih407";
-
-	chosen {
-		stdout-path = &sbc_serial0;
-	};
-
-	memory at 40000000 {
-		device_type = "memory";
-		reg = <0x40000000 0x80000000>;
-	};
-
-	aliases {
-		serial0 = &sbc_serial0;
-		ethernet0 = &ethernet0;
-	};
-
-};
diff --git a/arch/arm/boot/dts/st/stih407.dtsi b/arch/arm/boot/dts/st/stih407.dtsi
deleted file mode 100644
index aca43d2bdaad44ef2a0e8a120c679c217709af44..0000000000000000000000000000000000000000
--- a/arch/arm/boot/dts/st/stih407.dtsi
+++ /dev/null
@@ -1,145 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2015 STMicroelectronics Limited.
- * Author: Gabriel Fernandez <gabriel.fernandez at linaro.org>
- */
-#include "stih407-clock.dtsi"
-#include "stih407-family.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-/ {
-	soc {
-		sti-display-subsystem at 0 {
-			compatible = "st,sti-display-subsystem";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <0 0>;
-			assigned-clocks = <&clk_s_d2_quadfs 0>,
-					  <&clk_s_d2_quadfs 1>,
-					  <&clk_s_c0_pll1 0>,
-					  <&clk_s_c0_flexgen CLK_COMPO_DVP>,
-					  <&clk_s_c0_flexgen CLK_MAIN_DISP>,
-					  <&clk_s_d2_flexgen CLK_PIX_MAIN_DISP>,
-					  <&clk_s_d2_flexgen CLK_PIX_AUX_DISP>,
-					  <&clk_s_d2_flexgen CLK_PIX_GDP1>,
-					  <&clk_s_d2_flexgen CLK_PIX_GDP2>,
-					  <&clk_s_d2_flexgen CLK_PIX_GDP3>,
-					  <&clk_s_d2_flexgen CLK_PIX_GDP4>;
-
-			assigned-clock-parents = <0>,
-						 <0>,
-						 <0>,
-						 <&clk_s_c0_pll1 0>,
-						 <&clk_s_c0_pll1 0>,
-						 <&clk_s_d2_quadfs 0>,
-						 <&clk_s_d2_quadfs 1>,
-						 <&clk_s_d2_quadfs 0>,
-						 <&clk_s_d2_quadfs 0>,
-						 <&clk_s_d2_quadfs 0>,
-						 <&clk_s_d2_quadfs 0>;
-
-			assigned-clock-rates = <297000000>,
-					       <108000000>,
-					       <0>,
-					       <400000000>,
-					       <400000000>;
-
-			ranges;
-
-			sti-compositor at 9d11000 {
-				compatible = "st,stih407-compositor";
-				reg = <0x9d11000 0x1000>;
-
-				clock-names = "compo_main",
-					      "compo_aux",
-					      "pix_main",
-					      "pix_aux",
-					      "pix_gdp1",
-					      "pix_gdp2",
-					      "pix_gdp3",
-					      "pix_gdp4",
-					      "main_parent",
-					      "aux_parent";
-
-				clocks = <&clk_s_c0_flexgen CLK_COMPO_DVP>,
-					 <&clk_s_c0_flexgen CLK_COMPO_DVP>,
-					 <&clk_s_d2_flexgen CLK_PIX_MAIN_DISP>,
-					 <&clk_s_d2_flexgen CLK_PIX_AUX_DISP>,
-					 <&clk_s_d2_flexgen CLK_PIX_GDP1>,
-					 <&clk_s_d2_flexgen CLK_PIX_GDP2>,
-					 <&clk_s_d2_flexgen CLK_PIX_GDP3>,
-					 <&clk_s_d2_flexgen CLK_PIX_GDP4>,
-					 <&clk_s_d2_quadfs 0>,
-					 <&clk_s_d2_quadfs 1>;
-
-				reset-names = "compo-main", "compo-aux";
-				resets = <&softreset STIH407_COMPO_SOFTRESET>,
-					 <&softreset STIH407_COMPO_SOFTRESET>;
-				st,vtg = <&vtg_main>, <&vtg_aux>;
-			};
-
-			sti-tvout at 8d08000 {
-				compatible = "st,stih407-tvout";
-				reg = <0x8d08000 0x1000>;
-				reg-names = "tvout-reg";
-				reset-names = "tvout";
-				resets = <&softreset STIH407_HDTVOUT_SOFTRESET>;
-				#address-cells = <1>;
-				#size-cells = <1>;
-				assigned-clocks = <&clk_s_d2_flexgen CLK_PIX_HDMI>,
-						  <&clk_s_d2_flexgen CLK_TMDS_HDMI>,
-						  <&clk_s_d2_flexgen CLK_REF_HDMIPHY>,
-						  <&clk_s_d0_flexgen CLK_PCM_0>,
-						  <&clk_s_d2_flexgen CLK_PIX_HDDAC>,
-						  <&clk_s_d2_flexgen CLK_HDDAC>;
-
-				assigned-clock-parents = <&clk_s_d2_quadfs 0>,
-							 <&clk_tmdsout_hdmi>,
-							 <&clk_s_d2_quadfs 0>,
-							 <&clk_s_d0_quadfs 0>,
-							 <&clk_s_d2_quadfs 0>,
-							 <&clk_s_d2_quadfs 0>;
-			};
-
-			sti_hdmi: sti-hdmi at 8d04000 {
-				compatible = "st,stih407-hdmi";
-				reg = <0x8d04000 0x1000>;
-				reg-names = "hdmi-reg";
-				#sound-dai-cells = <0>;
-				interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
-				interrupt-names = "irq";
-				clock-names = "pix",
-					      "tmds",
-					      "phy",
-					      "audio",
-					      "main_parent",
-					      "aux_parent";
-
-				clocks = <&clk_s_d2_flexgen CLK_PIX_HDMI>,
-					 <&clk_s_d2_flexgen CLK_TMDS_HDMI>,
-					 <&clk_s_d2_flexgen CLK_REF_HDMIPHY>,
-					 <&clk_s_d0_flexgen CLK_PCM_0>,
-					 <&clk_s_d2_quadfs 0>,
-					 <&clk_s_d2_quadfs 1>;
-
-				hdmi,hpd-gpio = <&pio5 3 GPIO_ACTIVE_LOW>;
-				reset-names = "hdmi";
-				resets = <&softreset STIH407_HDMI_TX_PHY_SOFTRESET>;
-				ddc = <&hdmiddc>;
-			};
-
-			sti-hda at 8d02000 {
-				compatible = "st,stih407-hda";
-				reg = <0x8d02000 0x400>, <0x92b0120 0x4>;
-				reg-names = "hda-reg", "video-dacs-ctrl";
-				clock-names = "pix",
-					      "hddac",
-					      "main_parent",
-					      "aux_parent";
-				clocks = <&clk_s_d2_flexgen CLK_PIX_HDDAC>,
-					 <&clk_s_d2_flexgen CLK_HDDAC>,
-					 <&clk_s_d2_quadfs 0>,
-					 <&clk_s_d2_quadfs 1>;
-			};
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/st/stih410-b2120.dts b/arch/arm/boot/dts/st/stih410-b2120.dts
deleted file mode 100644
index 538ff98ca1b1b6542f98a18f68968f030b8c55c0..0000000000000000000000000000000000000000
--- a/arch/arm/boot/dts/st/stih410-b2120.dts
+++ /dev/null
@@ -1,66 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2014 STMicroelectronics (R&D) Limited.
- * Author: Peter Griffin <peter.griffin at linaro.org>
- */
-/dts-v1/;
-#include "stih410.dtsi"
-#include "stihxxx-b2120.dtsi"
-/ {
-	model = "STiH410 B2120";
-	compatible = "st,stih410-b2120", "st,stih410";
-
-	chosen {
-		stdout-path = &sbc_serial0;
-	};
-
-	memory at 40000000 {
-		device_type = "memory";
-		reg = <0x40000000 0x80000000>;
-	};
-
-	aliases {
-		serial0 = &sbc_serial0;
-		ethernet0 = &ethernet0;
-	};
-
-	usb2_picophy1: phy2 {
-		status = "okay";
-	};
-
-	usb2_picophy2: phy3 {
-		status = "okay";
-	};
-
-	soc {
-
-		mmc0: sdhci at 9060000 {
-			max-frequency = <200000000>;
-			sd-uhs-sdr50;
-			sd-uhs-sdr104;
-			sd-uhs-ddr50;
-		};
-
-		ohci0: usb at 9a03c00 {
-			status = "okay";
-		};
-
-		ehci0: usb at 9a03e00 {
-			status = "okay";
-		};
-
-		ohci1: usb at 9a83c00 {
-			status = "okay";
-		};
-
-		ehci1: usb at 9a83e00 {
-			status = "okay";
-		};
-
-		sti-display-subsystem at 0 {
-			sti-hda at 8d02000 {
-				status = "okay";
-			};
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/st/stihxxx-b2120.dtsi b/arch/arm/boot/dts/st/stihxxx-b2120.dtsi
deleted file mode 100644
index 8d9a2dfa76f1fe55b954803cab8d00003a8ebec0..0000000000000000000000000000000000000000
--- a/arch/arm/boot/dts/st/stihxxx-b2120.dtsi
+++ /dev/null
@@ -1,206 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2014 STMicroelectronics (R&D) Limited.
- * Author: Giuseppe Cavallaro <peppe.cavallaro at st.com>
- */
-#include <dt-bindings/clock/stih407-clks.h>
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/media/c8sectpfe.h>
-/ {
-	leds {
-		compatible = "gpio-leds";
-		led-red {
-			label = "Front Panel LED";
-			gpios = <&pio4 1 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "heartbeat";
-		};
-		led-green {
-			gpios = <&pio1 3 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-	};
-
-	sound: sound {
-		compatible = "simple-audio-card";
-		simple-audio-card,name = "STI-B2120";
-		status = "okay";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		simple-audio-card,dai-link at 0 {
-			reg = <0>;
-			/* HDMI */
-			format = "i2s";
-			mclk-fs = <128>;
-			cpu {
-				sound-dai = <&sti_uni_player0>;
-			};
-
-			codec {
-				sound-dai = <&sti_hdmi>;
-			};
-		};
-
-		simple-audio-card,dai-link at 1 {
-			reg = <1>;
-			/* DAC */
-			format = "i2s";
-			mclk-fs = <256>;
-			frame-inversion;
-			cpu {
-				sound-dai = <&sti_uni_player2>;
-			};
-
-			codec {
-				sound-dai = <&sti_sasg_codec 1>;
-			};
-		};
-
-		simple-audio-card,dai-link at 2 {
-			reg = <2>;
-			/* SPDIF */
-			format = "left_j";
-			mclk-fs = <128>;
-			cpu {
-				sound-dai = <&sti_uni_player3>;
-			};
-
-			codec {
-				sound-dai = <&sti_sasg_codec 0>;
-			};
-		};
-	};
-
-	miphy28lp_phy: miphy28lp {
-
-		phy_port0: port at 9b22000 {
-			st,osc-rdy;
-		};
-
-		phy_port1: port at 9b2a000 {
-			st,osc-force-ext;
-		};
-	};
-
-	soc {
-		sbc_serial0: serial at 9530000 {
-			status = "okay";
-		};
-
-		pwm0: pwm at 9810000 {
-			status = "okay";
-		};
-
-		pwm1: pwm at 9510000 {
-			status = "okay";
-		};
-
-		ssc2: i2c at 9842000 {
-			status = "okay";
-			clock-frequency = <100000>;
-			st,i2c-min-scl-pulse-width-us = <0>;
-			st,i2c-min-sda-pulse-width-us = <5>;
-		};
-
-		ssc3: i2c at 9843000 {
-			status = "okay";
-			clock-frequency = <100000>;
-			st,i2c-min-scl-pulse-width-us = <0>;
-			st,i2c-min-sda-pulse-width-us = <5>;
-		};
-
-		i2c at 9844000 {
-			status = "okay";
-		};
-
-		i2c at 9845000 {
-			status = "okay";
-		};
-
-		i2c at 9540000 {
-			status = "okay";
-		};
-
-		mmc0: sdhci at 9060000 {
-			non-removable;
-			status = "okay";
-		};
-
-		mmc1: sdhci at 9080000 {
-			status = "okay";
-		};
-
-		/* SSC11 to HDMI */
-		hdmiddc: i2c at 9541000 {
-			status = "okay";
-			/* HDMI V1.3a supports Standard mode only */
-			clock-frequency = <100000>;
-			st,i2c-min-scl-pulse-width-us = <0>;
-			st,i2c-min-sda-pulse-width-us = <5>;
-		};
-
-		st_dwc3: dwc3 at 8f94000 {
-			status = "okay";
-		};
-
-		ethernet0: dwmac at 9630000 {
-			st,tx-retime-src = "clkgen";
-			status = "okay";
-			phy-mode = "rgmii";
-			fixed-link = <0 1 1000 0 0>;
-		};
-
-		demux at 8a20000 {
-			compatible	= "st,stih407-c8sectpfe";
-			status		= "okay";
-			reg		= <0x08a20000 0x10000>,
-					  <0x08a00000 0x4000>;
-			reg-names	= "c8sectpfe", "c8sectpfe-ram";
-			interrupts	= <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>,
-					  <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names	= "c8sectpfe-error-irq",
-					  "c8sectpfe-idle-irq";
-			pinctrl-0	= <&pinctrl_tsin0_serial>;
-			pinctrl-1	= <&pinctrl_tsin0_parallel>;
-			pinctrl-2	= <&pinctrl_tsin3_serial>;
-			pinctrl-3	= <&pinctrl_tsin4_serial_alt3>;
-			pinctrl-4	= <&pinctrl_tsin5_serial_alt1>;
-			pinctrl-names	= "tsin0-serial",
-					  "tsin0-parallel",
-					  "tsin3-serial",
-					  "tsin4-serial",
-					  "tsin5-serial";
-			clocks		= <&clk_s_c0_flexgen CLK_PROC_STFE>;
-			clock-names	= "c8sectpfe";
-
-			/* tsin0 is TSA on NIMA */
-			tsin0: port {
-				tsin-num = <0>;
-				serial-not-parallel;
-				i2c-bus = <&ssc2>;
-				reset-gpios = <&pio15 4 GPIO_ACTIVE_LOW>;
-				dvb-card = <STV0367_TDA18212_NIMA_1>;
-			};
-		};
-
-		sti_uni_player0: sti-uni-player at 8d80000 {
-			status = "okay";
-		};
-
-		sti_uni_player2: sti-uni-player at 8d82000 {
-			status = "okay";
-		};
-
-		sti_uni_player3: sti-uni-player at 8d85000 {
-			status = "okay";
-		};
-
-		syscfg_core: core-syscfg at 92b0000 {
-			sti_sasg_codec: sti-sasg-codec {
-				status = "okay";
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_spdif_out>;
-			};
-		};
-	};
-};

-- 
2.50.1




More information about the linux-arm-kernel mailing list